News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

Just fitted full stainless to zx7

Started by NINJA ED, March 08, 2011, 05:17:51 PM

Previous topic - Next topic

NINJA ED

As above just fitted full stainless bloody hell its loud and thats with the baffle in pops and bangs as soon as you pull throttle :tongue3: Not to bothered though be going to black isle at some point soon to get stage 1 dynojet kit fitted and set up impressed performance wise when it was standard cant wait to see what she puts out on dyno set up properly  >:D
FLAT OOT LIKE A DUCKS FIT !!!

gsxr7111000


Andy J

a full stainless what is it a Micron, they were really popular back then  :icon_thumleft: 

good to hear that it's coming along and have to agree that flatties need to be considered  ;-)

NINJA ED

Was looking at a set of flatsides on the bay werent that expensive either its just a custom made stainless header andy no restrictions straight through and end can is custom made aswell. I thought the 10 was loud without baffles  :shock: Been doing a bit of research aswell on the 7 mine is an import was imported from new im hoping its an american import as they had slipper clutches fitted havnt had a chance to find out yet soon find out when i take her for a proper run  >:D
FLAT OOT LIKE A DUCKS FIT !!!

Andy J

I thought that they all had slipper clutches since the ZXR750H1 in 1988  :icon_scratch:

Flatties are a good mod but do take some setting up from what i recall  :icon_thumleft:

Let's see the pipe then  :icon_thumleft:

NINJA ED

Quote from: Andy J on March 08, 2011, 08:18:29 PM
I thought that they all had slipper clutches since the ZXR750H1 in 1988  :icon_scratch:

Flatties are a good mod but do take some setting up from what i recall  :icon_thumleft:

Let's see the pipe then  :icon_thumleft:
:icon_scratch: just away to regap plugs guy just chucked them in without gapping me thinks ill take pics of everything ive done so far  :icon_thumleft:
FLAT OOT LIKE A DUCKS FIT !!!

Wheeltrax

Quote from: NINJA ED on March 08, 2011, 08:11:58 PM
Was looking at a set of flatsides on the bay werent that expensive either ....
Jeez, I must be looking in the wrong place.
The only flatslides (FCR) Ive seen are mega bucks.
Gizza clue bud?
If it aint broken fix it till it is  :tongue3:

10R_fettler

 :icon_thumleft: I didnt even have a full system on mine, just a blueflame race can, with a K&N filter and it was soooo loud! I had to sell the can and get a removable baffle one because it was going to get me into trouble sooner or later... The 7R is a loud bike! Hope you get the carbs installed.

NINJA ED

Quote from: Wheeltrax on March 09, 2011, 12:04:00 PM
Quote from: NINJA ED on March 08, 2011, 08:11:58 PM
Was looking at a set of flatsides on the bay werent that expensive either ....
Jeez, I must be looking in the wrong place.
The only flatslides (FCR) Ive seen are mega bucks.
Gizza clue bud?
There was a set theyve finished now dont know what they went for in the end :icon_scratch: ill stick with stage 1 dyno kit just now  [rofl]
FLAT OOT LIKE A DUCKS FIT !!!

gnat

#9
As already been said since the zxr750h1 all the zxr750s zx7rs have a slipper clutch,to activate it you need to change the plates and springs. Also dynojet kits on the 7 are not very well thought of,factorypro kits are the way to go. Also if you change the throttle tube for a zx10r tube you will get a quicker throttle response. HTH
"I got a new sweater,really wanted a screamer or a moaner"

NINJA ED

Quote from: gnat on March 14, 2011, 07:35:51 PM
As already been said since the zxr750h1 all the zxr750s zx7rs have a slipper clutch,to activate it you need to change the plates and springs. Also dynojet kits on the 7 are not very well thought of,factorypro kits are the way to go. Also if you change the throttle tube for a zx10r tube you will get a quicker throttle response. HTH
Cheers for info. Thats why i love this this site great guys and really good advice  :icon_thumleft:
FLAT OOT LIKE A DUCKS FIT !!!

gsxr7111000

Had alot of experiance with flat sides carbs.
I used them on my YZF750 and My YZF1000 zxr750k

The key is to buy any flat side carbs is you can use any from any model or make.
I used a set from a ZX7R and bought the spacer kit from allens carbs.
aim for 39mm or 41mm

And use two throttle cables, They are known to jam open on cold morning like i found out.

Would love to find out where my old bike went to