News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

indicators

Started by NinjaPaul, March 30, 2009, 07:52:19 PM

Previous topic - Next topic

NinjaPaul

Well after several days of head scratching trying to figure how to secure them in place, this is my bike now with modified front indicators.  :icon_thumright:


brian27

job well done mate :icon_thumright: would be better if they were clear tho only my opinion mind

ZX10RJohn

Nice job mate......... :icon_thumleft:..............wot crash bungs are they, and do they need drilling?  I bought R&G but have to change radiator expansion tank and drill holes.... :dontknow:

NinjaPaul

Quote from: ZX10RJohn on March 30, 2009, 08:23:01 PM
Nice job mate......... :icon_thumleft:..............wot crash bungs are they, and do they need drilling?  I bought R&G but have to change radiator expansion tank and drill holes.... :dontknow:

The crash bungs are GSG Moto ones and no, they dont require the fairings to be drilled. They have a nice solid alloy bracket to mount onto. I had GSG's on my 05 bike as well and cant rate them highly enough.  :icon_thumright:

They do them either with plain alloy brackets or black anodised for a bit extra cost. Not the cheapest bungs out there but worth every penny. B-)

ZX10RJohn

Cheers mate...........looks like I'll be buyin me a set of those.......... :icon_thumleft:..............and stickin the R&G's on to ebay

J-train

Man that looks good, good job on the retrofit, should have came that way!
04 Candy Plasma Blue
06 Kawi Green

Ant

Quote from: J-train on March 31, 2009, 04:35:40 AM
Man that looks good, good job on the retrofit, should have came that way!

Agreed, looks like the way it should have been

Andy J


roy

now why didn't Kawasaki do that it looks so much better  :icon_thumright:       well dun look grate
green means go so what you waiting for

wing46


Panzer Division Marcin

Cobra88

Hi Paul

Any chance you could knock up a how-to guide for others wanting to do this mod ?

Looks much better mate :icon_thumright:

Regards
Rick

NinjaPaul

Difficult to say in detail without writing war and peace really but in principal the modification is not that difficult.

I used the front indicators from the 04/05 ZX10R but the mod would be more easily done with 06/07's due to the orientation of the mounting points. The hardest part is cutting the wedge out of the fairing, to get both sides symetrical and not to remove too much plastic so the indicators fit snugly with no big gaps. The key here is to remove a small amount of plastic at a time, then test fit, then remove some more, then test fit, etc etc. Once one side is done the second side is a bit easier as you can use the first as a guide.

Once the wedges have been cut out I need to make some mounting points for the new indicators to screw to. This was simply done by glueing small blocks of styrene plastic (the type used in model aeroplanes) in the appropriate areas inside the fairing. The glue was something called polyweld, available on ebay and works well on abs plastic as it melts the surface allowing other styrene or abs plastics to be 'fused' to it.

The final stage was to extend the wires from the indicators to reach the shroud under the screen where the connectors are located. This was just a case of soldering longer pieces of wire onto the existing ones and then re-attaching the block connectors to the end. Dont forget to insulate the soldered areas afterwards though.

Andy J

cheers fella ,  maybe put some pics up too, that'd be great  :icon_thumright:

NinjaPaul

yeah, will do some next time I have the fairings off  :icon_thumleft:

Andy J