ZX 10 R Forum

Bike Stuff => Two Wheel waffle for all => Topic started by: nuddy on August 12, 2008, 12:55:16 PM

Title: GSXR1000 K4 Clutch Problem!!
Post by: nuddy on August 12, 2008, 12:55:16 PM

A friend of mine has just brought a GSXR1000 K4, it has only done 5k miles, anyway he took the bike out last night for its first proper ride and after about 10 mins the clutch starts slipping and eventually the bike was unridable.

My thoughts were the previous owner was a wheelie adict and has fried the clutch ?

Any suggestions would be much appreciated as my friend has not had the best of luck this year with bikes  :dontknow:
Title: Re: GSXR1000 K4 Clutch Problem!!
Post by: MajicKwak on August 12, 2008, 01:09:51 PM
The clutch started slipping on my 636 when I overfilled the oil.  Not sure it's much help though.  :icon_scratch:
Title: Re: GSXR1000 K4 Clutch Problem!!
Post by: ZX10R-RACER on August 12, 2008, 01:19:14 PM
when you over filled it with oil!!!

suzuki clutches are in a word "shit" it`s not a major problem will probably will just need friction plates
i just happen to sell these  :icon_thumleft:
Title: Re: GSXR1000 K4 Clutch Problem!!
Post by: nuddy on August 12, 2008, 02:15:40 PM

Whats the damage 24-7 and is it a straight forward job?
Title: Re: GSXR1000 K4 Clutch Problem!!
Post by: truescot on August 12, 2008, 03:31:04 PM
This may seam like a silyl suggestion but on my k3 gixxer when i over-filled the oil the clutch began to slip, i removed all the oil and did a filter change and all worked perfectly again, i do not know why this is, i just know it was a cause/effect thing and it worked. Also i never refilled the oil for a couple of days to let everything drip off

edit - i didnt notice 24-racebike had already mentioned the oil, but at least i know i am not crazy(well not much)
Title: Re: GSXR1000 K4 Clutch Problem!!
Post by: MajicKwak on August 12, 2008, 03:41:29 PM
Quote from: truescot on August 12, 2008, 03:31:04 PM
This may seam like a silyl suggestion but on my k3 gixxer when i over-filled the oil the clutch began to slip, i removed all the oil and did a filter change and all worked perfectly again, i do not know why this is, i just know it was a cause/effect thing and it worked. Also i never refilled the oil for a couple of days to let everything drip off

edit - i didnt notice 24-racebike had already mentioned the oil, but at least i know i am not crazy(well not much)

Did you not notice that that's what I said.  :dontknow:
Title: Re: GSXR1000 K4 Clutch Problem!!
Post by: truescot on August 12, 2008, 03:43:30 PM
Quote from: MajicKwak on August 12, 2008, 03:41:29 PM
Quote from: truescot on August 12, 2008, 03:31:04 PM
This may seam like a silyl suggestion but on my k3 gixxer when i over-filled the oil the clutch began to slip, i removed all the oil and did a filter change and all worked perfectly again, i do not know why this is, i just know it was a cause/effect thing and it worked. Also i never refilled the oil for a couple of days to let everything drip off

edit - i didnt notice 24-racebike had already mentioned the oil, but at least i know i am not crazy(well not much)

Did you not notice that that's what I said.  :dontknow:

oops, didnt read that far up either so sorry clearly majickwak also has both the knowledge to know it could be oil and the stupidity to overfill it :) (tho noth the stupidity to post the same piece of advise for a third time :))
Title: Re: GSXR1000 K4 Clutch Problem!!
Post by: davemfox on August 12, 2008, 08:41:57 PM
Quote from: 24-7racebikebitz on August 12, 2008, 01:19:14 PM

suzuki clutches are in a word "shit" it`s not a major problem will probably will just need friction plates
i just happen to sell these  :icon_thumleft:


That's not quite true Liam....

I've been running GSXR's for the last 11 years in one form or another and it depends how you look after them and service them.

Dave
Title: Re: GSXR1000 K4 Clutch Problem!!
Post by: ZX10R-RACER on August 12, 2008, 09:40:36 PM
trust me there not that bad but as far as the Japanese four go suzuki clutches and gear boxes are made from chocolate.
I will pm a prices of the different clutch kits available.

Title: Re: GSXR1000 K4 Clutch Problem!!
Post by: nuddy on August 15, 2008, 08:54:27 PM

Well the cover come off tomorrow!!

We are a bit concerned as the clutch cover has blue instant gasket everywhere  :shock:

Me think 'Bill the butcher' has been at work  :pottytrain2:

Title: Re: GSXR1000 K4 Clutch Problem!!
Post by: Andy J on August 15, 2008, 09:28:32 PM
I have to say from my experiences Suzuki clutches are bloody good, Yamaha's are crap for sure.  It's th first I've heard of a Suzuki clutch problem so maybe the oil is overfilled like the others have said, is it ?

It's real east to change the friction plates but if you do I's leave them to soak in oil ovenight before fitting them  else you could fry them straight away  :icon_thumright:
Title: Re: GSXR1000 K4 Clutch Problem!!
Post by: nuddy on August 15, 2008, 10:32:25 PM

Didn't realise you need to soak the plates overnight  before you fit them  :shock:

keep you update

Thanks AJ



Title: Re: GSXR1000 K4 Clutch Problem!!
Post by: Andy J on August 15, 2008, 10:34:58 PM
you don't have to but it saves them  :icon_thumright:
Title: Re: GSXR1000 K4 Clutch Problem!!
Post by: davemfox on August 16, 2008, 06:32:46 AM
Quote from: 24-7racebikebitz on August 12, 2008, 09:40:36 PM
trust me there not that bad but as far as the Japanese four go suzuki clutches and gear boxes are made from chocolate.
I will pm a prices of the different clutch kits available.



As I said before Liam you are wrong about Suzuki clutches...Yamaha clutches are weak (as Andy said above)

Dave
Title: Re: GSXR1000 K4 Clutch Problem!!
Post by: truescot on August 16, 2008, 09:19:50 AM
Quote from: davemfox on August 16, 2008, 06:32:46 AM
Quote from: 24-7racebikebitz on August 12, 2008, 09:40:36 PM
trust me there not that bad but as far as the Japanese four go suzuki clutches and gear boxes are made from chocolate.
I will pm a prices of the different clutch kits available.



As I said before Liam you are wrong about Suzuki clutches...Yamaha clutches are weak (as Andy said above)

Dave

i'm not too sure about all the yam clutches,  I wheelied my 98 r1 everywhere and was putting 50k(km) a year on the clock easily and had i t for almost 3 years and never a problem with the clutch
Title: Re: GSXR1000 K4 Clutch Problem!!
Post by: r1ninja on August 16, 2008, 09:23:21 AM
Suzukis have for years had the sweetest gearboxes in motorcycling
Title: Re: GSXR1000 K4 Clutch Problem!!
Post by: ZX10R-RACER on August 16, 2008, 10:09:11 AM
its just r1 clutches that dog shit, dont know how any one can say suzukis have good gear boxes, for every other make bike i have done two suzuki`s. My racing buddy has a k5 1000 and he`s had two third gears.
the early suzuki`s were very bad. But all bikes have there bad points.
Title: Re: GSXR1000 K4 Clutch Problem!!
Post by: davemfox on August 16, 2008, 10:47:39 AM
Quote from: r1ninja on August 16, 2008, 09:23:21 AM
Suzukis have for years had the sweetest gearboxes in motorcycling

Thanks Andy  :icon_thumright:

Dave
Title: Re: GSXR1000 K4 Clutch Problem!!
Post by: nuddy on August 21, 2008, 09:00:48 PM

Latest Update!!

Last night we fitted a new clutch assembly, as the bike is a tuned track/road bike we dicided to install a Barnett Race clutch and springs, all went as planned ( a bit worried about all the blue instant gasket everywhere )

The engine oil was replaced with Motul 5100 semi synthetic and not fully synthetic to reduce the risk of clutch slippage

Unfortunatley the weather was crap so the test ride was reduced to a couple of laps around the block in the pouring ran, everything is working fine so far, but the bike needs a proper test ride  :headbang:

Today the weather was superb, sorted an early finish from work and took the bike out !!

No problems everything is working fine, the bike pulls like a train with no clutch slippage

The big test will be Saturday at Donnington

Title: Re: GSXR1000 K4 Clutch Problem!!
Post by: Andy J on August 21, 2008, 09:28:08 PM
nice one fella, when you assembly do you mean all plates and springs then   :icon_scratch:  i.e. the metals and 'cork'
Title: Re: GSXR1000 K4 Clutch Problem!!
Post by: nuddy on August 22, 2008, 09:01:16 PM

Yes mate , all plates and springs  :icon_thumright:

The bike is now loaded in the van ready, 'fingers crossed' as its my spanner work  :shock:
Title: Re: GSXR1000 K4 Clutch Problem!!
Post by: nuddy on August 24, 2008, 11:05:57 AM

The bike ran like a dream at Donnington yesterday, sorted  :icon_thumleft: :icon_thumleft:

Title: Re: GSXR1000 K4 Clutch Problem!!
Post by: davemfox on August 24, 2008, 12:09:08 PM
That's brill mate  :icon_thumright: have a pony

Dave
Title: Re: GSXR1000 K4 Clutch Problem!!
Post by: Andy J on August 24, 2008, 02:51:02 PM
Yeeeeeeeeeeeee Haaaaaaaaaaaaaaa  a result  +bhp from me too, good to hear it's all sorted  :icon_thumright:
Title: Re: GSXR1000 K4 Clutch Problem!!
Post by: davemfox on November 02, 2008, 12:09:44 PM
Quote from: nuddy on August 24, 2008, 11:05:57 AM

The bike ran like a dream at Donnington yesterday, sorted  :icon_thumleft: :icon_thumleft:



Is it still running ok??

Dave