News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

My gen4/5 hybrid zx10r

Started by ukzx10r, November 14, 2015, 10:56:36 AM

Previous topic - Next topic

ukzx10r

Well it did concern me a little when i found out he had done a track day on it lol
But i track my bikes anyway so no difference
Gen4/5 hybrid

ukzx10r

#16
Little update of todays mods.
Changed the rear end to green and fitted indicator blanks.
Plus fitted indicators to the front behind the screen.
Standard.


Green



Infill panels



And front end.



Gen4/5 hybrid

michael4012

I like the front indicator set up :icon_thumleft: have a horse [clap]

ukzx10r

Quote from: michael4012 on November 27, 2015, 06:47:35 PM
I like the front indicator set up :icon_thumleft: have a horse [clap]
Think im gonna fit them on the back too
Gen4/5 hybrid

ukzx10r

Just fitted my custom akrapovic setup.
Its the 2009 zx10r akrapovic with the butterfly option fitted in the front to keep some of the back pressure and help reduce the noise.
The link pipe is custom made.
The standard cables were just long enough to fit.

Gen4/5 hybrid

Jak

Nice work  B-)

Did you retain the 02 sensor in the link pipe?

...........and did that do away with the need to remap the fuelling?

ukzx10r

Quote from: Jak on January 16, 2016, 11:01:24 AM
Nice work  B-)

Did you retain the 02 sensor in the link pipe?

...........and did that do away with the need to remap the fuelling?
Yes the sensor is fitted in the link pipe in the same location as standard and with the butterfly valve in the exhaust its should run closer to standard than the official akrapovic setup for the gen 4 so i believe it wont need remapping
Gen4/5 hybrid

Jak

I need to check (five wires) if a wide band sensor is fitted on this bike, which I think controls fueling over a wider range, but I'd be interested in your riding impressions as to how this mod affects fueling. I'm thinking of removing the cat, but retaining the sensor. Pipewerx have a link pipe to suit for about Ã,£50. I think the sensor only works in certain riding conditions, like idle and overrun, so not sure if a remap can be avoided  :icon_scratch:

(Ive recently PX'd my gen3 for a gen4)

ukzx10r

#23
Quote from: Jak on January 17, 2016, 09:28:31 AM
I need to check (five wires) if a wide band sensor is fitted on this bike, which I think controls fueling over a wider range, but I'd be interested in your riding impressions as to how this mod affects fueling. I'm thinking of removing the cat, but retaining the sensor. Pipewerx have a link pipe to suit for about Ã,£50. I think the sensor only works in certain riding conditions, like idle and overrun, so not sure if a remap can be avoided  :icon_scratch:

(Ive recently PX'd my gen3 for a gen4)
Sorry i dont understand what you are asking.
All exhausts for the gen 4 have sensor holes. You need the sensor in the exhaust. I cant understand why you wouldnt want it in there.
Ps ive just ridden it and it rides superb. Quieter than my old akra race setup
Gen4/5 hybrid

Jak

I'm learning about all this as I go, but it seems that the sensor leans the A/F mixture to around 14.7/1 This only occurs at certain throttle positions (idle/cruising/overrun) . It is generally removed on race bikes with an 02 eliminator in its place and the exhaust hole/boss is plugged. Full race systems, of course, have no provision for the sensor at all

The bike can then be tuned to run on an A/F ratio which I think is closer to 13, optimum for power. The sensor is used on road bikes, primarily to protect the cat and control emissions. With the cat removed, the sensor becomes less useful as the ECU can operate on an open loop to determine optimum fuelling from the throttle position sensor (tps)

I want to remove the cat, but retain the sensor if possible and avoid a remap. My understanding is that the bike will alternate between closed loop (sensor activated) and open loop (ECU) when throttle is opened under acceleration.

Basically I want more mid range power without the need for a power commander or other fuel modulator and you have perfectly answered my question as "it rides superb"   :icon_thumleft:


ukzx10r

I would like to know for sure that it wasnt used all of the time.
At the end of the day if it helps correct the a/f ratio at any point then its gotta be a good thing?
Mine does the occasional pop and bang on overrun but apparently thats to do with the smog system.
I think it sounds cool but people do block it off
Gen4/5 hybrid

ukzx10r

 i just cant leave anything alone and im always modifying it. It changes every week.
Spec;
Genuine gen5 bodykit. Standard stickers removed as i hated them. Way to tacky.
.
R1m calipers
.
Mupo rear shock. Uprated link plates.
.
Custom akrapovic exhaust.
K and n filter
.
.

.
Gen4/5 hybrid

zxyogi

Quote from: smith690 on November 24, 2015, 10:23:09 PM
Quote from: ukzx10r on November 14, 2015, 10:56:36 AM
Just got it from Bourmouth Kawasaki.
James hiller rode it (worrying lol) at odhiam track day.
Only mods so far is akka pipe and tail tidy. More will follow.
As i got it below and one with james riding it.
From what I saw he didn't hang around either, was great watching him though

Ahhh another 10R rider in Fleet.
I live in Fleet, ride a first Gen.
:icon_thumleft:

ukzx10r

Gen4/5 hybrid

davemfox

Nice one mate, have a pony :headbang:

Dave
1993 YZF 750 SP (in PINK/white as a homage to AndyJ)