News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

California Superbike School- Experience, Findings, Result.

Started by robbosliding, October 08, 2011, 12:55:38 PM

Previous topic - Next topic

robbosliding

I went to the CSS in August. Its been a bit of a roller coaster trip and its only now I can report back on it. My reasons for going are the following. I am a biker of 20 years road experience, I've been doing trackdays for 16 years, I guess around 50 trackdays in all. I occasionally I have dipped my toe into the fast group, invariably I am the slowest in the group. I consider myself to be an intermediate rider though that can vary upon the ability on those there on the day . I run around Cadwell in around two minutes, regularly dipping under to 1.57/56 I was very poor at quick turning so suffered at chicanes, hairpins... I was struggling to get my bike turning on a decent line at Coppice though my style allowed me to be quick around the top end of the circuit until Gooseneck. I could not get any quicker for love nor money- I was dog slow from the chicane to exiting Barn. On the back of this I booked level 1 CSS in August, it cost £430 using my own bike- the only way I would do this- otherwise I percieve you spend time getting used to an unfamiliar bike.
The day itself was very well organised and the structure is clearly a proven format. However......I think it was one of the most frustrating days of my adult life. I understood the theory but "doing" it was another matter. In short I came away tearing my hair out. I arrived thinking I could ride a bike and left completely out to sea. The reason was simple. I have been riding a bike wrong for 20 years. Incredible to comprehend but true. And no so called "trackday instructor" has pointed out my fundamental errors which were basic. My body position was too far forward, my use of steering was wrong and I had misunderstood counter steering - what it was and how to use it.
I am now fault spotting other riders, widely in the inters and novice group making all the same mistakes. What I was doing was sitting fully forward against the tank. To turn I would set my speed and then hang off the inside bar- I was hanging DOWN on the bar - as opposed to pushing the inside bar - and rotating my hips around the tank to provide enough weight to balance the bike around the corner which in turn pulled my outside knee away from the tank- I could do long fast corners really quick like this, knee and pegs down no problem. The problem was changing line or direction change at the next bend- I was a passenger on my own bike and this explains why I was going so wide and getting passed on the inside. Blasting down the straights I had very little ability to change line with any meaning as I was hanging on the bars so tightly preventing any steering input. It was all a bit of a mess and I was putting a lot of physical effort into doing it. I was fighting the bike. And in the wet it was scary. What I was doing in effect was hanging on the front all the way around the corner so I would feel every twitch and roll the throttle closed when it felt vague which would take me even wider. Its a miracle I ever did under 2 minutes around Cadwell let alone do it with out crashing of my own valition. Many of the errors I was making are quantified by the CSS teaching system as errors known as unwanted "survival reactions" which all affect your riding in a negative fashion.
I had immense difficulty on the day with sitting further back on my seat to balance the weight of the bike properly. It felt alien and was prevented by one small detail. I was constantly sitting further forward to hook my gear lever- it needed adjusting up to facilitate this new rearward seating position. I understood all the theory but as much as I tried on the day changing 20 years of habit was very uphill. What I did not feel on the day was correct steering input which again didn't help. On the day I understood counter steering to be a nudge forward on the bar to instigate the turn but then reverted to hanging off the bar for the remainder of the turn which prevented two stepping properly (line through entry, apex and exit) so I felt like a failure at the end of the day and immensely, immensely frustrated. So much on the day driving home thoughts of sacking biking all together were in my mind. I'm a bit of a perfectionist (which is a hinderance not a quality!), I hate failing at something.
A week later I went to Cadwell to watch the BSB Superbike round there. I stood at the hairpin and watched the pro's. I noticed something there all to a man did after braking- they all adjusted their seating position to the rear and their outside foot was instep on the peg- mine has aways been the ball of my foot- this has been reducing my outside knee contacting the tank reducing my control and stability. Whilst they were getting their knee down they were not hanging down and forward, they were sitting rearward and just opening their leg as a feeler. And their body position was the classic position of riders who have passed me at speed into bends........
After the weekend I went out on my road bike ('09 ZX6R) and persisted in this rearward seating position. I realised at this time it was my gear lever that was inhibiting my rearward position. Spanners out and this was sorted. It was then and only then that I began to start to feel the ability to "push" the inside bar to turn (don't forget before I was turning right to go right and compensating with hang off to weight the bike around the corner (body steering works only to a very minor degree)). This is where the penny really began to drop. The concept of pushing the bar (forward and not down) left to go right was felt. It wasn't second nature at first (20 years of doing something else made sure of that!!!) but with practice it has come. I went to Cadwell on Monday and it fell into place. Never before had I really understood "pushing" the front end- I thought it meant simply running the tyre to its natural point of grip. No, you can push the inside bar hard, really hard to tighten a turn and get on the gas quicker and harder than I have ever experienced doing. And I'm still finding the benefits of riding as taught. I went back to Cadwell on Thursday. It has given me a completely new lease to life on a trackday, consistently doing 1.54 which isn't a racers time by a long way but a significant improvement and I can feel I can improve on this by some way. Sub 1.50 will be the target next season.
So my rating of the California Superbike School?  I was probably the hardest most testing student on the day because of how ingrained my bad habits were - which you initially revert to when things go wrong. It has been hard work to break those habits but the reward has been worth it. On Mondays open pit lane I was on (predominantly racers, fast group and a few inters) I was passing as many as were coming past. That wasn't happening before. I wish I'd gone to the California Super Bike School years ago, and that was only level one. I have heard others say level one isn't that exciting. I will go back for level two next year but my guess is level one will have been the fundamentally most important level I will ever do.
From tearing my hair out on the day (the barrier was my own previous experiences), I would recommend the California Superbike School to any rider of any experience as there will be something there to bring any rider on. I would especially recommend a new rider to do the school to prevent the mis spent years I have suffered. It may seem expensive, £430 is not to be sniffed at but the benefit it has brought me is priceless. And as an aside, many thanks to "Spidey" aka Andy Peck my one to one intructor for his patience and persistence. As a testament to their commitment to their students he has continued to coach me via email with advice and responded to questions. The California Superbike School is a very, very worthwhile package. Eventually....Thanks Andy :hello2:

chaospunx

great review mate glad you got something out of it hopefully see you on track somewhere next year
p.s very intresting about getting further back on the bike its something i have noticed others do but finding it difficult to do myself have even been thinking of putting a couple of layers of seat foam on the tank to physically stop me getting that close to it

Pewters

Excellent read pal.....I noticed myself that with your instep on the outside peg makes a huge difference (and help) to your body position. CCS is something I intend to do when funds allow.

jeffoboyo1

great read mate  :icon_thumleft:, so with the outside foot do you mean that the front of your boot (toes) should be on the peg.!!

zx10manic

Quote from: jeffoboyo1 on October 08, 2011, 02:53:08 PM
great read mate  :icon_thumleft:, so with the outside foot do you mean that the front of your boot (toes) should be on the peg.!!

No, just before your toes you have the 'ball' of your foot, then further back is your instep/arch of  your foot, just before your heel.

jeffoboyo1

aa rite so the bit behind your big toe, thanks zx10manic...

robbosliding

Jeffoboyo1- I will clarify what I mean re foot position. For me to ensure the correct body position during cornering my OUTSIDE foot must have the instep on the peg. That is the cut out after your heel in the arch of your foot. This foot must be flush with the machine and toes NOT pointing out- this may seem very trivial but if the toes are beginning to point out it indicates to me that my body position may be twisting around the tank and in the wrong position. Having my foot flush on the machine allows me to clamp onto the tank (max use of stomp grip) and prevents me being to tight on the bars which inhibits steering. This correct position also allows me to clamp my knees tightly around the tank during braking, again stopping me being too tight on the bars and allowing the front suspention to work properly. This in turn stops me, my body weight over loading the front by placing my weight rewards and allows the bike to balance itself approx 60-70% on the rear under throttle to allow the front steer accurately and quickly by pushing on the inside bar. It gives me good purchase on the peg, the inside foot is toes on the peg to give clearance.
Chaospunx- The sensation and new control this has given me is significant. On the odd occasion I slip into bad habits I can immediately feel the disadvantage and can then fault find and correct it. If you think back to Waddington, and maybe you saw this at Rockingham, I was f**king awful turning my bike out of the tighter corners- think exiting the loop onto the piano keys and exiting back on the long straight. My old style allowed me to carry big speed into fast long sweepers eg Charlies, Chris Curve, Gerrards, the bottom of the runway as I could set up, hang off and then gas on all the way through it. I never feared losing the rear, I now realise I was stressing the front not the rear, which as CSS has taught me, is not in harmony with the bike design and was wrong. If I felt the front twitching or searching I thought it wrong and would grip bars the harder to resist this which was actually stressing the front even more. Consequently I constantly found exiting tighter corners that riders (you included!!!) could get their bikes turned quicker and back on the power and I was getting whupped. CSS has taught me to turn quicker (properly infact, in line with intended bike design) by sitting back to balance the bike in a firm secure and controlling position to enable me to use the front to steer the direction of the bike without hanging off- I can now steer by pushing the inside bar forward in a horizontal fashion to turn tighter and for corners like Coppice I can push harder to "select" a tighter line where as before I was a drifting passenger going around the corner, generally wide. The sensation of sitting back and pushing the inside bar is almost as if I am pushing the bike away from me, like I'm trying to wash it out. I have had to learn a new confidence in the front end and I have to say I am looking forward to trying this in the rain. This why I say I now understand "pushing the front end". The result of pushing hard and quick on the bars is I am changing direction much more quickly, where I was struggling at chicanes and hairpins, thats a problem of the past. I can now "quick flick" the bike more confidently. The hairpin is probably the best example, I can do quicker in, turn quicker and be back on the gas where before I was rolling in, hanging off (occasionally destabilising myself with too much hang, off not enough speed) and only then getting back on the gas. I've gone from being swallowed in some sections of circuit by other riders to holding my own quite nicely and am now making passes that I couldn't pull off before. As an aside my braking is also improving as I'm not overloading the front. It hasn't been a miracle, I have simply been shown how to ride properly where I wasn't before. What is completely baffling is that  for so long I was riding so hard completely wrong and didn't know it other than to say I knew the faster guys were doing something better/differently as I could not hold it with them on tighter bends. The CSS day isn't cheap but was it worth 4 trackdays at Cadwell for the price of the day? You bet, I am turning quicker, faster out and negotiating sections of track that I'd got into the habit of coasting around. Like I said in my original post, it didn't happen on the day but they gave me the knowledge to work on it. With some application I've got it with tremendous results. 6 seconds consistently off a lap time. Golden.

zx10manic


robbosliding

Ha ha, yep, instep for the outside foot, knee against the tank, ball of foot for the inside leg, knee feeling for the ground. Nice one. Good to keep afoot of things...... :downtown:

jeffoboyo1

ok thanks guys, will try this , i havent been riding that long so should be able to get used to that way,  :headbang:

zx10manic


jimhas7

Great write up, wished Id been able to read it before last Monday, where I did Silverstone and found I was holding my own in the faster sections with some quicker riders but they where just blowing me away in the tighter turns. They where able to carry more corner speed than me and I was searching for an answer but couldnt work out what to change. I seemed to be ok on entry and similar on the brakes (Sometimes...) but now having read your write up I can relate to being too close to the tank in these tighter turns and also not having the correct peg position on my outer foot as you have described. I actually found myself leaning on the tank with my chest to stop me putting weight on the bars a couple of times which just added to my feeling that I am in need of tuition of some sort.  :emb:

I will be trying to apply this next time I go out  :icon_thumright:
Have a bhp  :icon_thumright:
Work experience : Discoverer of caves behind waterfalls, slayer of Demons, spent a short time (a very short time) as keeper of the Heavenly stables (a very over-rated job if you ask me). Currently bodyguard to the jibbering fool Tripitaka (who doesn't appreciate me at all) and full time Great Sage..

robbosliding

Ok, I am no expert and having ony just started stepping in the right direction I don't want to appear to be offering advice to all and sundrie. But in the case for Jimhas7 would politely offer the following;
If you are having to rest your chest on the tank to relieve your wrists you are placing too much weight on the bars and therefore your body position is likely to be wrong. I was taught to have enough space to fit a fist between the tank and my groin. The position of your feet is a good indicator of what your legs are doing and whether they are doing it right. The "locked on" thing is your outer leg clamping to the bike to prevent you having to hold onto the handle bars- if you hang onto them and use them to pull yourself over the bike to change direction you will induce wiggles and destabilise the bike. You should be locked on with both knees (infact knees through to feet/inner leg) to brake and accelerate. Infact imagine your bike facing downwards on a 45 degree incline with no handle bars- you would have to clamp on with your knees, that is what you need to achieve and that will maintain your rearward desired seating position.  Now, as I understand it, if your weight is going down through your bars you will run wide. This is because as you lean in you will increase weight through the inside bar which creates a counter steering action and will cause the bike to run wide. The correct position is weight back, outer leg locked on and forearms horizontal to the ground "pushing" the inside bar forward ie pushing the left bar forward to turn left. As the front is pushed left it falls onto the inner left side of the tyre- you are using the profile to turn, not turning the bars left to go left if that makes sense. It has blown my mind getting this concept but now I've got it it has revolutionalised how I ride. I hope this help you Jim.

jimhas7

Quote from: robbosliding on October 08, 2011, 09:16:03 PM
Ok, I am no expert and having ony just started stepping in the right direction I don't want to appear to be offering advice to all and sundrie. But in the case for Jimhas7 would politely offer the following;
If you are having to rest your chest on the tank to relieve your wrists you are placing too much weight on the bars and therefore your body position is likely to be wrong. I was taught to have enough space to fit a fist between the tank and my groin. The position of your feet is a good indicator of what your legs are doing and whether they are doing it right. The "locked on" thing is your outer leg clamping to the bike to prevent you having to hold onto the handle bars- if you hang onto them and use them to pull yourself over the bike to change direction you will induce wiggles and destabilise the bike. You should be locked on with both knees (infact knees through to feet/inner leg) to brake and accelerate. Infact imagine your bike facing downwards on a 45 degree incline with no handle bars- you would have to clamp on with your knees, that is what you need to achieve and that will maintain your rearward desired seating position.  Now, as I understand it, if your weight is going down through your bars you will run wide. This is because as you lean in you will increase weight through the inside bar which creates a counter steering action and will cause the bike to run wide. The correct position is weight back, outer leg locked on and forearms horizontal to the ground "pushing" the inside bar forward ie pushing the left bar forward to turn left. As the front is pushed left it falls onto the inner left side of the tyre- you are using the profile to turn, not turning the bars left to go left if that makes sense. It has blown my mind getting this concept but now I've got it it has revolutionalised how I ride. I hope this help you Jim.

All advice taken in context good or bad  :icon_thumleft:

I was in inters for the first time and although the general pace of the group was not quick (IMO... or at least it didnt feel that way) mainly due to heavy traffic/group size. When free I was running around 15 seconds quicker than my last outing from the off due to picking up with some quicker guys on good lines (August 2010 was my last outing... which would have been more but just got over a back injury wiping out my 2011 road or track riding season) I found the faster corners easier to get to grips with and was more aggressive in the braking areas (Less afraid of getting it wrong for some reason?) however with the slow corners its always been my achiles heel. I am not as late on the brakes as I could be but had still improved from last time so much so that on a couple of occasions I would tip in thinking theres no way I can make it but if a faster bike was inside me and braking later and getting round I just used that as a confidence booster and would let off the brakes look through the turn and hey ho round she goes and a dam sight quicker than I was used too. But... I could tell my body position was wrong, hence the leaning on the tank a couple of times, I understand the theory of no weight on the bars hence body on the tank to counter it. This had not happened to me before at my old pace so I was puzzled how to fix it and understood I will not get faster in the slow turn until I fix my body position.

Another problem I found on Monday with my new found pace and confidence I was wearing my toesliders out even though I feel I have my toes on the peg I suspect I do not. I am 6`2" with size 12 boots so do struggle a bit to really get "on my toes" on the pegs tbh, and I know I dont hang off that much from my past photo`s from any TD`s done. No matter what I did I just couldnt get the boots out of the way.

On a couple of corners I regularly had to physically fight the bars (Puch as you say) to get the bike to turn but they where generally the faster corners. I was also finding my bars shaking a lot on the corner exits, now is that me pulling on the bars or just the ZX10R head shake appearing  :icon_scratch:

I think more track time is the order of the day for me and sooner or later a CSS session will be on the cards. Am also looking for one more TD before season ends... other than that my plans are to commit to a few more next year for sure now winter is descending upon us.

Top man for putting up the feedback its always good to share experiences it provides useful advice for the true beginer in terms of track time like me
Work experience : Discoverer of caves behind waterfalls, slayer of Demons, spent a short time (a very short time) as keeper of the Heavenly stables (a very over-rated job if you ask me). Currently bodyguard to the jibbering fool Tripitaka (who doesn't appreciate me at all) and full time Great Sage..

robbosliding

I don't personally think the toe slider thing is an issue- your physical size is going to make you more "arms and legs" on a sport bike anyway. If your inside knee is pointing out your inside foot will naturally be pointing outward too. When your "toes" are on the peg we mean the ball of your foot most typically so your toes are most likely protruding slightly, hence the need for sliders. The pegs have hero blobs or "feelers" bolted to them as early warning to let you know you are near to grounding out. Had you considered adjusting your rearsets or fitting adjsutable rearsets to minimise this toe sliding?
Maybe I have misunderstood your resting on the tank? Are you resting weight on it to relieve your wrists or placing weight on the inside of it (I do this with my outside forearm to assist leaning the bike over along with my outside knee). The sensation of bars shaking maybe from holding on too tight, you will recieve too much feedback and the sensation of fighting the bars sounds like my old experience of actually hanging onto the bars ( a bit like a shopping trolley really) which pivot steers the bike from the front backwards, its wrong in any case. I suspect any head shake on a track is too much feedback from too tight a grip. I feel the front slap alittle when revving hard when the front lifts and searches for grip but I let it do it now and don't fight that. The damper on my bike is on a minimal setting too so it doesn't mask an impending disaster. Your experience of riding sounds very, very similar to mine. If you can make your first day next year with CSS do it, it could save you dozens of mis spent track days and road miles. Since the penny has dropped re the techniques it really has been an epithany of riding for me.