News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

Ref my Fuel problems!

Started by horse, March 22, 2008, 11:58:21 PM

Previous topic - Next topic

horse

Have sorted problem:



Have just bought, no blocked injectors are going to beat me  [rofl] only need injectors so if anybody needs spares you know where I am!!!

Ride Hard! Play Hard!

Andy J

glad to see you bought em fella  :icon_thumright:

GRNINJA

Ride it like you stole it - or at least try

horse


Ride Hard! Play Hard!

GRNINJA

Ride it like you stole it - or at least try

horse


Ride Hard! Play Hard!

Chrisblack10r



Volkswagen Master Technician with an 08 zx10r with 181.4 BHP at the back wheel hahaha!!!!!

GRNINJA

Ride it like you stole it - or at least try

horse

See Chinese whispers strike again! was nothing to do with welding! when I had fuel cap fitted to new tank  the bolt holes had to be drilled into new filler neck. Now before fitting tank I thought I had cleaned all the aluminium fillings and swarf out off tank. It is now obvious that I had not done such a good job as I had thought. Apparently it doesn't take a piece off crap the size off Bismark to block injectors........................well u learn!

So at least I have a complete spare set off throttle bodies now out off this  [rofl]

Ride Hard! Play Hard!

Chrisblack10r

#9
how did the metal get through the filter in the pump???


Volkswagen Master Technician with an 08 zx10r with 181.4 BHP at the back wheel hahaha!!!!!

horse

Quote from: Chrisblack10r on March 23, 2008, 01:37:17 PM
how did the metal get through the filter in the pump???

That was my question! but were not talking about metal bits you can see. It was very fine Ali powder....................

Ride Hard! Play Hard!

Chrisblack10r

Quote from: horse on March 23, 2008, 01:57:41 PM
Quote from: Chrisblack10r on March 23, 2008, 01:37:17 PM
how did the metal get through the filter in the pump???

That was my question! but were not talking about metal bits you can see. It was very fine Ali powder....................

little bastard's lol

all's well that ends well


Volkswagen Master Technician with an 08 zx10r with 181.4 BHP at the back wheel hahaha!!!!!

gopher

Thats shite luck horse  :crybaby2: And your right it does not take alot We had a 250hp tractor seize on the dyno after a rebuild. Stripped it down and found a tiny (and i mean tiny) piece of rag/fluff blocking an oilway to a main bearing... Not good Glad it's sorted  :icon_thumright:

mr K seems to have given me 50hp to much!!! but i think i can manage. O K maybe with a bit  more practice !!

slapknacker

glad you sorted mate, how about boring out the throttle bodys for more go go :lol:
i'm too thick to make a banner, have tried at the banner maker site, can make one but cant get it uploaded. shyt shyt shty shyt.............
pissed of now!

r1ninja

Quote from: slapknacker on March 23, 2008, 07:33:44 PM
glad you sorted mate, how about boring out the throttle bodys for more go go :lol:
Yesterdays idea. These days they go for oval cross section to get a larger area and the correct airflow "shape" to go around the bend in the intake port

www.r1forum.co.uk

No-one needs more than seven fifty