News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

Bars Swap 08 ZX10R

Started by joe_crow, October 08, 2012, 07:28:27 PM

Previous topic - Next topic

joe_crow

As anyone who’s read my for sale ad knows I had decided to sell the zx10r due to the pain it was causing me in my wrist (old injury that flares up from time to time)
As no-one wanted to buy it I set out to improve it to suit my needs. After contacting several people who’d bought the Chinese adjustable clip ons on ebay and getting good reviews I bought a set.
http://www.ebay.co.uk/itm/Adjustable-CNC-Clip-Handlebar-50mm-Black-HD5-/370607622766
To cut a long story short they are pretty poor. To use them I'd need a longer brake hose for starters and they don't have the facility for bar end weights. The bars are less than 22mm in diameter (21.68mm) so the levers would need shimming to get them to tighten up and basically I didn’t trust them at all so after putting that down to experience I decided to go the bars flip way.
I removed the Steering damper first taking care not to drop the spacers. The bar end weights were removed next  then the top yoke and bars. Finally  the levers, switch gear and throttle assembly were removed. The left hand bar could then have the grip removed using hairspray as a lubricant.
I then fitted the left bar to the right hand side and vice versa I loosely assembled everything to see where the new holes needed to be drilled in the bars.
After marking the positions of the new holes the bars were removed for drilling. A 5mm hole was needed for the throttle assembly, and one for each set of switch gear.
The Bracket for the brake fluid reservoir needs some adjustment to allow it to fit on the bar clamp as it did with the bars in their original position but nothing major just a few tweaks with pliers.
The bike was then reassembled and everything tightened up using loctite thread lock where there had been evidence of it being previously used.





Apologies for the crap photography, my camera battery is knackered so I had to be quick  :emb:

Si-10R

Looking forward to a ride report on how it feels. Thinking of doing this on my tl1000

joe_crow

Yep me too. watch it pi55 it down tomorrow

Jak

Nice work  :icon_thumleft:

Did the LH bar being shorter cause any  problems with locating the switchgear and throttle assembly without pushing the brake assembly too close to the forks ?

Did you measure for the holes from the bar end or the clamp?

I have been thinking of this myself  :-S

joe_crow

Quote from: Jak on October 08, 2012, 08:15:52 PM
Nice work  :icon_thumleft:

Did the LH bar being shorter cause any  problems with locating the switchgear and throttle assembly without pushing the brake assembly too close to the forks ?

Did you measure for the holes from the bar end or the clamp?

I have been thinking of this myself  :-S

No probs with the bars at all and to be honest I didn't measure I just fitted them loosely and marked their position.
If you do go ahead with it I'd suggest going for a quick ride with the switch gear holes not drilled to make sure your happy with the position of the switches. for some reason they don't feel quite as natural once your hands are in a different position particularly the right hand side one. I might need to move that one again  :emb:

The test ride today went very well in fact they feel much more natural than before and make fast direction changes easier. Its all down what's comfy for each person though. They work for me and that's the main thing.
Sure is noisy though after I've been riding my other bike

next things on the shopping list power commander and a double bubble screen cos your head is up higher with the bars like this.

Scottyboy

Shit hot write up buddy, thats really opened up the options  :hello2:  :icon_thumright:
Power Commander V5
Dyno Jet Quick Shift
Full Titanium Akrapovic
BMC Air Filter
Akrapovic Carbon Fibre Everywhere
Brembo Master Cylinder
Dyno'd 182BHP @ Back Wheel
The Grim Reaper In Black

TEN-r

Well done with this write up. Very informative. I think it's the 1 main issue with this model.

Top drawer mate ;)
Craig
zx-10r e8f