Yeah I know I had the blade all of 5mins, but it just didn't fit, so I sold it and bought a road bike to convert to track myself,
So here is what I picked up on Friday
Shes just been run in, and in mint condition, a perfect candidate for a race bike.
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/006_zpsa60067b8.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/006_zpsa60067b8.jpg.html)
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/005_zpsa83175b1.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/005_zpsa83175b1.jpg.html)
I spent Saturday taking all the road kit off the bike, boxed it all up so it doesn't get damaged.
then did a list of all the parts i'm gonna need/ want etc.
1st job,
re route the rectifier cables so that they reach the new bracket by the water pump, there are 2 ways of doing this, the easiest option is to lengthen the cable, but rather than cutting cables and soldering them, my self and Allan split the cables out of the main loom and re routed then under the throttle bodies.
this was probably the hardest job to and seemed to take ages to do
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/007_zps6edd1d9e.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/007_zps6edd1d9e.jpg.html)
Now we have the airbox off, before putting it back on, it made sense to do all the small wiring mods and cable routing etc.
so next step was the pair valve removal as this wont be needed for a race bike
So first of, remove the sensor and hoses from the ram air tube
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/003_zps531d0335.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/003_zps531d0335.jpg.html)
Now that is out, it makes for a perfect place to relocate the fuse box rather than inside the fairing.
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/006_zpse4852a17.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/006_zpse4852a17.jpg.html)
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/007_zps9fb3e855.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/007_zps9fb3e855.jpg.html)
Inside the ram air tube is a large valve that works with the pair valve, as this is no longer needed, that came out too to help get more air into the airbox
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/004_zpsdeefe8cc.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/004_zpsdeefe8cc.jpg.html)
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/005_zps405109d3.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/005_zps405109d3.jpg.html)
Next up
Pair valve, again, only there for emissions, and needs to blanked for Dyno work anyway, so ordered some blanking plates and a resistor so we don't get any fault lights, blanked off the vacuum hose to the throttle bodies as this is now redundant
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/001_zps10d7be9b.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/001_zps10d7be9b.jpg.html)
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/002_zps2dc31489.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/002_zps2dc31489.jpg.html)
picked some more parts today that also need to be fitted before the airbox can be fitted back on, and waiting for some other bits in the post.
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/008_zps755e0164.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/008_zps755e0164.jpg.html)
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/010_zpsb8b52dd9.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/010_zpsb8b52dd9.jpg.html)
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/009_zps45df5091.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/009_zps45df5091.jpg.html)
Before i can fit the Bazzaz unit, it makes sense to make some room in the battery tray for it,
So, out with the exhaust servo, and then fit a servo buddy so no nasty warning lights appear
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/012_zps8d945473.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/012_zps8d945473.jpg.html)
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/014_zps873bff15.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/014_zps873bff15.jpg.html)
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/013_zps455134a4.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/013_zps455134a4.jpg.html)
Nice work so far Lee.
Loving this, keep it up! :hello2:
will do chaps, just waiting for some more parts in the post.
and off to get some new lights for the shed so the pics are clearer
Update chaps
Only at little bit done today, as I'm still waiting on parts,
so cracked on with the wiring for the switch gear
as said earlier in the post, after thinking about it, id didn't see the point in having a bike with proper traction cntrll and deleting the switch, so I bought an STM switch for the traction and power.
then located the wires that connect direct in to the loom, cut the plug off, and then soldered the wires together and re sleeved them, so that it can just be plugged straight in
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/001_zps9aaf9100.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/001_zps9aaf9100.jpg.html)
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/002_zps6b56faef.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/002_zps6b56faef.jpg.html).
Then, me being as OCD as I am, I didn't like the switch not matching the starter switch, so bought another one for that too. so wired that in exactly the same as the TC/power switch, only this time I have left a short section of the Break light wires in place should they need to be re connected.
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/003_zps06b17958.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/003_zps06b17958.jpg.html)
now both wired in and sleeved, they can be mounted on the left hand bar , as my thumb throttle fouls the starter switch until I get the new clip ons with longer tubes
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/005_zps3d0e37c2.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/005_zps3d0e37c2.jpg.html)
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/004_zpseb104020.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/004_zpseb104020.jpg.html)
Quote from: LeeV on October 02, 2013, 03:40:37 PMas my thumb throttle fouls the starter switch until I get the new clip ons with longer tubes
A thumb throttle? Like on a jet ski?
Quote from: Kaos Theory on October 03, 2013, 10:29:29 AM
Quote from: LeeV on October 02, 2013, 03:40:37 PMas my thumb throttle fouls the starter switch until I get the new clip ons with longer tubes
A thumb throttle? Like on a jet ski?
yeah dude, or quad bike
Looking good so far mate, :lol:
Good choice of bike, in my opinion better than the blade.
Are you leaving the engine standard on this newer model?
Your old engine is going strong in mine.
Safe riding and happy building.
Thanks Brett
Gonna leave the engine stock on this for now, I may do some head work next year to get a bit more torque, but power is useless without a good set up, so gonna be sorting that first.#
that engine you have is a proper peach you have, how did you get on with the dyno work?
Lee,
I had a rite mare with the dyno.
I had it dyno,d with my decatted standard downpipes, link pipe and Leo vince gp pro can and it was only hitting 170s at the rear wheel, the reason for this was the exhaust wasn't allowing it to flow freely so therefore choking it. I also had an overfuel at 3k rpm which we thought was down to the exhaust restriction.
I then sourced a nice Leo vince full titanium system ex Tom Sykes from slingshot racing (similar to the one you had, different downpipe shape). It then went back on the dyno and had a massive overfuel at 6k. All the sensors were then checked to ensure they were within their operating range, which they were. It was then found that it was the firmware on the power commander but all sorted now so hopefully I,ll be pushing good figures now. It does feel a good strong engine though so very pleased, thanks.
sweet, that did sound like a hassle, bet you were worried for a while.
had some parts arrive last night so I can finish off all the bits under the airbox then carry on with the bazzaz and shifter
A little bit more done.
The pair valve resistor, blanking plates, air filter arrived in the post, so I could finish off with all the other bits under the airbox and then re install that.
So 1st up, fit the blanking plates and resistor
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/006_zpsb3526fa0.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/006_zpsb3526fa0.jpg.html)
then block off the airbox with a nice cap,
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/011_zpsa7be8c32.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/011_zpsa7be8c32.jpg.html)
next up
fit the HM shifer, and bazzaz loom
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/009_zps3e87697c.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/009_zps3e87697c.jpg.html)
This is pretty easy to do, bit still took my time doing it so it was as neat as possible, 1 of my pet hates is untidy wiring... a tidy bike = a tidy mind.
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/010_zps517ee6d3.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/010_zps517ee6d3.jpg.html)
On the top of the airbox, the injectors are neatly fitted, but to keep them nice and tidy, I drilled some small holes on the tabs for the loom so they can be cable tied in place, (not too tight tho, just enough to hold them in place)
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/013_zps67a001cd.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/013_zps67a001cd.jpg.html)
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/015_zps61803797.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/015_zps61803797.jpg.html)
Now that's fitted, run the remaining part of the looms alongside the oem loom, and tie into place.
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/017_zpsf6bdfda7.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/017_zpsf6bdfda7.jpg.html)
Now, you remember when I removed the exhaust servo?
there are 2 lugs on the undertray that hold it in place, cut them off, flush with the tray, and then the bazzaz unit fits perfectly in its place
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/016_zps62aa98f2.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/016_zps62aa98f2.jpg.html)
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/018_zpsec7e0e28.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/018_zpsec7e0e28.jpg.html).
More parts are coming in the post.
got a great deal on a K-tech dds shock, and some other parts that i'll need for the build.
so keep watching chaps
:glasses9: love it mate. 10 out of 10
Quality job Lee :headbang:
I'm lovin this thread. Wish I had your confidence...fitting those levers I got from you is about the extent of my bravery.
Great job lad, keep it up!
Thanks chaps,
had some shiny bits arrive in the post today!!
More to come
BLING!
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/002_zps6a54e37a.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/002_zps6a54e37a.jpg.html)
Oh yes now your talking, :headbang:
Sweet potato pie ... with extraaaa syrup !!!!
Hi again chaps
had some parts arrive this week so going to crack on over the weekend
After doing some research into what exhaust works best, and best value for money etc, I decided in the end to follow the advice of some people in the know and not to just go with what has a nice sticker.
So the stock headers are now off the bike and on the way to MHP to be balanced, and matched upto to one of his Ti link pipes and silencers.
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/009_zps16bd0f43.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/009_zps16bd0f43.jpg.html)
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/008_zps2cee374c.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/008_zps2cee374c.jpg.html)
When they arrive back with me i'll post some pics of what has been done to them,
In the meantime, as the headers are off, I may aswell give the engine a little clean and fit the new rad hoses that sit behind the headers as its its a little tight for working space.
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/002_zps0de2334f.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/002_zps0de2334f.jpg.html)
and before you all say it, I didn't want green!
Should have gone for red lol
Quote from: LeeV on October 11, 2013, 04:50:37 PM
Quote from: Chappo on October 11, 2013, 04:17:10 PM
Should have gone for red lol
I love a bit of red against black n green,
Bikes coming along nicely anyway.
thanks dude
it will have red in the paint job
What a great job man. I love following the updates.... after your done I'll give you lots of money and you can do mine lol :headbang:
anytime dude, I love building the bikes just as much as riding.
Not got much done today.
Finished cleaning the engine, TBH it wasn't that dirty, it just had some road film and the odd bit of chain lube around the sprockets, and around the swingarm and shock linkage.
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/013_zps8e81e848.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/013_zps8e81e848.jpg.html)
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/012_zps1fd31f52.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/012_zps1fd31f52.jpg.html)
Next up, removed the oem shock, the difference between the 2 is night and day and shows just how much work k-tech put into their design and quality
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/006_zps622a1add.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/006_zps622a1add.jpg.html)
So now the old shock is out, all the linkages, swingarm, pivots etc have been cleaned and re fitted
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/004_zpscb97e614.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/004_zpscb97e614.jpg.html)
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/005_zps2b270c96.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/005_zps2b270c96.jpg.html)
Fitting the new shock is a complete doddle, as are most, but due to the way the shock is mounted there is nothing in way.
I've left the ride height as it is until I know what I should be setting it too, and even then its only a case of lifting the tank the adjust the ride height.
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/008_zps3a99d293.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/008_zps3a99d293.jpg.html)
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/009_zps92c408bd.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/009_zps92c408bd.jpg.html)
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/011_zps126603c4.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/011_zps126603c4.jpg.html)
Gonna get some more bits done on Monday, so will report back then
Thanks again for the comments and interest
That does look sick sitting tucked away in there, lol :occasion14:
Hey Lee, It just gets better and better :hello2:
Thanks Tim
just waiting on the exhaust system to arrive, then I can finish off the hoses, mount the headers, rad back on etc..
then after that, its move onto the front end, forks, clip ons, levers, brakes etc
Little update chaps.
the work on the the bike came to a little standstill as I was waiting on some parts, but now the project has taken a an unexpected turn, so the bike is now off to a secret location to have some specially developed parts made for it.
so while the bike is out of the garage, i've decided to take the opportunity to crack on with the bodywork.
so lets have your best ideas for a paint scheme please chaps.
My favourite atm is the Quattro plant, but with a twist in the colours just to make it a more my idea rather than just another rep.
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/quattroplant-web_zps9cb3b74a.png) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/quattroplant-web_zps9cb3b74a.png.html)
or these
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/Kawasaki-Racing-ZX-10R-WSBK-Headlight-8_zpsffd40f45.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/Kawasaki-Racing-ZX-10R-WSBK-Headlight-8_zpsffd40f45.jpg.html)
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/MSS-Bathams-Kawasaki_zps5ab81f9c.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/MSS-Bathams-Kawasaki_zps5ab81f9c.jpg.html)
First one, all day long. :headbang:
And, just to be awkward I prefer No2.
I like the solid Black Tank look in the second snap compared to the Green plastic strip that sits between the tank and frame in shot No1.
Enjoy :lol:
haha, thanks guys,
these are only ideas, as the end result will be a little different anyway, I rekon both need a little red in there somewhere
How about the Bolliger World Endurance Team colours??
http://www.bolligerteam.ch/Team_Bolliger_Switzerland/Fotos/Seiten/24h_Le_Mans_2013.html#1 (http://www.bolligerteam.ch/Team_Bolliger_Switzerland/Fotos/Seiten/24h_Le_Mans_2013.html#1)
Dave
Yes I prefere no 2 also, but like you say it needs some red in it somewhere :headbang:
Quote from: davemfox on October 24, 2013, 10:29:17 AM
How about the Bolliger World Endurance Team colours??
http://www.bolligerteam.ch/Team_Bolliger_Switzerland/Fotos/Seiten/24h_Le_Mans_2013.html#1 (http://www.bolligerteam.ch/Team_Bolliger_Switzerland/Fotos/Seiten/24h_Le_Mans_2013.html#1)
Dave
good find, but not quite what i'm looking for chap.
its just as much about the design and layout of colour that i'm looking for,,,, keep em coming
forgot to add this part up chaps
Race shift pattern conversion.
the standard shift linkage doesn't allow this to work without fouling the frame on most aftermarket rearsets.
so I spoke to a couple of guys and found that Lightech make an aftermarket part for this, available from HM racing for £25.
The part is angled so that it clears the frame without fouling on the gear lever, and also allows the sprocket cover to be fitted back on.
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/001_zpsfff9803b.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/001_zpsfff9803b.jpg.html)
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/002_zps6049b08a.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/002_zps6049b08a.jpg.html)
Then you need a 6mm x 1.0 rose joint to fix to the side of it
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/003_zps0f1570d0.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/003_zps0f1570d0.jpg.html)
Then HEY PRESTO!!!
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/004_zps57ccf6ed.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/004_zps57ccf6ed.jpg.html)
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/005_zpsaf7181a6.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/005_zpsaf7181a6.jpg.html)
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/006_zps26cd7711.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/006_zps26cd7711.jpg.html)
Quote from: LeeV on October 25, 2013, 10:58:06 AM
Race shift pattern conversion.
the standard shift linkage doesn't allow this to work without fouling the frame on most aftermarket rearsets.
so I spoke to a couple of guys and found that Lightech make an aftermarket part for this, available from HM racing for £25.
The part is angled so that it clears the frame without fouling on the gear lever, and also allows the sprocket cover to be fitted back on.
(http://static.fjcdn.com/comments/4209016+_9dff3e935d12cde82265043c58683987.jpg)
Tell me please, is the Lightech part in steel, or is it ally?
Thanks,
Brian
its Ally matey ;-)
Good to hear, thanks muchly :hello2:
Cheers,
Brian
Right chaps
as I said a few weeks ago, the bike was off to have some parts made for it,
well the parts to be exact was the exhaust system from Mark at MHP, he's been working on a modified version of his own upgraded stock headers, playing around with different secondary lengths, and link pipes etc to gain torque in the midrange
to start the ball rolling we fitted a completely stock set of headers, linked up with his Link pipe and silencer so we could see the difference.
This a completely stock engine with a K7n filter and a bazzaz
the result was shocking to say the least
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/DSC_0105_zps2d2ff625.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/DSC_0105_zps2d2ff625.jpg.html)
Now i'm not going to get too excited at the power figure as I know that dyno figures can be misleading. but it definitely a good start to say the least.
I'll post up some more details of the modified headers later when we get some more results
Holy Crap !!! :shock: There's some power in them there 11+ bikes !
That does seem high tbh,
My bike made 186.9 on the Dyno with Akra can and link pipe, I was quite happy with those figures :lol:
All Dyno,s are different we know that, still a good result tho Lee, :headbang:
cheers matey, I know it not a realistic figure, and we are not finished with the system yet.
the main objective is to cure the flat spot that you can see between 6-8k rpm.
we have been testing some different configurations and think we have found some thing that cures it. the results will be clearer on the next dyno run
A bit more testing done now chaps.
we tested the same header set up, but added different lengths to the secondary lengths and link pipe
we've now cleaned the torque curve up, and its filled the void between 6k and 8K where the power and torque dropped off with the standard set up.
So now when it hits 6K it progresses much better into the curve rather than loosing it.
I have the dyno sheets in PDF Format but I don't have the software to change them into a different file type to upload.
Also the dyno was set on a DIN correction and we changed that to SAE to see if the figures would drop much, but they didn't.
In the last test we just touched 206BHP, and when we changed that to SAE correction, it still hit 201. and 86 ft lb torque
Quote from: LeeV on November 07, 2013, 06:50:12 AM
A bit more testing done now chaps.
we tested the same header set up, but added different lengths to the secondary lengths and link pipe
we've now cleaned the torque curve up, and its filled the void between 6k and 8K where the power and torque dropped off with the standard set up.
So now when it hits 6K it progresses much better into the curve rather than loosing it.
I have the dyno sheets in PDF Format but I don't have the software to change them into a different file type to upload.
Also the dyno was set on a DIN correction and we changed that to SAE to see if the figures would drop much, but they didn't.
In the last test we just touched 206BHP, and when we changed that to SAE correction, it still hit 201. and 86 ft lb torque
Sounds good Lee, Is that on a stock motor?
yes matey, sure is a stocker
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/kawaskizx10rcameintobestcurve_zps9a75f3ab.png) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/kawaskizx10rcameintobestcurve_zps9a75f3ab.png.html)
That's cool Lee. Mine made 198.4 on a Dynojet 250i Dyno with about 1000 miles on it.
Bloody good figures that.
I'm getting a bit of a flaming from a few people about the figures, but as I said before, I know they can be misleading, but I can only put up what the dyno says, if I said it hit 200bhp and had no proof I would be a liar, cant bloody win either way :icon_scratch:
Quote from: LeeV on November 07, 2013, 02:05:07 PM
Bloody good figures that.
I'm getting a bit of a flaming from a few people about the figures, but as I said before, I know they can be misleading, but I can only put up what the dyno says, if I said it hit 200bhp and had no proof I would be a liar, cant bloody win either way :icon_scratch:
I agree Lee, Iv'e always said you could put it on ten different Dyno's and get ten different readings, it's a tool and obviously useful when your doing the kind of work that your doing, and as said you can only post what you get on the day. Good luck with it mate, I'll be interested to see how it develops :)
Quote from: LeeV on November 07, 2013, 02:05:07 PM
Bloody good figures that.
I'm getting a bit of a flaming from a few people about the figures, but as I said before, I know they can be misleading, but I can only put up what the dyno says, if I said it hit 200bhp and had no proof I would be a liar, cant bloody win either way :icon_scratch:
The key thing is before and after on the same dyno ....
that's what we are doing chap.
when the system is completed and a final map done i'll show the graphs, I just thought it would be of interest showing each stage as we go
Quote from: LeeV on November 07, 2013, 05:14:15 PM
that's what we are doing chap.
when the system is completed and a final map done i'll show the graphs, I just thought it would be of interest showing each stage as we go
I was referring to people rubbishing the numbers .. absolutes are nothing platform to platform but comparisons on the same dyno are valid :-)
I get ya,
Cheers dude
What Mark said - use the same dyno for your development shows where you are gaining doing your mods.
Dave
Quote from: davemfox on November 07, 2013, 11:07:03 PM
What Mark said - use the same dyno for your development shows where you are gaining doing your mods.
Dave
:icon_thumright:
Superbike fairings are here!!!
I got these from Mike @ racesparesuk, great quality as always
So while the exhaust and mapping is being taken care of elsewhere it gives me some room to get cracking with the paint scheme
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/137_zps3dc0a573.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/137_zps3dc0a573.jpg.html)
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/138_zps1f18c2fe.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/138_zps1f18c2fe.jpg.html)
as you can see in the pic, there are loads of swage lines in the panel, so will make it easier to separate the colours.
Little update chaps.
Mark finished testing the final part of the system yesterday at MSS Kawasaki, and compared his modified headers and link piper to a full race Arrow system, the results show that the Arrow makes more power below 5500 rpm but after that His system makes more midrange power right through to 9500 rpm where it then is pretty much identical up until the top of the rev range.
Now the system is ready for final fabrication, so I'm taking all the body work up on Monday for a test fitting to make sure the headers and link pipe don't foul the belly pan on exit, and to check how the silencer sits in line with the seat unit.
Then a final sound test with a new silencer he is working on.
I've not yet started the paint work as I need the bike to test fit the panels and to make sure the paint scheme I have in mind will actually work.
I'm pretty sure on the design I want now and have had the paint mixed so its just a case of putting paint on the panels
Sorry its been s long since the last update chaps, I've been flat out busy with work commitments and sorting out the new workshop and spray booth for a new business venture next year.
The exhaust system is now finished and ready for me to collect.
Mark has done a fantastic job with this, he made 3 different silencer lengths to test the DB level, 350mm, 380mm and 420mm the one pictured below is a 380mm silencer and works at about 102db without a baffle.
The headers have been modified to give more midrange from 6k to 9k, we tested these on the same dyno at MSS with a full arrow system and he's managed to pretty much match the performance and torque of the full system.
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/1467385_514522518645315_807177595_n_zps9806c0ea.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/1467385_514522518645315_807177595_n_zps9806c0ea.jpg.html)
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/1466077_514522608645306_853396948_n_zps0401ec63.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/1466077_514522608645306_853396948_n_zps0401ec63.jpg.html)
(http://i977.photobucket.com/albums/ae254/leeV1000/zx10r%202011/1441388_514522578645309_1562974396_n_zpsa78c130a.jpg) (http://s977.photobucket.com/user/leeV1000/media/zx10r%202011/1441388_514522578645309_1562974396_n_zpsa78c130a.jpg.html)
So next the bike will be going to HM racing for the full mapping to be done, K-tech front for cartridges and set up and that will be it till the new year when I can carry on with the bolt on parts that i'm waiting for then do the paint work in the new booth.
Thanks for the interest in the project chaps
[:)]
Spot on that Lee!
What paint job did U finally settle on?
ah, well I've taken ideas from loads of different race reps to make my own, but as the bike has been with Mark for 2 months, I've not had any chance to start it yet.
so you'll have to wait and see after xmas when I move into my new unit
(http://www.jonrb.com/emoticons/popcorn3.gif)
lol
I think this is going to be one of those bikes that should be re designated as PORN [rofl] [rofl] [rofl] [rofl] [rofl]
Any updates mate??