News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

Akrapovic Titanuim Carbon Can 2011 + Link Pipe

Started by robbosliding, April 10, 2013, 09:20:45 PM

Previous topic - Next topic

robbosliding

I have a virtually brand new titanium and carbon tipped exhaust with the decat link pipe - I have done less than 150 miles with this can fitted to my bike, it is simply too noisey for the road so I have replaced it with an Arrow 98db can. The can is completely unmarked, has every fitting with it, the OE baffle is complete and the carbon shield to be fitted with the cat is brand new and never fitted. I may well have the original box (I'm sure I have) - all parts of this would pass as brand new. The can retails at £589 and the link pipe at £114- with that in mind I would be looking for £475 to part with it. Its a steal.

mc101

Is it the evo can ?  Can you check the internal diameter where the link pipe goes on the can (that's the give away) ...


robbosliding

Ok.....I have measured the inside edge to edge of the inside of the can that slips over the link pipe. As best I can read it is 41.5mm

I didn't know they did different versions of this - it started life on the cat and then I bought the link pipe (included with sale at £475). It is absolutey mint as new. Let me know if you need anymore info, I have pictures I can email, pm your email address if you want them.

mc101

Quote from: robbosliding on April 12, 2013, 04:01:52 PM
Ok.....I have measured the inside edge to edge of the inside of the can that slips over the link pipe. As best I can read it is 41.5mm

I didn't know they did different versions of this - it started life on the cat and then I bought the link pipe (included with sale at £475). It is absolutey mint as new. Let me know if you need anymore info, I have pictures I can email, pm your email address if you want them.
Yes theres a road going can and a race (evo) can .... once designed to go with the various link pipes and one exclusively for the race system.  The internal diameter you have will almost certainly be a 42mm can ..  let me check what my tatty evo can is :-)

robbosliding

I take it the akra full system is wider than stock. I have listed it on ebay so the pics are on there now. Worth a punt on ebay as ever.....

MOz

Just out of interest, you mention in the ebay listing that with the baffle in it is 98db.  Is this correct or is it 98db when the e-marked can is attached to the cat on the standard bike?

How loud is it with and without baffle using the de-cat pipe.

I'm trying to sort a deal for an 11 plate 10R but if this can is stupid loud (like the equivalent de-cat shorty was on my S1000RR was) then I'm not that keen.

If a sensible "MOT passing" noise level can be reached baffle fitted then I may well be interested.  Can you advise please Robbo?  Cheers

robbosliding

Ok - with the cat fitted the can produces 98db when fitted with the insert baffle fitted. With link pipe (decatted) without the baffle insert it produces 104db - I have an optional piece of siliencer baffle tube that can extend the insert which only reduces it to 103db. It could be reduced more with some baffle packing if needed say for Donington on a non loud day. The issue with these short cans is they are simply very short and don't kill much noise -the cat does most of that and in the case of your SR1000 the cat does it all, removing the can on one of those changes nothing noise wise, its all in the cat. The can however for MOT purposes does carry an e mark for noise so I doubt you have problems there. I have removed it from my track bike (ie for Donington) and replaced it with an Aluminium Arrow full length can. The ali is thicker than titanium and so kills more sound and the exhaust is longer producing 98db with arrow link pipe. Additionally you should know if you decat the bike with Akrapovic & linkpipe you will need a Power Commander V and the bike setting up on a dyno for best results. My track bike (2011 ZX10R) is now all Arrowed up and complicit with all TDO needs noise wise and my road bike (2011 ZX10R) has a Akrapovic Ti can (same as I am selling) but with cat retained - no set up or PC V required - I suggest your way forward producing 98db and being completely MOT compliant. Suits you Sir.......

MOz

Cheers for that Robbo.  I was hoping that by some miracle you could have a de-cat pipe with baffled shorty and get somewhere sensible noise levels for potential MOTs and not pissing off the boys in blue.

That said, as the ZX10R cat is easily removed (rather than the Panzers that was part of the downpipes and only removable if you cut it off) then maybe a de-cat pipe and baffled can might be acceptable for general road riding with the cat refitted for MOT, producers etc etc

Is the noise of the unbaffled can fitted to the cat much louder than the standard factory fit can, is the tone more "race can" and could you get away with it for day to day road riding?

robbosliding

Yes, I ride my road bike (with cat) and akra pipe without the baffle fitted - it is not offensive tootling about but is much more throaty than the horrible trumpet that is the OE fitment. You won't have any problems with this set up and it sounds lovely and releases a few horses. Its bang on as described and I have the brand new and unused carbon guard that fits with the cat to hide its ugly presence. PM me your email address and I will send you a picture of it on my road bike as described.