News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

hel brake lines

Started by goldie, June 30, 2011, 03:03:18 PM

Previous topic - Next topic

goldie

hello chaps im gona have a go at fitting some new hel brake lines to my 04 at the weekend, ive bled brakes before at work but that's on trucks.
is there anything i should be aware of or a special procedure i should follow when doing them on my bike?
as always gentlemen any feedback is greatly appreciated  :icon_thumright:

tingy

#1
i by no means am any good at bleeding brakes but the way ive done it is to get a clear plastic tube on the bleed nipple and hold it with your thumb over the end then get a mate/other half/well trained pet to pump the brake a few times then lock the bleed nipple off and pour the fluid out of the tube that stops air going back into the system and makes it a bit easier

tap the lines every now and then to try to move any air thats in there about too other then that its lots of messing about until its done right  :dontknow:
IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM!

jeffoboyo1

i was only reading yesterday how to bleed the brakes on my 10r there is a manual on this site , it said to bleed the m/c first then each calipper making sure not to let the fluid in the m/c to get to low. have a look on the manual pages. hope this helps as so far i have only asked for help on here and not been able to give any.

goldie

cheers for the replies chaps i done them today and they were pretty simple, i used your advice tingymagig about putting some fluid in the jar to stop the air coming back up the line and jeffoboyo1's advice about bleeding the m/c first, cheers for the advice  :icon_thumright:

and what a difference by the way highly recommended oh and have a pony each  :occasion14:

jeffoboyo1

hi mate , glad to help somone for a change, how did you give me a pony bhp, i looked on here and it says give somone a plus but how do you do it ...
yet again im with  :iamwithstupid:  :lol:

goldie

when your looking ata atread you can see there name and details on the left hand side of the page and in there it says 'add bhp' just click that and it will put one on  :icon_thumleft:

jeffoboyo1

thanks mate i must owe lots of bhp's by now gona have to look back thro my post's later and dish some out, will start with you for the info.

NellyB

Doing my Brake lines at the moment, done the tube n jar as per but still spongy so i assume m/c wants bleeding  :iamwithstupid:  any tips on this or is it a case of cracking the banjo?
Cheers

I thought Chicken strips were meant for restaurants

Kaos Theory

Quote from: NellyB on July 23, 2012, 08:18:15 AM
Doing my Brake lines at the moment, done the tube n jar as per but still spongy so i assume m/c wants bleeding  :iamwithstupid:  any tips on this or is it a case of cracking the banjo?
Cheers
If they're spongy after bleeding, cable tie the front brake on overnight, should push any air in the system to the top and stiffen up the brakes.

Jak

Quote from: NellyB on July 23, 2012, 08:18:15 AM
Doing my Brake lines at the moment, done the tube n jar as per but still spongy so i assume m/c wants bleeding  :iamwithstupid:  any tips on this or is it a case of cracking the banjo?
Cheers

Yep, place a rag around the m/c and crack open the banjo. I also found it worth while to "back bleed" from the calipers using a big placcy syringe (e bay). Very difficult expelling all the old fluid from the Gen 1 calipers
:-S

faulksie

in my opinion the gen1 calipers where badly designed in that the internal drillings between the upper and lower bores were positioned in a way that allowed air to become trapped and difficult to bleed out whilst fitted to the bike. Removing the calipers and pushing the pistons fully in, then blocking the pistons from moving out while bleeding helped. Then once refitted and after you pumped the pistons out to the discs, top up master cylinder and give a final bleed.
Make sure I treat everyday as it’s the last ! - Cuz one day could be. K.S. R.I.P
www.bikeclubfrance.com

NellyB

Cheers for the swift responses guys  [clap] :icon_thumright: :icon_thumright: :icon_thumright:

I thought Chicken strips were meant for restaurants

terry

Recently finished building there new support truck that they take to race meeting's, monster of a thing, they have pictures of it on the website and there FB page.