News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

Vinyl Wrapping etc.

Started by slapknacker, November 13, 2011, 08:59:58 PM

Previous topic - Next topic

slapknacker

Has any one tried vinyl wrapping or putting vinyl decals / stickers or their bikes.
I'm thinking of making up some number board graphics to fit to my zx6r.
Any pointers from those who have tried it / done it much appreciated.
P.B. magazine has done it recently.

Got the bike bug again, had a bit of a lay off the last 4mths for one reason or another :roll:

Cheers Daz.
i'm too thick to make a banner, have tried at the banner maker site, can make one but cant get it uploaded. shyt shyt shty shyt.............
pissed of now!

Shongololo


Brotherhood of the Elite. It's not who you are it's what you ride.
http://fullthrottledecals.co.uk

HammyUK

Either talk to Shongololo or PSG.
I don't need 200BHP.........................ask the guys behind me!

chalkies decals

check out www.chalkiesdecals.co.uk for supply and fitting of decals and vinyl wrapping  :)
Check my website for custom decals and full race livery fittings... www.chalkiesdecals.co.uk

slapknacker

Quote from: Shongololo on November 13, 2011, 09:05:47 PM
Where you based?

Hi James,

I'm over in west side of Birmingham mate. If i recal you are over Corby way so a bit of a journey.

I have got some vinyl sheet of ebay and i am goin to cut out the shapes i need.
just wanted some advice on fitting, eg do you put soapy water on the panel so you can
position the piece without it sticking? then do you warm it up with hair dryer to dry out the water and make it stick?

Thanks mate,

Daz.
i'm too thick to make a banner, have tried at the banner maker site, can make one but cant get it uploaded. shyt shyt shty shyt.............
pissed of now!

Shongololo

Quote from: slapknacker on November 20, 2011, 02:38:19 PM
Quote from: Shongololo on November 13, 2011, 09:05:47 PM
Where you based?

Hi James,

I'm over in west side of Birmingham mate. If i recal you are over Corby way so a bit of a journey.

I have got some vinyl sheet of ebay and i am goin to cut out the shapes i need.
just wanted some advice on fitting, eg do you put soapy water on the panel so you can
position the piece without it sticking? then do you warm it up with hair dryer to dry out the water and make it stick?

Thanks mate,

Daz.
use a spray bottle with a drop of washing up liguid in it. That will make thh decal float then squeeze the water out using the wifes M&S card or some similiar clothing store credit card. Just make sure it hasn't got sharp edges my wifes are too poor to be sharp.

http://fullthrottledecals.co.uk/page10.html got instructions here.

a hair dryer can cause the vinyl to stretch best to let it dry over night, but you should be able to squeeze most out.start from teh middle and scrape towards teh edge

Brotherhood of the Elite. It's not who you are it's what you ride.
http://fullthrottledecals.co.uk

slapknacker

Nice one, cheers mate.

Have a BHP for that...! :icon_thumleft:
i'm too thick to make a banner, have tried at the banner maker site, can make one but cant get it uploaded. shyt shyt shty shyt.............
pissed of now!