News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

Al-rite from wet and windy yorkshire

Started by ravesracin, December 01, 2015, 04:42:09 PM

Previous topic - Next topic

ravesracin

Hello everyone, just found the forum as i was looking for info on the web about wheels for a 06 i think gen 2 sure someone will put me right lol. Bought the bike for me and my lad to ride to save his 600 race bike engine. Cant wait for the winter to be over to get out and try it out.

GRNINJA

welcome in to the forum buddy

ebay is probably your best bet to find the wheels , not many selling now

maybe try here to http://www.motoforum.net/
Ride it like you stole it - or at least try

ravesracin

Cheers,been looking on both what other years fit the 06?

GRNINJA

Think you would need a spacer made from the other years hammy on here is best person to ask
Ride it like you stole it - or at least try

HammyUK

Theres a thread somewhere about it and several lengthy posts!  :tongue3:

Recap:

Gen 1 04/05
Front - ONLY 04/05 unless you want to start machining wheels and changing bearings.
A few will tell you its ok as Kawasaki have the same part number for front wheels, etc. Kawasaki have the same part number for the same parts on ALL their bikes - the first part anyway. There are another 6-8 numbers that then designate WHICH exact bike that part is for.

Rear - ALL models right up to 2015.

Gen 2 06/07 (underseat exhaust)
Front - ALL models up to 2015 EXCEPT 04/05 unless you want to go looking for bearings to match the smaller diameter front spindle. Has been done but not easy to source and usually only ceramic.

Rear - ALL models EXCEPT 11-15 - offset is different due to new swingarm design. Has been done but makes wheel changes difficult on the newer model.

Gen 3 08-10
Front - ALL models except 04/05 (see above)

Rear - ALL models 04-11 except 11-15 (see above)

Gen 4 11-15
Front ALL models except 04-05

Rear - only 11-15 due to offset, etc, Although it has been done in the States on 10R.net for cosmetic reasons, its a fuck load of works and very, very expensive.
I don't need 200BHP.........................ask the guys behind me!

GRNINJA

Ride it like you stole it - or at least try

davemfox

1993 YZF 750 SP (in PINK/white as a homage to AndyJ)

Davis Patch