News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

rearsets and stuff now on

Started by Andy J, April 14, 2007, 01:14:53 PM

Previous topic - Next topic

Andy J

still waiting for my pressure switch for the rear brake light  from another supplier but here are my spangly and cheap £165 rearsets from fleabay, they are those  new 'Daimond' branded ones  :icon_thumright:.

You have to remember that there's only a chainside heelplate included (race setup and a bit of a pisser really) so you'll either have to put the standard plates on and paint em black or get some kind person to sell you some carbon ones like I did  for a nominal fee (cheers G)

I had to add a couple of washers in the gear linkage as the rod was too close to the frame and you have to be careful if you add carbon plates as because they are generally quite thin the bolts supplied will run right through and into the mounting plate as they are quite long.

I have covered around 300 miles and they seem just fine, no probs so far  :icon_thumright:

Think next job is to locktight the setup though just in case anything starts to loosen off






Andy J

and the whole bike, they look loads better than the silver OE's, oh and they add at least 20mph  [rofl] [rofl]






GRNINJA

just the belly pan to sort out and you have one fecking awesome bike ... am very jealous ....  but not for long once my wheels get here and my sussy sorted by MHracing  :icon_thumright:
Ride it like you stole it - or at least try

mikeybeamish

i'm very jealous now..... gonna go to the stationary stores, get a load of permanent markers, and colour mine black.

them wheels look really good fella. i'm pleased for ya.
the rearsets look really cool too, i'm waitin for the brake line fairies in the sky, to send me a rear braidie line  (problem is, hey wont send it until i actualy order it !!!!!!!!!)

fast????   It'll do half an hour in twenty minutes!!!!

GRNINJA

ya could always downgrade ya car and then you would be able to have all the bling in the world  :icon_thumright:
Ride it like you stole it - or at least try

Andy J

cheers fellas, agree that the bellypan will be coming later in the summer as my wedding pressie from Diane  :icon_thumright:

have some bhp  :icon_thumright:

Jon177


zxyogi


mikeybeamish

what the bolts like on the diamond rearsets. bet there better quality than all the shit we insist on buying!!!!!!!!!!
fast????   It'll do half an hour in twenty minutes!!!!

Andy J

Quote from: mikeybeamish on April 15, 2007, 11:17:00 AM
what the bolts like on the diamond rearsets. bet there better quality than all the shit we insist on buying!!!!!!!!!!

the usual mikey. sort of good enough and perfect fit but average quality, depends on how tight you want the bolts torqued to I guess, I wont be taking them off/on so now they are on that's it fella  :icon_thumright:

10rmish

that is a peach of a bike,must agree with G the belly pan needs sorting.

Andy J

cheers Mish, bellypan will come later in the summer  :icon_thumright:

davemfox

It's looking good now mate, especially those PINK wheels  :icon_thumright:

Dave
1993 YZF 750 SP (in PINK/white as a homage to AndyJ)

roxy

andy you have very good taste mate i have the same rearsets :icon_thumleft:
NOBODYS HERO RACING

kwackerszx10r