News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

Zx10r calipers

Started by GRNINJA, January 10, 2016, 04:06:07 PM

Previous topic - Next topic

GRNINJA

Do the 08 calipers fit straight in the 04 bike
Ride it like you stole it - or at least try

michael4012


GRNINJA

That's slightly confusing that thread

So if I updated calipers I need the 08 discs as well and that's it no spacers etc ?
Ride it like you stole it - or at least try

michael4012

Yes the Gen3 calipers bolt directly onto the Gen1 forks but they sit 5mm higher (out) than the gen1 stock calipers because the gen1 stock discs are 300mm the gen3 stock discs are 310 so you either fit 310mm discs which also increases braking, or it is possible to get the faces of the Gen3 calipers machined down by the 5mm  :icon_thumright:

r1flyguy

I have both disks and calipers off my 09 available if your after some  :icon_thumleft:

GRNINJA

Ride it like you stole it - or at least try

r1flyguy

Replied to your pm

Let me know you received it ok

Any questions please ask  :icon_thumright:

Si-10R

I have 3rd gen calipers and discs on my 10R. For correct fitment you need 4.5mm taken off the caliper. I had mine done for a perfect fit.

GRNINJA

Quote from: Si-10R on January 11, 2016, 03:39:02 PM
I have 3rd gen calipers and discs on my 10R. For correct fitment you need 4.5mm taken off the caliper. I had mine done for a perfect fit.

Thanks bud
Ride it like you stole it - or at least try

michael4012

Iv got the ZZR14 callipers on my Gen3, they are an improvement on the Gen3 callipers that are widely known to be better than the Gen1 callipers. These are a direct bolt on too yours and look better than Tokico callipers. http://www.ebay.co.uk/itm/Kawasaki-ZZR1400-06-12-Front-NISSIN-Calipers-Bolts-/172062471297?hash=item280fb8f481:g:56AAAOSwYIhWl99L these are dirty looking but it looks like they will clean up & they have pads, pins & rattle plates, ideally new pads would be best but for a Ã,£100 there a good upgrade as is you can splash the cash on new pads at a later date :icon_thumright:

GRNINJA

Quote from: michael4012 on January 16, 2016, 07:59:42 AM
Iv got the ZZR14 callipers on my Gen3, they are an improvement on the Gen3 callipers that are widely known to be better than the Gen1 callipers. These are a direct bolt on too yours and look better than Tokico callipers. http://www.ebay.co.uk/itm/Kawasaki-ZZR1400-06-12-Front-NISSIN-Calipers-Bolts-/172062471297?hash=item280fb8f481:g:56AAAOSwYIhWl99L these are dirty looking but it looks like they will clean up & they have pads, pins & rattle plates, ideally new pads would be best but for a Ã,£100 there a good upgrade as is you can splash the cash on new pads at a later date :icon_thumright:

Cheers buddy  :headbang:
Ride it like you stole it - or at least try

drewwilks

zzr1400 nissin calipers fit straight on my 07 and the pads from the old calipers need a meeting with a grinder to fit but work good
zx10r 2015 track bike
zx10r 2018 road bike

michael4012

Quote from: drewwilks on February 11, 2017, 01:44:41 PM
zzr1400 nissin calipers fit straight on my 07 and the pads from the old calipers need a meeting with a grinder to fit but work good
That's interesting just for future reference do you have any pictures of where you removed material ?

NinjaPaul

The Tokico ZX10R pads have large castellations on the top corners whereas the Nissin pads have much smaller 'bumps' on the corners.

michael4012

The ZZR14 nissen calipers Iv fitted have 4 pads per caliper not 2. I'm confused.