News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

Carbon Can

Started by Chrisblack10r, June 27, 2007, 06:18:53 PM

Previous topic - Next topic

Chrisblack10r

Hi all,

just wondering if there was anything i could use to clean up the carbon on my new arkra carbon can?

has faded in the light it looks like, so was thinking about a rubbing compound or something

any ideas

chris


Volkswagen Master Technician with an 08 zx10r with 181.4 BHP at the back wheel hahaha!!!!!

Andy J

keep it shaded in my garage  [whistle] [rofl]

nah sorry Chris don't know  :roll:

KEIRON10R

Quote from: Andy J on June 27, 2007, 06:25:58 PM
keep it shaded in my garage  [whistle] [rofl]

nah sorry Chris don't know  :roll:
:lol: you got too much time on ya hands  [rofl]

Andy J


Kwakaholic



Being Farbon Kyber Expert for a job, ( honestly ! ) we tart up our demo samples wi black shoe polish  :hello2:  Most cosmetic stuff like Cans and Fairing n bits o shit you bikey types buy usually have a UV inhibitor in the resin system, but it dun't help for long.  Best thing to do is Paint it wi Black Enamel  [rofl] [rofl] [rofl]
Biking's no more dangerous than a loaded gun.... are ya " F eeling Lucky ? "
...... them thats never tried it don't know what there missin'

slapknacker

try some of that armourall stuff you get from halfords.
i'm too thick to make a banner, have tried at the banner maker site, can make one but cant get it uploaded. shyt shyt shty shyt.............
pissed of now!

simple

I don't reckon anything you can do Chris , my carbon Akras ( yes , I've got 2  [rofl] ) are not THAT dark in the sunlight and I reckon if you start fucking about with it you will lose the carbon effect  :dontknow:
Taking it back to the old skool !

Chrisblack10r

yeah might just fook it up even more, might use it for this summer and then re-sleave it in the winter


Volkswagen Master Technician with an 08 zx10r with 181.4 BHP at the back wheel hahaha!!!!!

Kwakaholic


The carbon effect eld chum isn't an   "effect"   its a structural material ! You won't rub it off   [wall]..... a typical 2-2 twill 6k woven fabric at 38% v'f  and with Tg of

around 90 deg's C will be about 0.25mm per ply.  What you will do is remove the surface resin ( the glossy bit ) which will leave it Matt.  Hence the shoe polish, if

you have removed the surface couple o thou,  shoe polish should still work .   Unless of course you're under 45 in which case you have probably never heard of

shoe polish .....  [rofl] [rofl] [rofl]

NB this does of course pre-suppose your Cans arn't cover in carbon "effect"  fablon !!!!  [rofl]
Biking's no more dangerous than a loaded gun.... are ya " F eeling Lucky ? "
...... them thats never tried it don't know what there missin'

Chrisblack10r

nah deffernantly carbon fibre, i didnt know they where so lite in weight tho

might try a bit of kiwi black on the back where it cant be seen to see if it helps out any


Volkswagen Master Technician with an 08 zx10r with 181.4 BHP at the back wheel hahaha!!!!!

simple

Quote from: Kwakaholic on June 30, 2007, 11:00:29 AM

The carbon effect eld chum isn't an   "effect"   its a structural material ! You won't rub it off   [wall]..... a typical 2-2 twill 6k woven fabric at 38% v'f  and with Tg of

around 90 deg's C will be about 0.25mm per ply.  What you will do is remove the surface resin ( the glossy bit ) which will leave it Matt.  Hence the shoe polish, if

you have removed the surface couple o thou,  shoe polish should still work .   Unless of course you're under 45 in which case you have probably never heard of

shoe polish .....  [rofl] [rofl] [rofl]

NB this does of course pre-suppose your Cans arn't cover in carbon "effect"  fablon !!!!  [rofl]

Didn't realise you could " flat " off the surface resin and stand ANY chance of it looking any good afterwards  :dontknow:

Being a complete DIY " nobber " I think I would leave it well alone ( or buy a different one  [whistle] )
Taking it back to the old skool !

Kwakaholic


Fuk me would I lie to a fellow kawak man ..... might try a bit of kiwi black on the back where it cant be seen to see if it helps out any

PS : CFC ( Carbon Fibre Composite ) @ 60 % v'f  is around  1.9grms /cm .... I think titanium's about 9 in'it    . . ..  [whistle]
Biking's no more dangerous than a loaded gun.... are ya " F eeling Lucky ? "
...... them thats never tried it don't know what there missin'

Chrisblack10r

Quote from: Kwakaholic on June 30, 2007, 11:46:42 AM

Fuk me would I lie to a fellow kawak man ..... might try a bit of kiwi black on the back where it cant be seen to see if it helps out any

PS : CFC ( Carbon Fibre Composite ) @ 60 % v'f  is around  1.9grms /cm .... I think titanium's about 9 in'it    . . ..  [whistle]

no mate, i dont think you would lie to me, nut like anything you need to make sure it looks ok for me before i go boot polishing it  [rofl]


Volkswagen Master Technician with an 08 zx10r with 181.4 BHP at the back wheel hahaha!!!!!