News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

Help for spacers for the 08 blade callipers

Started by The Clam Jowster, July 01, 2009, 04:59:22 PM

Previous topic - Next topic

The Clam Jowster

live life on the edge (same goes for your tyres)

HammyUK

thats the ones but I'd still use Probolt - if it fucks up so are you.
I don't need 200BHP.........................ask the guys behind me!

The Clam Jowster

V true,  cheers for the info, im persuming its anty of the r1 years from 06 to 09
live life on the edge (same goes for your tyres)

HammyUK

If I remember right it the 02/04 - ring RJS, Rob 'll tell ya.
I don't need 200BHP.........................ask the guys behind me!

The Clam Jowster

Shall do, cheers again. enjoy the friday eve. I will be getting Ciderated indoors. :-P.
live life on the edge (same goes for your tyres)

HammyUK

I don't need 200BHP.........................ask the guys behind me!

The Clam Jowster

cornish cloudy cider, £9 a gallon.lol. Fucks your internals right up,  :shock: theres another called Criple cock. Does exactly what it says on the tin. [rofl]
live life on the edge (same goes for your tyres)

The Clam Jowster

 :-( :-(, oohhhh dear, why do i do it too myself. didnt hav the criple cock cider last night but it sure felt like it this morn, missus not to impressed :boxing: worth it though, sat up till 3 talking to myself and me cider and playing guitar hero. :icon_thumleft:
live life on the edge (same goes for your tyres)

slapknacker

Quote from: HammyUK on July 03, 2009, 07:07:21 PM
I use R1 titanium bolts from Probolt. 5mm longer and a hex head so no shitty allen head to chew.

indeed Hammy old fruit, when i first of all fitted longer bolts with spacers to my 10 i used allen head stainless bolts from probolt.
one of the heads chewed up straight away during fitting.

they had a special offer on titanium a month or so back, so i got them in flanged hex head titanium.
job done and look spiffing to say the least. :occasion14:
i'm too thick to make a banner, have tried at the banner maker site, can make one but cant get it uploaded. shyt shyt shty shyt.............
pissed of now!

The Clam Jowster

#24
ok, didnt go down the titanium route due to cash flow at the mo.  Got the stainless race spec bolts at £21 instead of over £50 for titanium, i will just have to shift me bowls before a ride to get rid of the 80g difference. Below is the link for anyone that fancies them if doing the mod.  Went for the 65mm as apposed to the origional 60mm to make up for the 5mm spacers added. Cheers for all the advise fellas, it is very much appreciated. :icon_thumleft:.


http://www.tastynuts.com/cgi-bin/sh000042.pl?REFPAGE=http%3a%2f%2fwww%2etastynuts%2ecom%2facatalog%2fsearch%2ehtml&WD=65mm%20race%20hex&PN=Stainless_Steel_Race_Spec_Bolts_%2d_New___%2ehtml%23aSSHX1065FR#aSSHX1065FR
live life on the edge (same goes for your tyres)

ZX10R-RACER

65mm will be fine but if anyone else is doing this remember you dont need longer bolts because even though the honda`s use spacers the caliper is`nt any further back, plus the depth of the caliper with the spacers is the same as the stock caliper

The Clam Jowster

fair point liam. i did measure the blade callipers and they worked out at 37mm as opposed to 40mm on the stock kwaka ones so with the extra 5mm spacers it worked out at loosing 2mm so i was just going on the safe side and having 3mm more as opposed to 2mm less.
live life on the edge (same goes for your tyres)

ZX10R-RACER

well suppose you need all the length you can get, not something i suffer from  [whistle] [whistle]

The Clam Jowster

lucky you hey, do you have to fold it in half when you use it to get the girth.?
live life on the edge (same goes for your tyres)

slapknacker

regarding bolt lenght,

what you need for a mechanicaly sound fixing is for the bolt to screw into the
thread by 1.5 times its diameter.

e.g. a 10mm bolt needs to go 15mm into the thread hole.
also remember on most threaded holes there is a 1 to 1.5mm counter sunk
lead which must also be taken into account. so in the example above you
would need 16.5mm of bolt protrusion to make a sound fixing.

soz to be technical but you cant fudge brakes :icon_thumleft:
i'm too thick to make a banner, have tried at the banner maker site, can make one but cant get it uploaded. shyt shyt shty shyt.............
pissed of now!