News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

Secondaries Out - My thoughts / Photos

Started by FLuke, July 13, 2009, 07:54:11 AM

Previous topic - Next topic

FLuke

I know there is tons of topics on this but just thought I'd post some photos up of this operation on 06 ZX10

Already had a TRE so they opened early anyway but had some spare time so thought I'd give a shot.

- Removed sidepanels / seat
- Removed Airbox (once unbolted it's 'twists' out
- Unbolted tank but just swung round 180 degrees to allow access to butterflys without removing petrol pipe etc

the flys came out fine, after reading alot of horror storys was abit scared as apparently thread locked in, but a very long screw driver and lots of pressure meant they all moved first time no problems.

total time for job about 1hr...  the bike is definately improved and the power comes in very strong and fast at lower revs, feels alot stronger, especially at low revs in high gears. bike also sounds louder / more intake growl low revs. they are gonna be staying out for sure  :icon_thumright:








www.bikevis.com - LED Running Lights

gr8t1

which prob means you're burning hotter and now leaner. you might want it on the dyno now to make sure you're not running a lean engine

FLuke

yeah was thinking same, lot of guys run this mod without remap though,

gonna cost another £160 for a map grrrrrrrrr....  :crybaby2: :crybaby2:

www.bikevis.com - LED Running Lights

whufc0

was thinking about doing this,  do u wanna do mine  :-P

FLuke

got a dyno run booked for this afternoon to check bike over, will post up result later

www.bikevis.com - LED Running Lights

FLuke

just got back from dyno run, bike running very rich but was lean on tickover, so they tweaked that out. last time I ran about 166 at wheel, only 159 today :(  :crybaby2: :icon_scratch:

www.bikevis.com - LED Running Lights

whufc0

Dont think ill be taking mine out then  [rofl] [rofl] [rofl]

HammyUK

It only works when youh ave the airbox and head work to match as it only aids airflow at peak revs.
Wait till you see the torque curve disapear.......................
I don't need 200BHP.........................ask the guys behind me!

horse

Quote from: FLuke on July 13, 2009, 11:50:46 AM
yeah was thinking same, lot of guys run this mod without remap though,

gonna cost another £160 for a map grrrrrrrrr....  :crybaby2: :crybaby2:

Spk to Rob at RJS he'll map your bike and will not cost you that much. Havce removed my secondaries and he does all my work, top bloke.

Ride Hard! Play Hard!

HammyUK

You had no choice when you fitted the carbon airbox Horse............
I don't need 200BHP.........................ask the guys behind me!

ZX10R-RACER

its all a myth with these secondaries out, as they sit in-line with the throttle valve so wont cause any restriction as the air will be disrupted by the throttle (hard to explain in words but give it some thought)  , plus you have a great big fat bar in the bodies! 
ask any top engine tuner they`ll you the same, even cresent leave them in on there 210bhp+ BSB bikes, all this hype about this mod came from the yanks and what do they know! 

r1ninja

Remember dyno runs are done at full throttle so in theory the secondary butterflies  should be wide open through most of the rev range.  Liam don't forget that Crescent will most likey be using a fully programmable ecu so they can calibrate the  secondaries to be spot on.  It all depends on the bike, PB got great results removing them on the 08 model.

www.r1forum.co.uk

No-one needs more than seven fifty

ZX10R-RACER

i tried it on my bike with and without on my mates dyno that i use, and it made fook all difference, even tried different maps not a massive difference either way, even at 10,25,50,100% throttle very little difference through the range, only talking point of a bhp and that could even just be down to the temp of the fuel

r1ninja

Maybe they did a good job of the software algorithms in the ecu  for opening the secondaries on the 06/07 ?
Perhaps on the later bikes they are strangling them around the 5 -7k rpm mark for emissions and noise reasons ?

www.r1forum.co.uk

No-one needs more than seven fifty

ZX10R-RACER

dont know on that but i do know a few engine tuners say there is nothing to be gained.