News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

New Arm

Started by andicog, April 03, 2010, 10:17:28 PM

Previous topic - Next topic

andicog

So after much grief  with the nitromorse  and a few hours with  some scotchbrite my 08 arm is just about done, just need pennies for a new chain and I can finish it off.  :lol:
Age And Treachery Shall Always Triumph Over Youth And Skill . . . . . . .

roy

good job there mate looks spanking mate  :icon_thumright: have a bhp  :icon_thumright:
green means go so what you waiting for

Andy J

Quote from: roy on April 03, 2010, 11:02:36 PM
good job there mate looks spanking mate  :icon_thumright: have a bhp  :icon_thumright:

:iamwithstupid:  remindsme of thehours spent on a zxr400 when i did similar with frame and arm back in ahem.......... 1990,nice one pal, looks nice  :headbang:

madlad

mmm nice an shineeee  :headbang:
Has anyone seen my marbles?

WAZHALO31

]

jimhas7

WOW  :glasses9:

How much did that set you back or is it all your own work  :icon_thumright:


Dont forget a few pics when you get it on the bike   :headbang:



Work experience : Discoverer of caves behind waterfalls, slayer of Demons, spent a short time (a very short time) as keeper of the Heavenly stables (a very over-rated job if you ask me). Currently bodyguard to the jibbering fool Tripitaka (who doesn't appreciate me at all) and full time Great Sage..

Charlie

That looks great mate. I don't suppose you want to hone your skills further by doing mine ?  :laughing5:
Refugee admin from www.gixerjunkies.com

BAD BOY NINJA

Looks real good mate. I was thinking of doing the same but wasn't sure if you can buy them like that or if it's got to be a DIY. Let us know how you did your's and how long it took.  :icon_thumright:

andicog

It took around 8 hours from start to finish, I used little over half a litre of Nitromorse, worst part is the sand cast bit, found a suede brush (soft brass or copper bristles) works well with the Nitromorse ,the extruded parts are really easy as paint just curls up and falls off if you leave the stripper to do its stuff for 20 mins,  arm had a  few factory sanding marks so used 320 wet and dry with washing up liquid followed by a red scotchbrite, It could also be polished or left in the 320 finish for a more industrial look,  not sure how long the finish will last in bad weather as obviously its just bare alloy, although  the sandcast parts came up ok I have masked them out  carefully around the welds and primed and painted them  with fine silver basecoat , it still looks like bare alloy but is at least protected from the weather.   may have it powdered next winter if it starts to fur up, Aerotech do a great powder that looks similar to bare alloy .and recon the frame and arm would look good whilst still being weather proof.  :lol:

     http://www.aerocoat.net/Aeromaxtm.htm
Age And Treachery Shall Always Triumph Over Youth And Skill . . . . . . .

big_gaz

Crackin' reckon it will make it look very different.  Have a gee gee for your effort.
Big_Gaz 6'1'' still on a 'kin diet!!

andicog

Thanks for + comments  :icon_thumright:
Age And Treachery Shall Always Triumph Over Youth And Skill . . . . . . .

drewk8

good job  :icon_thumleft:

next time use wax on sand paper. it stops it burning the Aluminium and use water with the scotchbrite. . As for weather proof.. give it a coat of car wax now and then.Will help to protect it..

p.s. you want a job? thats better than some of my blokes work..!

lol

andicog

Quote from: drewk8 on April 07, 2010, 07:10:16 AM
good job  :icon_thumleft:

next time use wax on sand paper. it stops it burning the Aluminium and use water with the scotchbrite. . As for weather proof.. give it a coat of car wax now and then.Will help to protect it..

p.s. you want a job? thats better than some of my blokes work..!

lol

Used water and washing up liquid (fairy liquid to keep my hands as soft as my face. . . ),  never tried wax and sand paper, will give that a go next time, I use Scotchbrites wet, but when I used to paint cars we were told by 3m never to use water with them as it removed their coating ??? only use panel wipe ??  Do I want a job ? sure do !  Anyone out there who wants a VW/Audi trained painter (16yrs exp)  who's been oddly driving a bus for a few years please feel free to contact me ! :icon_thumright:  Did this in my shed , 


Age And Treachery Shall Always Triumph Over Youth And Skill . . . . . . .

drewk8

lol.. nice work.. Im a Polisher by trade so mess with stuff like that everyday.. got a set of B king wheels to do tmrw.. ill get a before , during and after photos up for ya :icon_thumleft:

andicog

Sounds good, its all about making scratches smaller and smaller !  :icon_thumright:
Age And Treachery Shall Always Triumph Over Youth And Skill . . . . . . .