Finally I now have all the pieces together to start winter rebuild:
New Bodywork:
(http://i136.photobucket.com/albums/q171/horse_ZX10R/New%20Kevlar%20bodywork.jpg) (http://s136.photobucket.com/user/horse_ZX10R/media/New%20Kevlar%20bodywork.jpg.html)
New Headers:
(http://i136.photobucket.com/albums/q171/horse_ZX10R/IMG_2851.jpg) (http://s136.photobucket.com/user/horse_ZX10R/media/IMG_2851.jpg.html)
(http://i136.photobucket.com/albums/q171/horse_ZX10R/IMG_2848.jpg) (http://s136.photobucket.com/user/horse_ZX10R/media/IMG_2848.jpg.html)
(http://i136.photobucket.com/albums/q171/horse_ZX10R/IMG_2850.jpg) (http://s136.photobucket.com/user/horse_ZX10R/media/IMG_2850.jpg.html)
And finally collect ex-Hawk BSB engine yesterday:
(http://i136.photobucket.com/albums/q171/horse_ZX10R/IMG_3272.jpg) (http://s136.photobucket.com/user/horse_ZX10R/media/IMG_3272.jpg.html)
(http://i136.photobucket.com/albums/q171/horse_ZX10R/IMG_3269.jpg) (http://s136.photobucket.com/user/horse_ZX10R/media/IMG_3269.jpg.html)
(http://i136.photobucket.com/albums/q171/horse_ZX10R/IMG_3271.jpg) (http://s136.photobucket.com/user/horse_ZX10R/media/IMG_3271.jpg.html)
(http://i136.photobucket.com/albums/q171/horse_ZX10R/QB%20Carbon%20box1.jpg) (http://s136.photobucket.com/user/horse_ZX10R/media/QB%20Carbon%20box1.jpg.html)
So now starts all the fun, aim to be back on road in April after flashing ECU and setting up engine.
Nice one mate :headbang: have a dobbin
Dave
Cheers Dave, think we need to try again and arrange a forum meet up this summer!
Lots of fun ahead rebuilding that! What paint are you going for?
Fancy doing a joint dyno session? Will be similar maps, mine has the same airbox this year. Just need to find a stock ecu for the remap.
Think I'm just going to run it naked at the start and see if it grows on me.............
Nice too its under way mate :icon_thumright: Iv got the same stacks as you got :-P
Have you got any data on the airboxes?
I'm running OEM but recently acquired the box which takes the throttle bodies.
The idea was to get a greater volume of air into the airbox at high speed to increase peak power.
Whilst at 120+mph they do this - the overall pressure (which is what they wanted to increase) didn't change - well not until the filled the frame rails with expanding foam. Kawasaki make the frame open for a couple of reasons - the first is obviously weight, second is ease of manufacture, thirdly the route to the airbox is through the frame - it doesn't matter what you do with the airbox - if you don't make the route from the front to the stacks a sealed system then you will never increase the pressure beyond a certain point. Vivaldi ended up filling the frame rails. MSS, Hawk and PSG-1 didn't and made as much bhp but more importantly more torque. What they did do was change the internal structure of the airbox slightly rather than removing the lid and using the tank as the lid (which they found never sealed properly due to the anti-vibration rubbers, removing them made the alloy tanks crack).
Hawk and PSG-1 made a two piece carbon airbox with a quick release top. This kept the pressure the same and increased airspeed into the throttle bodies. It also used the standard air filter shape so race versions were easily available rather than having to make one off's.
They look good but give Rob a call at RJS and ask him just how much work it REALLY takes to get one working anywhere near properly. Kit ECU, sensors, brackets, etc that unless you happen to have access to a complete Vivaldi bike is basically guesswork nowadays. There aren't any diagrams, parts fische, etc.
They made it up as they went along testing, racing then binned them afterwards and went to Suzuki!!
I did have 3 full bikes in my possession at one point and about Ã,£500k of parts and even then all 3 bikes were different despite coming straight from Vivaldi!!
They're a talking point to have - just don't expect BSB spec power on the road - or decent throttle response either for that matter.
Very interesting read! Added some bhp, cheers! Mine uses the tank to seal. I did look at the way the air has to flow through the intake, it looks like there's improvements to be made by smoothing off the strengthening webs at the front of the intake and then forcing all air into the airbox instead of down the frame
Cheers for that, the reason I asked for any data is that I can include it in my studies (motorcycle engineering). So rather than bolting items on and rolling with "well Jim said it gives 5bhp" we have to test and verify everything or it might as well go in the bin.
Quote from: Matt83 on February 16, 2016, 01:55:03 PM
Very interesting read! Added some bhp, cheers! Mine uses the tank to seal. I did look at the way the air has to flow through the intake, it looks like there's improvements to be made by smoothing off the strengthening webs at the front of the intake and then forcing all air into the airbox instead of down the frame
They all used an alloy front tube/clock mount - the OE snaps too easily.
You can replicas from Oz online or AP Metalcraft will make you one - they made the originals and the
three types of tanks they used!
I still have the PSG-1 large capacity tank and carbon airbox here that they trialled at the end and then used on the 06/07 bikes.
Thanks for those details, just from a quick search I've found some useful content.
Can you send me some pictures of those parts you mentioned please?
Which parts?
Don't suppose you've got one of those fuel tanks for sale?
Engine and air box in:
(http://i136.photobucket.com/albums/q171/horse_ZX10R/D6D0BC70-D919-4C84-B1EE-2EE060A0CDA6.jpg) (http://s136.photobucket.com/user/horse_ZX10R/media/D6D0BC70-D919-4C84-B1EE-2EE060A0CDA6.jpg.html)
(http://i136.photobucket.com/albums/q171/horse_ZX10R/18131B56-28A6-4FD3-907D-84434F09A515.jpg) (http://s136.photobucket.com/user/horse_ZX10R/media/18131B56-28A6-4FD3-907D-84434F09A515.jpg.html)
Nice to see it coming together :icon_thumleft:
Treat it to some new grips :-P
Quote from: Matt83 on March 03, 2016, 11:18:40 PM
Treat it to some new grips :-P
Will do, left over crash damage!
The rebuild continues, so engine is in and finally running. One small problem starts and runs fine but then starts to tighten up. So switch off and slightly panic as engine has been sat for years as a spare. Now on collection off engine and seeing that it was an ex-BSB engine it had no generator or starter motor. So had to strip these parts off my old engine and put on new. Now after chatting to a few people it was suggested to me that maybe the oil feed to the generator may off been blocked off to maintain a good oil pressure.
So had to start somewhere, and how lucky was I, on stripping down we discovered a grub screw tapped into oil feed line for generator(see pic)
Lack off oil to generator was overheating it.
(http://i136.photobucket.com/albums/q171/horse_ZX10R/BF8253DB-4196-4B81-84AF-E6FA36E459BF.jpg) (http://s136.photobucket.com/user/horse_ZX10R/media/BF8253DB-4196-4B81-84AF-E6FA36E459BF.jpg.html)
Sorry about quality, but you get the idea.......
So now rebuilt and running sweet all that is left now is to flash ecu and put on new bodywork oh and get front wheel checked and straightened if needed.
Hopefully back in road for 1st April after Racefit make my new exhaust to match headers 😋
That's interesting, do you also have a race head gasket as it has s restricted oil passageway to the head, so in race conditions oil pressure is increased in the crank shaft but oil volume is reduced in the valve gear, which isn't a problem at race type engine revs but in street riding particularly stop start traffic oil is scarcer on the cams which can cause problems, if it didn't then OE gaskets would also have smaller oil passageway.
Quote from: michael4012 on March 08, 2016, 02:48:50 PM
That's interesting, do you also have a race head gasket as it has s restricted oil passageway to the head, so in race conditions oil pressure is increased in the crank shaft but oil volume is reduced in the valve gear, which isn't a problem at race type engine revs but in street riding particularly stop start traffic oil is scarcer on the cams which can cause problems, if it didn't then OE gaskets would also have smaller oil passageway.
Don't know but will ask the question and address it if necessary, cheers for the heads up.
I remember you telling me that it had been rebuilt so maybe they haven't put a kit gasket back in just a thought :icon_thumright: