News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

Chain Lube

Started by BAD BOY NINJA, February 13, 2010, 09:00:42 PM

Previous topic - Next topic

BAD BOY NINJA

What lube are you guys using ? i cant seem to find one that doesnt get all over the back wheel and i just hate that especially after you have just cleaned the bike. There is a few that say they are ant-fling but i have found out that thats not true . The other thing thats not to nice is when you spray them on and they leave your chain all white.  :dontknow:

davemfox

1993 YZF 750 SP (in PINK/white as a homage to AndyJ)

Loopelisa

Wurth dry chain lube for me

HammyUK

Nothing better than EP50 gear oil - put it on when you get back into the garage while the chain is hot - then by the time you've got leathers, etc off - it'll of soaked in and just wipe off the excess.
Its exactly what the race teams use - no power loss, and nice nad clean, and it actually gets into the chain not just sit on top of it.
I don't need 200BHP.........................ask the guys behind me!

big_gaz

I've always used castrol, give the chain a proper clean then dry and coat it in the stuff.  I usually give my chain a proper clean every 250 miles or so that way it stays easy to keep in top nick. Castrol chain cleaner is good stuff though.   :icon_thumright:
Big_Gaz 6'1'' still on a 'kin diet!!

Chappers

I just use a heavy gear oil, put it on with a small brush and wipe the excess off after a while...Tried different chain lubes and just found they made a  big mess

tingy

Quote from: MrsDaddy2Coull on February 13, 2010, 09:04:31 PM
Wurth dry chain lube for me

is this stuff actually any good ive always been a bit sceptical of it meself
IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM!

WAZHALO31

I use Hein Gerickes Profi Dry chain Lube good stuff doesnt flick off like most lubes!  :icon_thumleft:
]

David154

Always wash the chain in parafin with a soft toothbrush to get out the gritty bits...best to take the wheel off so you can drop the chain into the parafin in a plastic container, dry off and use Wurth dry chain lube :icon_thumright:. Might try the gear oil next time though

zx10randy

ep80 gear oil wipe it on with a rag when you get back from a ride stinks a bit but is definatly the best lube out there chain waxes and dry lubes just make a mess everywhere grit just sticks to it and accelerates wear and it dont get into the moving parts of the chain :icon_thumleft:

Charlie

I either use Motorex off road lube, cos it's clear ( I hate white wax) or the Wurth stuff.... both are good lubes and barely fling off.
Refugee admin from www.gixerjunkies.com

wing46


Panzer Division Marcin

doug_zx10r

Quote from: big_gaz on February 13, 2010, 11:14:30 PM
I've always used castrol, give the chain a proper clean then dry and coat it in the stuff.  I usually give my chain a proper clean every 250 miles or so that way it stays easy to keep in top nick. Castrol chain cleaner is good stuff though.   :icon_thumright:
I'd have to wash my chain every two days :shock:

I use Wurth as my main chain lube, with Motul as my second choice.

My last chain and sprockets (ZX6R) lasted 25,000 miles, exactly the same mileage I got from the oem chain and sprockets on the R1.  I usually apply the stuff cold and onto a dirty chain, which is probably a bad thing with alloy sprockets, it forms an abrasive paste, but doesn't matter so much on the oem steel ones.

RedRock

I use one of those Ketten Max things (well used it once on the 6R), does a good job of cleaning the chain, not used it on the 10 yet, as I've only done 160ish miles so far  :-(
David
BMW R1200RT (Pipe and slippers??..B*£!0%$ Bring it on sonny)
ZX10-R Deceased Replacement Pending (Man cannot live on twins alone)