News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

HyperPro RSC steering damper - Now sold

Started by ZedThou, December 02, 2013, 12:31:13 PM

Previous topic - Next topic

ZedThou

Does anyone want to upgrade their Ohlins steering damper.  I bought this to do just that and although it fits perfectly and works great, it won't fit with my new bars.  I have fitted a new top yoke and fat bar conversion to my bike and the damper has to be relocated and it just won't fit.  So offering it here before I put it on ebay.  See the photo of it fitted below.  Much better than the standard unit and is also the RSC version, so you can run a lower setting and it stiffens up when needed.  Looking for £125 posted.  That is half the price being charged by Moorespeed (see link). There is a small mark on the body of the damper but nothing bad.  It is boxed with the mounting bracket. 
http://www.moorespeedracing.co.uk/kawasaki-hyper-pro-steering-dampers/zx10r-zx6r-hyperpro-csc-steering-damper.html







Top Cat

do you know if this fits a 2011 ?
if it does I'll take it

ZedThou

#2
Quote from: Top Cat on December 02, 2013, 08:40:11 PM
do you know if this fits a 2011 ?
if it does I'll take it

I have not really looked at the 2011-2013 model, but I found this picture and the OEM damper looks exactly the same as the 2008-2010 damper, so I would say yes it will fit.  On the 2010 model, I found it sat a bit high on the centre bracket with the white plastic spacer in place, but once I took that off, it was spot on.  Like I said there is a bit of a scuff on the body so please be aware of this.  The damper works perfectly and this is the only mark on it, I am just trying to be honest, but this damper sells for £280 with the bracket.  I am happy to send you more photos if you want.

http://www.seastarsuperbikes.co.uk/Kawasaki%202011/ZX10R%202011/zx10r_cockpit.jpg

If you are wondering how to remove those tamper proof bolts, so did I.  I bought a special tamper proof bit which was shit and didn't work, so I resorted to plan B, mole grips, and just threw the bolts away once they were out. They came out easy enough with mole grips. The damper comes with the replacement bolts which can be seen in my photo.

Top Cat

can you check some measurements for me please, can you measure between the mount points with the damper central please
thanks
Dave

ZedThou

Damper body measures 128mm which is shorter than the Ohlins body.  I put equal amount of rod at each end of the body, and with mount central it measures 125mm hole centre to hole centre.  You can see in my photo that the amount of rod at each end of the body is roughly equal with it fitted.  As the bracket can be moved along the body, it does mean that there is a lot of flexibility if the mount point needs to be adjusted, but I am sure the mount points are the same between the 2008-2010 and the 2011-2013 models, as the Ohlins damper is the same.

Top Cat


Top Cat

alan I've checked and I think its too short hole to hole appears to be around 165mm on mine, so sounds like its a bit different
thanks anyway
Dave

ZedThou