News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

Help for spacers for the 08 blade callipers

Started by The Clam Jowster, July 01, 2009, 04:59:22 PM

Previous topic - Next topic

The Clam Jowster

Hi to all.  Have had a thread on this before reference this brake mod on the zx10 d7f.  I have got fed up of waiting for Blacks breakers to get a set of 4 calliper spacers from the 08 blade, i must have phoned them at least 12 times in 5 weeks as they said every week phone back monday, phone back wednesday and so on. :boxing: so i thought id get the measurements off a couple guys that have done the mod allready and have the spacers made i.e 24 mm Outer Diameter, 10 mm Inner hole and 5mm Thick and get them made as i dont really want to fork out £40 for a set of 4, so i pooped down to my localish machinest 20 mile away (this is afterall cornwall) and he said that it would come to around £45 as it will take an hour and half to do the job, so basiclly what im asking is, is there anyone out there that could do the job or know any contacts that can get hold off a set for a fraction of that price as the prices seem V excessive just for a set of spacers  :-(.  any help would be greatly appreciated as these brakes have been sitting in my garage for 5 weeks now and im hoping to have them fitted for mallory as i got the Mrs on the back and extra braking may be required. :icon_thumleft:
live life on the edge (same goes for your tyres)

allsorts

M8,just did a search,& stupot & Gix,managed to source spacers some time ago..
Give 'em a tug,you never know.. :icon_thumleft:

The Clam Jowster

live life on the edge (same goes for your tyres)

Shotgun

Might sound daft mate but have you thought of just using some 10mm washers. they do come in various outer diameters. If a couple make upto a bit more than 5mm it will not matter. :icon_thumleft:

The Clam Jowster

its a thought bud, but i just assumed as there is such force going through that small calliper that the recess that fits snug into the calliper/fork was there for a good reason to stop any kind of slipping, didnt fabcy messing with forces greater than me [naughty]
live life on the edge (same goes for your tyres)

ZX10R-RACER

remember there is a lip on the honda spacers so they press into the caliper, might not make much difference but i would`nt feel comfortable with some made up spacers as when there pressed in it`ll stop the calipers moving up/down under hard breaking  

The Clam Jowster

Agree. well if i dont get any joy with someone on the forum or another breaker i wlll just have to bite the bullet and order some monday for silly money :crybaby2:, really wana get the buggers on and get some hard braking on the go so i can get that little bit more out of he :icon_thumleft:
live life on the edge (same goes for your tyres)

steelcityboy


jamma10566

Hi Spence, I use washers for spacers and havent had a problem. Used 'em at Donington where braking into Esses and Melbourne Loop is pretty heavy and they were fine.
Sponsor me please, its a very good cause.
http://www.justgiving.com/James-CoryTakesabullet

The Clam Jowster

Cheers james. Good that they worked :icon_thumright:. Just had a PM off steelcityboy refernece getting some machined for me :icon_thumright: top man. if your at Mallory i will sort you out a few beers. Thanks for all the replies on this thread. see you guys in 10 days. :icon_thumright:
live life on the edge (same goes for your tyres)

The Clam Jowster

BHP to steelcityboy (Jon) for all your help on this.  Thats what i like about this forum theres alot of top Bikers out there who dont mind helping each other out.  Many thanks to all again, If i can help out in anyway for anyone then i will.  :icon_thumleft:
live life on the edge (same goes for your tyres)

HammyUK

I had mine machined by the guy that does our prototyping - £35 for the set.
I don't need 200BHP.........................ask the guys behind me!

The Clam Jowster

Thats not too bad, well at least you didnt have to give an extra fiver to Honda to make up the £40 they are charging like liam says. :dontknow: and the money went to someone who needs  it a bit more, did you get on all right with the origional kwaka bolts? or would you recomend honda bolts if they are the same thread of course.
live life on the edge (same goes for your tyres)

HammyUK

I use R1 titanium bolts from Probolt. 5mm longer and a hex head so no shitty allen head to chew.
I don't need 200BHP.........................ask the guys behind me!

The Clam Jowster

Ahh top man hammy, will have a look on line in a mo and order a set, sounds like the best way. cheers :icon_thumleft:
live life on the edge (same goes for your tyres)