News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

Dash colour change

Started by Chrisblack10r, September 28, 2007, 04:23:33 PM

Previous topic - Next topic

supergirl

how long did it take you in the end?
the race is long and in the end, its only against yourself...

ADF

Quote from: Chrisblack10r on November 22, 2007, 12:54:00 AM
what make is it dude?

Its the Acumen one Chris, i just need the loom for the 10r instead of the R1 and it will work but its just the wrong colour, is that the same as yours? if so just swap the actual unit?


Chrisblack10r

sorry mate, mines a datatool unit so is soldered into the rear of the clocks, so if im honest mate i dont wanna be cutting it back out

thanks for showing an interest tho

chris


Volkswagen Master Technician with an 08 zx10r with 181.4 BHP at the back wheel hahaha!!!!!

zapik

Quote from: Chrisblack10r on November 22, 2007, 09:42:55 AM
Quote from: rotax81 on November 22, 2007, 08:56:09 AM
did it take you till 1.28am to do it  :lol:

was gonna change mine to red, is it just a change of LED's or is it resistors as well?

nah mate, just left it till late to take a pic so it was nice and dark in the garage

yeah its just the led's that need replacing, they are surface mount LED's so you will need a small needle soldering iron, mine was 15 watt i think so not to heat the board to much

i had to get another set of LED's tho as i found out the hard way that you cant heat them more than 3-4 secs or it just kills the LED's

but i have a multi meter which will test them so once fitted to the board i checked they where ok then rebuilt the clocks and all was fine, all in all it took me about 2.5 hours to do


I've got a Wella temperature controlled 45 watt Job.  I just need to get some new tips for it. Sponge is OK.  Something to do over the winter. :)
Absolutely no talent whatsoever. The older I get the faster I was.
05ZX10R in the proper colour.

Chrisblack10r

just be careful not to over heat the board with the 45 watt soldering iron

guy in maplin said 15 watt was fine for board soldering


Volkswagen Master Technician with an 08 zx10r with 181.4 BHP at the back wheel hahaha!!!!!

ADF

Quote from: Chrisblack10r on November 22, 2007, 06:46:55 PM
sorry mate, mines a datatool unit so is soldered into the rear of the clocks, so if im honest mate i dont wanna be cutting it back out

thanks for showing an interest tho

chris

Ok Chris, No probs looks like its going on Fleabay then and buy a new one at the NEC

Cheers