News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

Secondaries Out - My thoughts / Photos

Started by FLuke, July 13, 2009, 07:54:11 AM

Previous topic - Next topic

HammyUK

PB also fitted completely different cams Andy.
I don't need 200BHP.........................ask the guys behind me!

slapknacker

yes but the cams were done after the the secondaries were removed.
think first mod was pc111, second mod secondaries out, third cam regrind etc.

pb also did it a while back 2yrs or so on a zx14r when Dale was doing the cannon ball run.
they got good gains low down.

so there results show an improvement. they also did it on a gixer750 that they big banged.

we all know they are there to allow the engine to breath at the correct rate at lower rpm levels
with a wide open throttle, remember cv carbs and flat slides.
stops the motor bogging down until the induction velocites have increased with engine rpm.
i'm too thick to make a banner, have tried at the banner maker site, can make one but cant get it uploaded. shyt shyt shty shyt.............
pissed of now!

HammyUK

The zzr benefitted because of the emissions programming strangling the motor.
The butterflies work because they effectively make the throttle bodies smaller and increase the speed that the gas flows at.
I don't need 200BHP.........................ask the guys behind me!

slapknacker

i'm too thick to make a banner, have tried at the banner maker site, can make one but cant get it uploaded. shyt shyt shty shyt.............
pissed of now!

HammyUK

It still amazes me how many people just take as gospel what goes about.
Same with the exhaust valve - mine made 3bhp and 8ftlb more with it connected.
I don't need 200BHP.........................ask the guys behind me!

drewk8

does it really matter for road use? :icon_scratch: my 08 was more than quick enough for me with just a growler fitted..  :shock:


boy... i miss her :crybaby2:

FLuke

tuner at moore speed said I could come in for another map to be made for £140 but said do you actually need more power / better response than you already have ?... how many times are you actually at full throttle flat out, very rare.

he said best way to fix my rich bike is just chuck optimax in it, said would see nice gains everywhere with it as it leans out engine a little...

one thing I'm sure of is with the flys out the bike feels like it pulls better low rpm, though still could be placebo effect as the intake really growls now. (makes me wonder if I screwed airbox down corrently lol)

www.bikevis.com - LED Running Lights

FLuke

Quote from: HammyUK on July 13, 2009, 10:04:43 PM
It still amazes me how many people just take as gospel what goes about.
Same with the exhaust valve - mine made 3bhp and 8ftlb more with it connected.

sounds better with it open though  :downtown:

www.bikevis.com - LED Running Lights

slapknacker

suppose if you race take them out, also the bar which they mount to and get the holes welded up.

road use and occasional track day , leave alone.

sure it sounds nicer with them out, but the extra 'go' you feel may be initial jolt forwards when you
open the throttle as the engine gets more air for a split second.

i'm too thick to make a banner, have tried at the banner maker site, can make one but cant get it uploaded. shyt shyt shty shyt.............
pissed of now!

r1ninja

.
Quote from: HammyUK on July 13, 2009, 10:04:43 PM
It still amazes me how many people just take as gospel what goes about.
Same with the exhaust valve - mine made 3bhp and 8ftlb more with it connected.

Made 3bhp more where in the rev range? No race exhaust manufacturer fits them to their system, they are mainly about noise emissions. 

Quote from: HammyUK on July 13, 2009, 09:50:01 PM
The butterflies work because they effectively make the throttle bodies smaller and increase the speed that the gas flows at.
Yep that's what primary butterflies are for ;) 

www.r1forum.co.uk

No-one needs more than seven fifty

HammyUK

Sounds the same as mine has benn de-catted anyway.
Had 3bhp  at the top end Andy and over 5bhp throug the midrange - the hole it left in the midrange disconnected was HUGE.
I don't need 200BHP.........................ask the guys behind me!

r1ninja

That's at odds with the Suzuki sytem then, they all make more power with the exhaust valve disconnected. Strange that it made more top end power then as at high revs the exhaust valve is fully open .

www.r1forum.co.uk

No-one needs more than seven fifty

HammyUK

Not sure why Andy - I just remember standing there at RJS while Rob tried all the combinations.
I don't need 200BHP.........................ask the guys behind me!

FLuke

put secondaries back in today and put map back how it was... fuel economy seemed to die (not that I care much but it was drinking the stuff) and also 1st gear from lights felt hard work

www.bikevis.com - LED Running Lights

stevejones1874

Quote from: FLuke on July 17, 2009, 01:06:42 PM
put secondaries back in today and put map back how it was... fuel economy seemed to die (not that I care much but it was drinking the stuff) and also 1st gear from lights felt hard work

I had heard if you put them back in you need to loctite the screws.  If they come loose you will be in big trouble.  Not sure how you do it and whether i'm 100% right.  Thought i'd better mention it.