News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

TIME FOR MORE MODS

Started by silky22, August 09, 2008, 10:27:43 AM

Previous topic - Next topic

truescot

Quote from: r1ninja on August 09, 2008, 11:39:57 AM
Quote from: mrwippy on August 09, 2008, 11:36:53 AM
surely de-buring all the bits out of the ram air ducts would help with airflow tooooooooooo
Dunno mate. The airbox doesn't look like a particularly good design. When you look at the dirt pattern on a filter it just seems to be using the ends.

remember the airbox is under a lot of pressure, so chances are the dust/dirt gathers at the edges more readily but the air will still be flowing thru the rest of the filter

r1ninja

Quote from: truescot on August 09, 2008, 05:18:32 PM
Quote from: r1ninja on August 09, 2008, 11:39:57 AM
Quote from: mrwippy on August 09, 2008, 11:36:53 AM
surely de-buring all the bits out of the ram air ducts would help with airflow tooooooooooo
Dunno mate. The airbox doesn't look like a particularly good design. When you look at the dirt pattern on a filter it just seems to be using the ends.

remember the airbox is under a lot of pressure, so chances are the dust/dirt gathers at the edges more readily but the air will still be flowing thru the rest of the filter
No it isn't , Ram air pressures aren't very high at all.

www.r1forum.co.uk

No-one needs more than seven fifty

truescot

ok, sorry i didnt actually mean to say a lot of pressure, just pressure, anywho the effect should be the same, you will get a cyclone effect pushing the dirt to the outside of the airbox. This is of course my uneducated oppinion and could be totally wrong but it makes sense inside my head

NinjaPaul

#18
The dirt will be more to the edges of the filter because this is where it comes in through the chassis, ie first point of contact between filter and dirt.

The 08 air filters will no doubt get dirty in the middle because the ram air routes through the centre of the chassis directly behind the headstock.

ZX10R-RACER

i fitted these modded stacks to my 636 b1h made it ok for track use moved all the power to the top of the rev range but lost loads of the low down power, they soon came back out.