ZX 10 R Forum

Gallery => Gallery => Topic started by: lllN30lll on November 15, 2008, 04:51:44 PM

Title: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on November 15, 2008, 04:51:44 PM
I'm not one of these who cleans their bikes daily, I prefer to ride it. so spent today giving it a wipe down while I was fitting the carbon.

first off was the new Universal fitting kit from Abba, I was a bit wary using it as it uses just an M8 bolt, but once all tightened it was sturdy as can be. and saves me buying different kits for different bikes I use the stand on.

(http://img.photobucket.com/albums/v707/lllN30lll/15112008551.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/15112008552.jpg)

quick before picture before it begins.

(http://img.photobucket.com/albums/v707/lllN30lll/15112008553.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/15112008554.jpg)

wheel out, paraffin in one of those squirty flower feeder things, done.

(http://img.photobucket.com/albums/v707/lllN30lll/15112008556.jpg)

paraffin on the wheel, done.

(http://img.photobucket.com/albums/v707/lllN30lll/15112008558.jpg)

carbon on, wheel fitted :D
(http://img.photobucket.com/albums/v707/lllN30lll/15112008560.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/15112008561.jpg)

front mudguard :D
(http://img.photobucket.com/albums/v707/lllN30lll/15112008565.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/15112008566.jpg)

carbon nom nom nom nom

(http://img.photobucket.com/albums/v707/lllN30lll/15112008567.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/15112008568.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/15112008569.jpg)

Title: Re: Carbon fitted and gave the bike a clean.
Post by: Andy J on November 15, 2008, 05:03:44 PM
the carbon stuff looks nice fella  :icon_thumright:
Title: Re: Carbon fitted and gave the bike a clean.
Post by: Manic636 on November 15, 2008, 11:10:36 PM
looking good especially now its been cleaned (did you hear the bike sigh whilst you washed it??  ;-)
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on November 15, 2008, 11:49:28 PM
Quote from: Manic636 on November 15, 2008, 11:10:36 PM
looking good especially now its been cleaned (did you hear the bike sigh whilst you washed it??  ;-)
I think it was dissapointed, it prefers to be ridden rather than cleaned  [rofl]
Title: Re: Carbon fitted and gave the bike a clean.
Post by: Black10R on November 16, 2008, 01:43:00 PM
That carbon might not look so good the next time you ride, it if you don't wipe some of that fikiin paraffin off the back tyre matey  :icon_thumleft:
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on November 16, 2008, 05:12:00 PM
Quote from: Black10R on November 16, 2008, 01:43:00 PM
That carbon might not look so good the next time you ride, it if you don't wipe some of that fikiin paraffin off the back tyre matey  :icon_thumleft:
gave it all a wash after, didn't get much on  :hello2:
Title: Re: Carbon fitted and gave the bike a clean.
Post by: Black10R on November 16, 2008, 08:07:13 PM
Quote from: lllN30lll on November 16, 2008, 05:12:00 PM
Quote from: Black10R on November 16, 2008, 01:43:00 PM
That carbon might not look so good the next time you ride, it if you don't wipe some of that fikiin paraffin off the back tyre matey  :icon_thumleft:
gave it all a wash after, didn't get much on  :hello2:

Good lad  :tongue3:
Title: Re: Carbon fitted and gave the bike a clean.
Post by: GRNINJA on November 17, 2008, 03:49:28 PM
looking good there fella  :headbang:
Title: Re: Carbon fitted and gave the bike a clean.
Post by: ZX10R-RACER on November 17, 2008, 05:07:52 PM
cool  :icon_thumleft: but i can hear your chain crying out for a good lubing. :tongue3:
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on November 17, 2008, 07:57:09 PM
Quote from: 24-7racebikebitz on November 17, 2008, 05:07:52 PM
cool  :icon_thumleft: but i can hear your chain crying out for a good lubing. :tongue3:

done that too  [rofl]
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on December 11, 2008, 06:35:31 PM
update

Reading this months fastbikes mag i'd seen their project 600. some nice carbon bits on it which included the full fairing.

noticed how well the carbon swingarm protectors mated with the carbon hugger so ordered me a set.

120 quid :D that's for the item, shipping+vat included. Ordered it Monday night, and arrived Thursday morning.

(http://img.photobucket.com/albums/v707/lllN30lll/11122008605.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/11122008606.jpg)

result = not bad... not perfect but still, for 120 quid delivered I can't complain. there's a very minor mark that you can't see unless you really look hard, and one side piece was made from 2 pieces of carbon, you can make out where the weave crosses. but, no biggy.

These were from http://myworld.ebay.co.uk/mss1a not sure if i'll order from them again, but that depends if they make any parts that no other people make. IMO Pro-fiber and Tyga are still the best.

So this weekend I've got to fit the Stebel Nautilus, HRC reservoir kit, and the swingarm protectors. and somehow stop my heels from rubbing the paint off the rear master cylinder lol
Title: Re: Carbon fitted and gave the bike a clean.
Post by: Andy J on December 11, 2008, 09:40:27 PM
looks like you have a serious case of carbonextraitus  :icon_thumright:
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on December 11, 2008, 10:07:12 PM
it's like Pringles, once you pop, you just can't stop  [rofl]
Title: Re: Carbon fitted and gave the bike a clean.
Post by: davemfox on December 12, 2008, 03:42:58 PM
Quote from: lllN30lll on December 11, 2008, 10:07:12 PM
it's like Pringles, once you pop, you just can't stop  [rofl]

[rofl] [rofl] nice one  :icon_thumright:

Dave
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on December 12, 2008, 08:32:23 PM
*nudge*

got as far as this tonight. hope you like the stubby brake reservoir.

might look speccled, as I gave it a quick washdown to remove any excess brake fluid etc.

will be leaving the clamps and duct tape on until tomorrow, then need to paint the master cylinder, and swap which way the heel plate, master cylinder, and rearset are mounted so as not to keep rubbing the paint off the master cylinder. then need to test some plugs to fill the pillion peg holes, and apply the other side of the swingarm protectors. and fit the stebel nautilus.

(http://img.photobucket.com/albums/v707/lllN30lll/12122008610.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/12122008611.jpg)
Title: Re: Carbon fitted and gave the bike a clean.
Post by: Andy J on December 12, 2008, 10:46:47 PM
looking good there 'Stinky'  :icon_thumright:
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on December 12, 2008, 10:49:52 PM
Quote from: Andy J on December 12, 2008, 10:46:47 PM
looking good there 'Stinky'  :icon_thumright:

:pottytrain2:
Title: Re: Carbon fitted and gave the bike a clean.
Post by: Andy J on December 12, 2008, 10:50:40 PM
 [rofl] [rofl]
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on December 13, 2008, 04:23:15 PM
got the tape off and they've set quite well, no gaps and no bulging out.

re-arranged the heel plate so it stops my boot rubbing the master cylinder again.

left side's now taped up, will take pics once the silicones set tomorrow.

Couldn't find a sodding place to put the Stebel :( only in the seat pod which means shed loads of wires as well as the relay to be fitted. will try to see if somebody can do it me.

(http://img.photobucket.com/albums/v707/lllN30lll/13122008612.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/13122008613.jpg)
Title: Re: Carbon fitted and gave the bike a clean.
Post by: Andy J on December 13, 2008, 06:24:54 PM
looking good but please stop !  you are giving me ideas to do similar to mine  [wall] [wall]
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on December 13, 2008, 07:06:51 PM
nowhere near finished yet andy, still got plenty ideas yet.
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on December 14, 2008, 04:56:38 PM
done, Thanks to Jase750 from Gixerjunkies i've now got my stebel all wired up with the relay. Jase's comment after hearing it was "fuck me!" followed by a "ehh?" :lmfao:
sorry for the piss poor pics again, but it was dark and I wanted to pack up, just as I was about to shut the door I got another delivery, pre-load adjusters, unfortunately they're the wrong size :( so if anybody needs some 14mm one's make me an offer.
(http://img.photobucket.com/albums/v707/lllN30lll/14122008617.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/14122008618.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/14122008619.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/14122008620.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/14122008621.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/14122008622.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/14122008623.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/14122008625.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/14122008626.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/13122008612.jpg)
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on December 14, 2008, 05:04:02 PM
LOL forgot to show you the video.

the missus is in the house and you can hear her scream.

(http://img.photobucket.com/albums/v707/lllN30lll/th_14122008103.jpg) (http://smg.photobucket.com/albums/v707/lllN30lll/?action=view&current=14122008103.flv)
Title: Re: Carbon fitted and gave the bike a clean.
Post by: Andy J on December 29, 2008, 11:57:13 PM
what's the fiting kit like as I'm thinking of putting one on the 10 but want to stick it at the front somewhere if poss and how big is the relay and does it mount with the horn pal ?
Title: Re: Carbon fitted and gave the bike a clean.
Post by: zx10r bob on December 30, 2008, 12:31:04 PM
WTF.............. :tongue3:

sounds like you stole it of an ice road trucker......................feeking hell that was loud,,,,,,,,, [rofl] [rofl]
Title: Re: Carbon fitted and gave the bike a clean.
Post by: fido on December 30, 2008, 04:22:13 PM
Any chance of taking some pics that we can actualy see?
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on December 30, 2008, 08:14:36 PM
Quote from: fido on December 30, 2008, 04:22:13 PM
Any chance of taking some pics that we can actualy see?
only got these sorry, the plates peeling off, but it doesn't matter because i've just brought a carbon tail section and carbon seat pod, so the undertray will be sprayed black.
(http://img.photobucket.com/albums/v707/lllN30lll/19122008643.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/23122008654.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/23122008652.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/23122008653.jpg)
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on January 03, 2009, 04:44:05 PM
Carbons arrived.

quality's of the tail section is good, 1 very small crack but you won't notice. Otherwise everythings fine, no fogging in the laquer, no poor weave.

pillion pod is flawless, perfect all over, not bad for 40 quid.

sorry for so many pics, but it helps people see the quality of the items in case they want to order, the pods from ip.performance, and the tail sections from GBmoto.

PS, not fitted it as i've got to spray the undertray black tomorrow, and that needs putting on first, then the others bolt to it.
(http://img.photobucket.com/albums/v707/lllN30lll/03012009705.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/03012009706.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/03012009707.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/03012009708.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/03012009709.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/03012009710.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/03012009711.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/03012009712.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/03012009716.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/03012009718.jpg)
Title: Re: Carbon fitted and gave the bike a clean.
Post by: bond_yzf on January 03, 2009, 05:11:47 PM
cracking looking bike m8 does ip performance have a website ?
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on January 03, 2009, 05:29:53 PM
Quote from: bond_yzf on January 03, 2009, 05:11:47 PM
cracking looking bike m8 does ip performance have a website ?
http://myworld.ebay.co.uk/ip.performancemotorcycles?ssPageName=ADME:X:CEM:GB:1181
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on January 03, 2009, 05:55:47 PM
Quote from: psg1 on January 03, 2009, 05:47:41 PM
looking good in carbon,thought about the frame protectors / swingarm cover for the 10r..........

i like the stealth gixxer,but think carbon look will look sooooo much better,you doing the tank nc30?
on the gixxer half the tank on show is metal, and half is the airbox cover. It'll be a black tank with the carbon airbox cover on it.
Title: Re: Carbon fitted and gave the bike a clean.
Post by: Andy J on January 03, 2009, 05:57:13 PM
why did you buy a 'shellsuit' one rather than black  :dontknow:
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on January 03, 2009, 05:58:55 PM
Quote from: Andy J on January 03, 2009, 05:57:13 PM
why did you buy a 'shellsuit' one rather than black  :dontknow:
I like the blue/white scheme, turns heads. Gets more looks than the black one's.

Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on January 04, 2009, 04:09:11 PM
Got the undertray done in my workshop/spraybooth (kitchen) I went for a Satin black. Not bad for my first time ever spraying anything lol.

(http://img.photobucket.com/albums/v707/lllN30lll/04012009722.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/04012009726.jpg)

got the seat fitted, not a great fit, but you get what you pay for I s'pose

(http://img.photobucket.com/albums/v707/lllN30lll/04012009730.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/04012009731.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/04012009732.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/04012009732.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/04012009733.jpg)
this is the edge that was poor, oh well lol
(http://img.photobucket.com/albums/v707/lllN30lll/04012009734.jpg)

Not gonna bother putting a plate on it yet, no rush.
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on January 09, 2009, 07:18:11 PM
went out today to try find the little clip that holds your brake line to your front mudguard. D&K wanted 10 quid, so came home lol

PS Methinks I need a new chain, the road salts claimed this one as a victim

(http://img.photobucket.com/albums/v707/lllN30lll/09012009739.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/09012009740.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/09012009741.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/09012009742.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/09012009743.jpg)
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on January 23, 2009, 05:58:02 PM
Well, today I got sick of the Fi light showing, error code gave a SET valve jammed error.

so the f*cking thing went in the bin. less weight, more noise, and another 2bhp.


(http://img.photobucket.com/albums/v707/lllN30lll/23012009752.jpg)

and if I get time tomorrow i'll be fitting these.
(http://img.photobucket.com/albums/v707/lllN30lll/23012009753.jpg)
Title: Re: Carbon fitted and gave the bike a clean.
Post by: scooby on January 23, 2009, 06:45:40 PM
you wanna explain the extra 2 hp?


or should i just link you to me asking you  on the other forum?  [rofl]
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on January 23, 2009, 07:04:42 PM
stop following me around  [rofl]

as said, it's what I read here http://www.gixxer.com/forums/showthread.php?t=98240
Title: Re: Carbon fitted and gave the bike a clean.
Post by: mc101 on January 23, 2009, 07:12:35 PM
Will you two get a room  [rofl]
Title: Re: Carbon fitted and gave the bike a clean.
Post by: fido on January 24, 2009, 02:04:08 PM
Make sure its a big room so he can stick all those pics on the walls.....Might save them from being on here  [rofl] [rofl] [rofl]
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on January 24, 2009, 06:24:04 PM
bit more work today.

fitted the front lines.

out with the old.
(http://img.photobucket.com/albums/v707/lllN30lll/24012009754.jpg)

in with the new.
(http://img.photobucket.com/albums/v707/lllN30lll/24012009763.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/24012009764.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/24012009765.jpg)

I've not done the rear as I'm taking the master cylinder off tomorrow to get powdercoated at work on Monday.

whilst the system was bled decided to do something about the pipe from MC to reservoir.
needed to replicate this got awful angle somehow.
(http://img.photobucket.com/albums/v707/lllN30lll/24012009755.jpg)

off to the gas stove, and a few attempts got this. Not too bad.
(http://img.photobucket.com/albums/v707/lllN30lll/24012009762.jpg)

then the carbon seat pod, I never showed you lot, but the LHS was a poor fit, could very easily get your fingers under the gap
(http://img.photobucket.com/albums/v707/lllN30lll/04012009737.jpg)

some work on the boss's, bit of wet and dry and tape measure and you can see how much I had to take off the LHS boss to get the pod even.
(http://img.photobucket.com/albums/v707/lllN30lll/24012009760.jpg)

result, much better IMO.
(http://img.photobucket.com/albums/v707/lllN30lll/24012009757.jpg)

Title: Re: Carbon fitted and gave the bike a clean.
Post by: drewk8 on January 24, 2009, 07:22:26 PM
nice mate.. look even better without the " junkies" decals!  [rofl]
only joking.. i was a junkie from day one ish.. used to be admin till i bought a Kwak !  :shock:

best thing i EVER did... :headbang:

like the work  :icon_thumright:

ps.. is the rear tyre new or you just go in straight lines?
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on January 24, 2009, 07:30:51 PM
Quote from: drewk8 on January 24, 2009, 07:22:26 PM
nice mate.. look even better without the " junkies" decals!  [rofl]
only joking.. i was a junkie from day one ish.. used to be admin till i bought a Kwak !  :shock:

best thing i EVER did... :headbang:

like the work  :icon_thumright:

ps.. is the rear tyre new or you just go in straight lines?
cool

the tires a cheapy part worn until summer comes, I have to go up and down the A50 dual carriageway everyday, so putting super stickys on it dead money.
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on February 01, 2009, 05:38:30 PM
been out most of the day looking for somebody that sells acf50 so not got much done.

Fitted a TRE, so more power in the 1st 4 gears and the 186mph limit removed. Haven't had chance to test it but the tickover was perfect ( some give you bad tickover problems)

(http://img.photobucket.com/albums/v707/lllN30lll/01022009776.jpg)

and changed from this
(http://img.photobucket.com/albums/v707/lllN30lll/01022009777.jpg)

to this, +2
(http://img.photobucket.com/albums/v707/lllN30lll/01022009778.jpg)

and the black sprocket nuts, 17 quid!!!
(http://img.photobucket.com/albums/v707/lllN30lll/01022009779.jpg)

chains looking a little tired after this winter, really need a new one now.
(http://img.photobucket.com/albums/v707/lllN30lll/01022009780.jpg)

and I've just removed the rear master cylinder so it can be powdercoated tomorrow, I can then fit the rear HEL line.
Title: Re: Carbon fitted and gave the bike a clean.
Post by: fido on February 01, 2009, 07:12:37 PM
Oh great more pics to look forward too  :dontknow:  [rofl] [rofl] [rofl]
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on February 01, 2009, 07:27:07 PM
just think of it as an ongoing project lol
Title: Re: Carbon fitted and gave the bike a clean.
Post by: Andy J on February 01, 2009, 11:36:46 PM
nice work Glyn  :icon_thumright:
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on February 06, 2009, 06:02:12 PM
I had a few hours break today from Xbox flashing, so...

fitted the rear HEL line, and also fitted the new powdercoated master cyclinder I got done at work ( cost a cup of coffee :D )

made some more boot room by re-housing the Stebel into a place where the noise can actually travel, it was being suffocated under the boot and couldn't hear it. Luckily I'd removed the SET valve servo motor which left a nice gap behind the engine and a nice gap for the sound to be expelled from.
(http://img.photobucket.com/albums/v707/lllN30lll/06022009783.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/06022009785.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/06022009786.jpg)
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on February 18, 2009, 09:22:23 PM
got these today, BIG thanks to Paul @ Tyga, another top quality part, flawless weave, and very well made!! and thanks to Gavin @ Jap4performance for knocking me £50 off and giving me free delivery!!!!!!!!!

(http://img.photobucket.com/albums/v707/lllN30lll/18022009005.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/18022009006.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/18022009007.jpg)
Title: Re: Carbon fitted and gave the bike a clean.
Post by: Andy J on February 18, 2009, 09:45:32 PM
bloody hell Glyn you're addicted to carbon ,looking good  :icon_thumright:
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on February 18, 2009, 09:47:33 PM
Quote from: Andy J on February 18, 2009, 09:45:32 PM
bloody hell Glyn you're addicted to carbon ,looking good  :icon_thumright:
my blokes just finishing off the side panels and nose cone in carbon, seems like i've been waiting forever, apparently they're going public with them in march. After that there's only a few more carbon parts available for me.
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on February 18, 2009, 09:48:13 PM
forgot to say, I'm off to D&K on friday for an ECU remap, hoping to hit at least 180 at the wheel.
Title: Re: Carbon fitted and gave the bike a clean.
Post by: Andy J on February 18, 2009, 10:32:27 PM
(http://www.sporthull.co.uk/media/content/180darts.jpg)
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on February 18, 2009, 10:49:06 PM
 [rofl] I never thought of it like that.
Title: Re: Carbon fitted and gave the bike a clean.
Post by: fido on February 19, 2009, 08:25:24 AM
Quote from: Andy J on February 18, 2009, 09:45:32 PM
bloody hell Glyn you're addicted to carbon ,looking good  :icon_thumright:

Addicted to posting pics more like  [rofl] [rofl]
Title: Re: Carbon fitted and gave the bike a clean.
Post by: fido on February 19, 2009, 08:26:49 AM
Quote from: lllN30lll on February 18, 2009, 09:48:13 PM
forgot to say, I'm off to D&K on friday for an ECU remap, hoping to hit at least 180 at the wheel.

If carbon increases BHP you will have no problem hitting  that figure  :icon_thumleft:
Title: Re: Carbon fitted and gave the bike a clean.
Post by: drewk8 on February 19, 2009, 01:09:32 PM
chain looks a bit rusty? :shock:
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on February 19, 2009, 08:36:23 PM
got the tank cover fitted, Tyga carbon is always a perfect fit.

not swapped the chrome S's over yet as ran out of time, will get the hairdryer on it tomorrow after I get back from the dyno.

K+N and renthal grips were easy enough to do.

the Tank Infils really stick out now, bloody suzuki's crap attempt at making them look like carbon, they'll be replaced next.

(http://img.photobucket.com/albums/v707/lllN30lll/19022009009.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/19022009011.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/19022009012.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/19022009014.jpg)
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on February 24, 2009, 10:01:23 PM
latest pic, If I get the time i'll spray the tank white.
(http://img.photobucket.com/albums/v707/lllN30lll/20022009016.jpg)
Title: Re: Carbon fitted and gave the bike a clean.
Post by: drewk8 on February 25, 2009, 07:03:25 AM
looks a beaut mate. loved my old K5, didnt like the 07/08 one but with single exhaust much better. be even more betterererer with w Growler.... :glasses9:
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on March 09, 2009, 06:33:01 PM
Shorty Pazzo's with black adjusters arrived today, om nom nom.
(http://img.photobucket.com/albums/v707/lllN30lll/09032009035.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/09032009034.jpg)
Title: Re: Carbon fitted and gave the bike a clean.
Post by: FLuke on March 09, 2009, 07:51:31 PM
looking great dude!

if there is a world shortage in carbon we know who to blame  [rofl]
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on July 03, 2010, 05:03:32 PM
WOW

Forgot to update this forum didn't I lol.

A few pics after today.

Bikes back together, honest opinions please.

(http://img.photobucket.com/albums/v707/lllN30lll/IMG_0025.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/IMG_0024.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/IMG_0023.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/IMG_0022-1.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/IMG_0021-1.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/IMG_0020.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/IMG_0019.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/IMG_0018.jpg)
Title: Re: Carbon fitted and gave the bike a clean.
Post by: Andy J on July 03, 2010, 05:12:58 PM
chavtastic  :icon_thumright:
Title: Re: Carbon fitted and gave the bike a clean.
Post by: scooby on July 03, 2010, 05:40:07 PM
honestly?


the swingarm looks silly half done,blue fairings and carbon dont go,tank cover looks out of place.at least it's clean. :icon_thumleft:



tail  unit looks good though  [whistle]
Title: Re: Carbon fitted and gave the bike a clean.
Post by: jimhas7 on July 03, 2010, 06:08:02 PM
Im not liking the frame carbon look in general but have to say this looks Great overall.

Number plate looks tidy  :shock:
Title: Re: Carbon fitted and gave the bike a clean.
Post by: WAZHALO31 on July 03, 2010, 06:40:10 PM
Looks great!
Title: Re: Carbon fitted and gave the bike a clean.
Post by: kwaka jack on July 03, 2010, 08:22:36 PM
change the exhuast for a carbon one and it'll look good imo
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on July 03, 2010, 08:50:13 PM
The tank and side panels are still to be done, don't worry, I'm not leaving it as it is.

Tank will be white, and the blue side panels will be carbon if I can source some.
Title: Re: Carbon fitted and gave the bike a clean.
Post by: silky22 on July 03, 2010, 09:37:39 PM
Quote from: Andy J on July 03, 2010, 05:12:58 PM
chavtastic  :icon_thumright:

fookin dead rite mate, but to be honest i prefer the streetfighter look  [whistle] [whistle]
hey glynn its lookin good kidda  :icon_thumright:
Title: Re: Carbon fitted and gave the bike a clean.
Post by: bond_yzf on July 04, 2010, 09:08:07 AM
it looks good m8 think the rear end looks a bit plain ie, too much in carbon
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on July 04, 2010, 09:17:38 AM
Quote from: bond_yzf on July 04, 2010, 09:08:07 AM
it looks good m8 think the rear end looks a bit plain ie, too much in carbon
I think I'll put the white indicator pods back on, and do the tank white.
Title: Re: Carbon fitted and gave the bike a clean.
Post by: bond_yzf on July 04, 2010, 09:19:49 AM
Quote from: lllN30lll on July 04, 2010, 09:17:38 AM
Quote from: bond_yzf on July 04, 2010, 09:08:07 AM
it looks good m8 think the rear end looks a bit plain ie, too much in carbon
I think I'll put the white indicator pods back on, and do the tank white.

yeah sounds good m8 just break it up a bit, big fan of the carbon tho what is pro-fiber like i see them on ebay was thinking of ordering a few bits and bobs
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on July 05, 2010, 05:09:38 PM
I couldn't resist, Winging it's way from California.

(http://img.auctiva.com/imgdata/1/3/8/3/5/7/6/webimg/375274347_o.jpg)
(http://img.auctiva.com/imgdata/1/3/8/3/5/7/6/webimg/369932313_o.jpg)
(http://img.auctiva.com/imgdata/1/3/8/3/5/7/6/webimg/369932317_o.jpg)
Title: Re: Carbon fitted and gave the bike a clean.
Post by: Andy J on July 06, 2010, 09:20:24 PM
that'll be better 'Stinky' with the tracksuit colours gone and then a carbon growler and carbon wheels and the jobs a good un  :icon_thumright:
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on August 25, 2010, 05:53:41 PM
Alright lads.. Hows tricks?

Got an update for you :D

Bye Bye Blue tank.

(http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs190.snc4/37863_10150219113040212_671540211_13667396_5346142_n.jpg)

Hello white tank.

(http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs024.ash2/34544_10150220418765212_671540211_13699543_6860338_n.jpg)

and a 1/8 turn keyless fuel cap and white decals for the new carbon panels.

(http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs055.snc4/35112_10150220420230212_671540211_13699580_2795707_n.jpg)

Carbon side panels arrived,.

(http://img.photobucket.com/albums/v707/lllN30lll/53754334.jpg)

A few

(http://img.photobucket.com/albums/v707/lllN30lll/fc436a21.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/8d414b41.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/ea9ac57a.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/8d72e290.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/90ad8c56.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/339c7453.jpg)


But then.... It all went wrong........




A set of carbon wheels arrived lol.
(http://img.photobucket.com/albums/v707/lllN30lll/2a107100.jpg)



Result SO FAR

(http://img.photobucket.com/albums/v707/lllN30lll/3c72c4c8.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/98c2b082.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/5521d3f1.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/e12b7979.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/223fd02b.jpg)
Title: Re: Carbon fitted and gave the bike a clean.
Post by: zxyogi on August 25, 2010, 06:57:28 PM
Nice....very nice for a Gix!!  :headbang:
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on August 25, 2010, 09:04:29 PM
Cheers

A lot diff from the last time I met you lads :)
Title: Re: Carbon fitted and gave the bike a clean.
Post by: Andy J on August 25, 2010, 10:11:28 PM
that's looking a lot better now Stinky  [whistle]

shame about the kids scribbling on the rear panels but a bit of t cut will sort that hopefully  :lol: and why didn't you get ridof the tank stripes  :dontknow:

you'll be selling your shellsuits next  :shock:

Title: Re: Carbon fitted and gave the bike a clean.
Post by: silky22 on August 25, 2010, 10:18:27 PM
well ive always said you carnt polish a turd  ;-)
but you clearly have put some elbow grease into it  [clap] [clap] [clap]
looks good kidda  :icon_thumright:
Title: Re: Carbon fitted and gave the bike a clean.
Post by: fringe80 on August 26, 2010, 03:39:35 PM
very nice work mate  :headbang:
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on August 26, 2010, 06:03:52 PM
Replaced the right hand infil today. I lost it while wheelying down the M1  [rofl]

Also ordered a carbon clock support that sheds a shit loads of weight apparently.
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on August 31, 2010, 06:56:05 AM
Not sure if any of you heard, But I crashed it :(

Threw it down the road, I'll be back next year  [wall]
Title: Re: Carbon fitted and gave the bike a clean.
Post by: tony83 on August 31, 2010, 09:59:43 AM
did the wheels survive?

(Fellow bst owner)
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on August 31, 2010, 11:23:27 AM
rear yes, front I don't think so, rim got damaged but it's holding air.
Title: Re: Carbon fitted and gave the bike a clean.
Post by: Chrisblack10r on August 31, 2010, 06:12:46 PM
Quote from: lllN30lll on August 31, 2010, 06:56:05 AM
Not sure if any of you heard, But I crashed it :(

Threw it down the road, I'll be back next year  [wall]

dear god not again? lol
Title: Re: Carbon fitted and gave the bike a clean.
Post by: Andy J on August 31, 2010, 06:14:39 PM
bollocks fella, i assume that you are ok though  :dontknow:
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on August 31, 2010, 07:25:22 PM
Quote from: Chrisblack10r on August 31, 2010, 06:12:46 PM
Quote from: lllN30lll on August 31, 2010, 06:56:05 AM
Not sure if any of you heard, But I crashed it :(

Threw it down the road, I'll be back next year  [wall]

dear god not again? lol
You must have the wrong person mate, this is my first ever crash.
Title: Re: Carbon fitted and gave the bike a clean.
Post by: Chrisblack10r on August 31, 2010, 09:58:48 PM
Quote from: lllN30lll on August 31, 2010, 07:25:22 PM
Quote from: Chrisblack10r on August 31, 2010, 06:12:46 PM
Quote from: lllN30lll on August 31, 2010, 06:56:05 AM
Not sure if any of you heard, But I crashed it :(

Threw it down the road, I'll be back next year  [wall]

dear god not again? lol
You must have the wrong person mate, this is my first ever crash.

thought it was street fightered cause of an off?
Title: Re: Carbon fitted and gave the bike a clean.
Post by: r1ninja on August 31, 2010, 10:37:30 PM
Quote from: Chrisblack10r on August 31, 2010, 09:58:48 PM


thought it was street fightered cause of an off?

Nah i think that was because  some fairing panels were loaned to tyga performance
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on September 01, 2010, 09:33:30 PM
(http://img.photobucket.com/albums/v707/lllN30lll/18ef1d23.jpg)

Until you get to the other side.

(http://img.photobucket.com/albums/v707/lllN30lll/dacf4eec.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/1d0cf15a.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/2fc88a93.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/4b976a1e.jpg)
(http://img.photobucket.com/albums/v707/lllN30lll/3419e31a.jpg)
Title: Re: Carbon fitted and gave the bike a clean.
Post by: Andy J on September 01, 2010, 10:17:04 PM
come on then Stinky what happened ?
Title: Re: Carbon fitted and gave the bike a clean.
Post by: roy on September 01, 2010, 10:19:44 PM
he fell off  :tongue3:
Title: Re: Carbon fitted and gave the bike a clean.
Post by: Black10R on September 01, 2010, 10:53:06 PM
Sorry pal after all that work ffs  :-( that's shite
Title: Re: Carbon fitted and gave the bike a clean.
Post by: davemfox on September 02, 2010, 09:42:21 AM
Quote from: lllN30lll on August 31, 2010, 06:56:05 AM
Not sure if any of you heard, But I crashed it :(

Threw it down the road, I'll be back next year  [wall]

Sorry to hear that mate  :-( I take it you're ok??

Dave
Title: Re: Carbon fitted and gave the bike a clean.
Post by: David154 on September 02, 2010, 11:30:42 AM
Oh dear sorry to hear that ,...all that work.  :-(  hope your ok.....  Dispatch riders engine bars etc for next  year to protect  all that  c/fibre :tongue3:
Title: Re: Carbon fitted and gave the bike a clean.
Post by: lllN30lll on September 27, 2010, 12:53:04 PM
Well, I'm still paying off the wheels, so the bike hasn't been touched as of yet, pointless anyway as the weathers taken a turn for the worse anyway, so no point bodging it together to get it roadworthy.

Time for a bit of damage control.

Parts to be replaced.

(http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs643.snc4/60346_10150269765560212_671540211_15056336_395821_n.jpg)
(http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs718.snc4/63839_10150269765630212_671540211_15056338_4858266_n.jpg)
(http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs661.snc4/60096_10150269765770212_671540211_15056346_7640138_n.jpg)
(http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs026.snc4/33679_10150269765880212_671540211_15056349_5216750_n.jpg)
(http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs348.ash2/62841_10150269765990212_671540211_15056352_6456312_n.jpg)

Hoping to god Gibbo from GJ's can fix this.
(http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs350.ash2/63032_10150269766155212_671540211_15056356_2284291_n.jpg)
Title: Re: Carbon fitted and gave the bike a clean.
Post by: silky22 on September 27, 2010, 11:04:58 PM
 :shock: :shock: :shock: :shock: :shock:  :crybaby2: you fookin mong  :pottytrain2: least your ok though kidda  :icon_thumright: