News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

06 slip on's to bolt on's....

Started by bikertiger, March 08, 2010, 07:47:42 PM

Previous topic - Next topic

bikertiger

So long story
I bought some twin cans' for the 06
Turned out they were off a full system and slip on's
Whilst the 06 is of course a bolt on design
And so - I'm after something to adapt the slip on's to bolt ons
Found a guy who'll give it a go in knocking something up
And so he's after some info
Could any help in getting these number ??? :) And i'll be sure to put it plenty of photo's up after their are fitted

And do we know if the flange is flat.....flange ha ha

If I take the std can's off to take photo's. Is it simply unscrewing the nuts etc and removing the can??

To quote
"Ill need the A , B and C dimensions off your standard cans

If you could also tell me what size the bolts are and if there is a sticky out bit , what diameter and how far it sticks out.
Can you see where the cans bolt on when they are on the bike ?"



One of the can's in question


jamma10566

Might be able to help you out here. Wont know for sure til i get to work tomorrow but i might just have the section you need to be able to fit the slip ons as they are. I bought micron serpent headers, (full system minus the cans) but didnt use all of it.
http://www.zx10r.co.uk/forum/index.php/topic,13400.0.html
See this thread, youll see what i mean.
Sponsor me please, its a very good cause.
http://www.justgiving.com/James-CoryTakesabullet

bikertiger

If you have what I need. I'd be mucho happy ;)
So will next door.....well maybe not them!

jamma10566

I found the piece but i now remember cutting the ends off to make the link pipe. Dont know if this is any use to you. you're welcome to it if you think it might help.
Sponsor me please, its a very good cause.
http://www.justgiving.com/James-CoryTakesabullet

bikertiger

No in short ;)
Thanks for the offer any how bud - Especially as i'm still a newbie to the site.
If I fitted that, I'd then need some link pipes made up
Thus 'i think' it'd be 'easier' to have a simple slip on to bolt on adaptor made up?? (though have been wrong....many times...before )

I just need the measurements - I'll have a bash taking off the std cans this weekend.  Should be easier enough.... :)

thanks again anyhow :)

kinny

getting the standard cans off is pretty straight forward and shouldnt take you to long mate.
good luck with mod hope it all works out for ya :icon_thumleft:
live to ride - ride to live

drewk8


drewk8

just realised its other way round [wall]  bad day ! lol..

might be able to help you though?

hollywood

#8
Here you go mate hope this helps. Measured with the kids plaggy ruler though :-(

bikertiger

#9
Quote from: drewk8 on March 10, 2010, 10:13:24 AM
just realised its other way round [wall]  bad day ! lol..

might be able to help you though?
No to be honest. Those would work a treat - I've forwarded the link to my 'make something up guy' :)


And hollywood (please tell me you named yourself after 'Hollywood' from Top Gun ;) )
I can not see the picture :(

edited - I can see it now :)

Ok - I'll forward it to 'my guy' and see what the scores on the doors are :)
Daft question (there's a running theme with me....)
It is the exhaust we are looking at here??

Thanks guys

hollywood

The pic is the o/s end can HTH Or the barra handle................

bikertiger

#11
Quote from: hollywood on March 10, 2010, 08:29:03 PM
Here you go mate hope this helps. Measured with the kids plaggy ruler though :-(

Turns out those were pretty much spot on bud!
I used a digital calliper measurey thingy - and my measurements matched spot on

One thing.....funny the things you find
Found between the riders seat, pillion seat, in the bodywork! - wonder if the previous owner wants it back



Of note - how much of a pain is it to remove the exhausts!

Also - Can anyone measure an aftermarket exhaust hanger - from where it leaves the exhaust, to the centre hole of the top bolt (at the bike)

bikertiger

Ok - Got the bolt on bits made up :)
As below

My man is just going to get em fitted to the exhausts and send em back
Then hoping the measurements were right as I fit everything to the bike.....
Just need to worry about getting some exhaust hangers and i'll be right

hollywood

#13
Mmmm don't think they look right???????????
Unless you are going to put studs in the threaded holes??

bikertiger

Yeah - just get some new screws - shouldn't be a problem..... I hope!