ZX 10 R Forum

Bike Stuff => Two Wheel waffle for all => Topic started by: fridayman on February 26, 2007, 11:28:16 AM

Title: New front cog
Post by: fridayman on February 26, 2007, 11:28:16 AM
On Saturday night I finally got round to fitting my Gilles adjusters again, and a -1 front cog. I took it out for a brief spin but my rather kean sense of self preservation was even keaner than usual in the raining darkness, so I decided to save it for Sunday. I was up at 7am on Sunday! Watched it rain for 4 hours... then thought fukit, and went out anyway (and left self preservation to watch some telly).  :brave:

-1 front sprockets are cool!  :icon_thumright:
Title: Re: New front cog
Post by: horse on February 26, 2007, 11:44:03 AM
Welcome to the club have been running -1 for years, great for rolling wheelies in 3rd and 4th.
Title: Re: New front cog
Post by: fridayman on February 26, 2007, 11:56:04 AM
Quote from: horse on February 26, 2007, 11:44:03 AM
Welcome to the club have been running -1 for years, great for rolling wheelies in 3rd and 4th.

I'm still a wheelie noob - only just done a wheelie school, and now looking for somewhere to go practice??? The -1 cog is definitely going to make it much easier.  It made the 750 feel a bit more like my ex-1000.
Title: Re: New front cog
Post by: uzipoo on February 26, 2007, 01:02:05 PM
i'm a wheelie noob (save for frequent front wheel hops when gunning it)
i'm going -1 up front and +2 in the rear when i buy a new chain... anyone running that setup?

any of you bothered to get a speedohealer?
Title: Re: New front cog
Post by: fridayman on February 26, 2007, 01:28:49 PM
Quote from: uzipoo on February 26, 2007, 01:02:05 PM
i'm a wheelie noob (save for frequent front wheel hops when gunning it)
i'm going -1 up front and +2 in the rear when i buy a new chain... anyone running that setup?

any of you bothered to get a speedohealer?

I've gone up 4 at the back on my TL before and loved it. You're looking at the equivalent of about +6 at the back - some might say its bonkers, but you won't know until you've tried  ;-)
Title: Re: New front cog
Post by: KEIRON10R on February 26, 2007, 07:24:39 PM
This topic is just cracking me up!!! [rofl]  16 t on the front?? [rofl] [rofl]  ok when you all learne you will move back trust me...

And as for you H??  suppose it helps with the 1st gear wheelie eh?? [rofl] [rofl]

Title: Re: New front cog
Post by: horse on February 26, 2007, 07:26:57 PM
Quote from: KEIRON10R on February 26, 2007, 07:24:39 PM
And as for you H??  suppose it helps with the 1st gear wheelie eh?? [rofl] [rofl]



Same old line! you not tired with it? go take a break and think off something original....................
Title: Re: New front cog
Post by: KEIRON10R on February 26, 2007, 07:28:42 PM
Quote from: horse on February 26, 2007, 07:26:57 PM
Quote from: KEIRON10R on February 26, 2007, 07:24:39 PM
And as for you H??  suppose it helps with the 1st gear wheelie eh?? [rofl] [rofl]



Same old line! you not tired with it? go take a break and think off something original....................


mmmm were not all as thoughtfull as you my dear friend :icon_thumright: :pottytrain2:
Title: Re: New front cog
Post by: uzipoo on February 26, 2007, 08:29:48 PM
Quote from: KEIRON10R on February 26, 2007, 07:24:39 PM
This topic is just cracking me up!!! [rofl]  16 t on the front?? [rofl] [rofl]  ok when you all learne you will move back trust me...

eh?
explain
Title: Re: New front cog
Post by: KEIRON10R on February 26, 2007, 08:56:16 PM
16 brings em easier, ???  but no good for holding through the box?
Title: Re: New front cog
Post by: uzipoo on February 26, 2007, 10:27:44 PM
depends tho dunnit... i've felt that i really need the -1f setup on the track to break up the first gear and get some 2nd gear proper power

.. and on the street, well anything that helps it come up easy off the throttle is fine by me  :tongue3:

at the moment i have to:

a) 30mph... shut off throttle.. snap open throttle... bingo up she comes
b) 60mph... 1st gear.. 7000rpm.. wrench throttle back.. bingo up she comes

... and so basically, i'd like to take off from a standstill and just ride out 1st gear until she comes up - with no snapping the throttle etc.
Title: Re: New front cog
Post by: Andy J on February 26, 2007, 10:33:18 PM
mine lifts off the throttle in 1 and 2 really easily and with a bit of effort in 3 with standard gearing  :icon_scratch:

It lifts over any undulations in all gears too........... maybe with my new rear shock dialled in it'll be more stuck to the road though, maybe the standard shock was too hard  :dontknow:
Title: Re: New front cog
Post by: KEIRON10R on February 26, 2007, 10:48:29 PM
Quote from: uzipoo on February 26, 2007, 10:27:44 PM
depends tho dunnit... i've felt that i really need the -1f setup on the track to break up the first gear and get some 2nd gear proper power

.. and on the street, well anything that helps it come up easy off the throttle is fine by me  :tongue3:

at the moment i have to:

a) 30mph... shut off throttle.. snap open throttle... bingo up she comes
b) 60mph... 1st gear.. 7000rpm.. wrench throttle back.. bingo up she comes

... and so basically, i'd like to take off from a standstill and just ride out 1st gear until she comes up - with no snapping the throttle etc.


I snapp in 2nd or 3rd and up, use 2nd for short runs or 3rd for speed wheelie :icon_thumright:
Title: Re: New front cog
Post by: KEIRON10R on February 26, 2007, 10:49:58 PM
But agree, on track i would like to up on the front to calm the 1st and 2nd pull?
Title: Re: New front cog
Post by: horse on February 27, 2007, 05:59:04 AM
Quote from: KEIRON10R on February 26, 2007, 10:49:58 PM
But agree, on track i would like to up on the front to calm the 1st and 2nd pull?


Stop pretenting to be so knowledgeable!!!!
Title: Re: New front cog
Post by: uzipoo on February 27, 2007, 08:46:19 AM
Quote from: KEIRON10R on February 26, 2007, 10:49:58 PM
But agree, on track i would like to up on the front to calm the 1st and 2nd pull?

blimey! now we're on about UPPING the front ??

it'd feel like a damn 600 geared like that. you might see a genuine 190mph topend tho  B-)

with regards to power wheelies.. i guess i'm just not snapping hard enough. this will be my second season with the 10r so i'll try harder
Title: Re: New front cog
Post by: fridayman on February 27, 2007, 11:13:01 AM
Quote from: KEIRON10R on February 26, 2007, 08:56:16 PM
16 brings em easier, ???  but no good for holding through the box?


I didn't go 16 to pull wheelies, I fitted it to get better drive...  [naughty]

Think I might go +1 at the back too, to get back to the original wheelbase. Anyone know where is the cheapest place to get a Speedohealer?
Title: Re: New front cog
Post by: horse on February 27, 2007, 02:18:31 PM
I did............................
(http://i136.photobucket.com/albums/q171/horse_ZX10R/Wheeling/DSCF2596.jpg)
Title: Re: New front cog
Post by: GRNINJA on February 27, 2007, 05:26:35 PM
 :pottytrain2:
Title: Re: New front cog
Post by: KEIRON10R on February 27, 2007, 05:27:58 PM
didn,t want to say anything?  [rofl] :icon_thumright:
Title: Re: New front cog
Post by: horse on February 27, 2007, 06:46:31 PM
Don't see any pictures from last "TWO MUPPETS" that posted! so sit down and shut up.................................
Title: Re: New front cog
Post by: zxyogi on February 27, 2007, 08:02:30 PM
 :lol:


Well...i'm going to play with a 40t and 41t sprocket to see what i like best,dont think you need to go more than that in my opinion but hey.....rock on!!  :headbang:
Title: Re: New front cog
Post by: GRNINJA on February 27, 2007, 08:18:12 PM
Quote from: horse on February 27, 2007, 06:46:31 PM
Don't see any pictures from last "TWO MUPPETS" that posted! so sit down and shut up.................................

not  sheep mate don't need to follow the crowd  :roll:
Title: Re: New front cog
Post by: KEIRON10R on February 27, 2007, 10:28:46 PM
 [rofl] [rofl] [rofl] get back in your (http://i148.photobucket.com/albums/s5/Keiron10R/Misc/basckett.jpg)


Oh and you better put on your (http://i148.photobucket.com/albums/s5/Keiron10R/Misc/3938243593.jpg)


(http://bestsmileys.com/lol/4.gif)
Title: Re: New front cog
Post by: horse on February 28, 2007, 05:12:57 AM
child  :pottytrain2: