Hi guys,
I know I don't post much here, but this seems like the best place to post my winter shed story up.
I've had my '05 Ten from new and have never done much to it bar feed it go go juice and ride it. She's done one full winter, a full season of track days only and had got to nearly 14000 miles at the end of last season. There were a few things starting to grate by that point, a tiny knock from the steering head bearings and tinkly top end noises to name but two. The final straw for me came one day when out with two friends, one on a Multistrada and the other on an ancient RD500. We were accellerating out of a roundabout on an uphill section which is very bumpy. Much to my chagrin, I could barely keep up with either of them, my bike being far too busy alternately wheelspinning, wheelying and shaking its head to worry about simply going forward. There and then I decided that a decent rear shock at least was a must, and started making plans for a major strip down and service this winter.
I started out by acquiring a second hand Ohlins rear shock from a friend, he stupidly thinks a Fireblade will be better and was selling the bling off his Ten. Next up I stumbled upon a pair of '06 forks with full Ohlins internals. I couldn't pass them up at the price and got both forks and shock for £700.
I waited until the end of January to start work and quickly got things stripped apart. I took all the rear suspension linkages apart to clean and regrease them (one was seized), cleaned everything up and fitted the new shock. In the course of reassembling, I fitted a bunch of new bits to the rear brake system to make it look nicer - Venhill hose, Tasty Nuts and HRC reservoir hose. All pretty easy stuff to be fair. I then stripped nearly everything off the engine in order to change the spark plugs and check the valve clearances. Unfortunately they were out of limits, so off the bike went to Gary Vardy in Swindon for some fettling. He did a bang up job and charged very little, I highly recommend his services should you require them ;-)
When I got the Ninja home I set about putting all the gubbins back on the engine, new plugs went in fine and the throttle bodies were a lot easier than I thought they might be. I took the opportunity of easy access to replace my throttle cables as I had slightly nicked one of them while modifying them for a Q/A throttle insert last year. The mod is a lot easier to do on the bench, and looks a lot neater too.
In the mean time E bay had supplied me with a bargain PCIII and this was wired in once the throttle bodies were done. I cleaned my original headers up and refitted those with new gasket thingies and put the rad back on, I even managed to plug all the wires back together and find somewhere for all the hoses that had been dangling!
While the rear bodywork was off I had glued the rear light supports back in, and I also fitted a new rear light as mine had got bits of leaves and muck inside it from the alarm hole that the dealer had drilled in it from new. Once my engine was all back together I put that back on, along with the airbox and a lovely carbon Akrapovic can. Things were starting to look nice by this time, but I was keen to get it outside to do the fluids and see if it would run again :lol:
I got my wish the very next day with some decent weather, so I pushed the bike outside to do the oil change and put fresh coolant in. I know you can do both of these jobs indoors, but I always seem to make a mess!
Neither of those are long jobs, so in short time I found myself refitting the K&N, airbox lid and tank ready to start the beast. I was pretty nervous as to whether I had got everything dead right, you know how it is, so was mega pleased when she fired within three turns of the starter - you little beauty!
I let it get nice and hot to burn off all the excess WD40 and ACF that was in every conceivable nook and cranny, but was now stuck as I was still waiting for the adapter collar to fit the new front end.
Another week passed and I got my collar, beautifully turned in Aluminum by the blokes in the workshop at work. First things first, after the seizage and general lack of grease in the rear suspension, I stripped the forks out and removed the yokes. Sure enough the lower head bearing was virtually devoid of grease. Luckily, the bearings and races hadn't rusted yet, so cleaning and new grease sufficed. With that done, I had the new forks in in a jiffy and was finally able to refit the fairing, feeling that I was nearly there. I got my Brembo M/C back from servicing yesterday which I obviously wasted no time in fitting and getting the brakes bled up. I managed to find an MOT station locally with some space and she passed with flying colours.
(http://pic20.picturetrail.com/VOL1275/4339047/9249512/384916064.jpg)
Today was spent finally cleaning and tweaking at things. There are one or two niggles that I still need to deal with, like the untidy and annoying brake line routing at the lever (I have one of those adapters on the way), and I'll need to check and adjust the sag etc on the new suspension to suit me. I also have a Dynojet Q/S to fit once I have got a shift rod for it. But from my short ride yesterday I can already see that things are better, and I honestly think the bike looks the best it has since I've had it :sunny:
There is an album with step by step (nearly) pics on my facebook account - http://www.facebook.com/album.php?aid=144851&id=686988256
Enjoy!
Jen.
thanks for sharing :icon_thumright:
Good work :icon_thumright: :icon_thumright:
have a bhp for your efforts
good work indeed and a very good story book with pics via facebook........... :icon_thumright:
a BHP well done fellette...............woops im so sorry, now ill have to give you another one.............BHP that is.......
Thanks guys, but it's 'fellette' if you please ;-)
Jen.
Thought the words made more sense than the usual ......:tongue3:
Nice one
nice one looks like a good clean 10 you got ther :icon_thumright:
Looks great mate, Think the 1st GEN always looks better.
My brake line goes inside the fork leg, You might rub paint the other way.
:headbang:
Thanks guys :)
I will be re-routing that brake line to the inside imminently 711. I have one of those master cylinder adapter things coming so that I can hopefully get a bit more clearance between banjo's, fork legs and throttle cables. At the minute neither my lever or my throttle are rotated round enough, and that sort of stuff really winds me up! :emb:
Jen.
Cracking story there Jen! its a damn smart looking 10R have a BHP for your trouble :headbang:
Great job there Jen :icon_thumright: and nice read to go with it! you've inspired me to do a bit of spannering......when Ive fixed the caved in garage roof :emb:
how much fork you got sticking thru the top yoke? should be about 10mm i think thats how much longer gen 2 vs gen1 are....
Hi Tony,
There's somewhere between 10 and 15mm. I measured the length downwards to the spindle when I fitted them, so as to keep the ride height the same :)
Jen.
yeah mate when i ran 07 forks in my 05 i had 13mm above top yoke, effectively -3mm as forks 10mm longer to start with if i remember correctly....
Cracking work, just wish I had the balls to do that sort of stuff myself. Good effort, have a gee gee on me for your hard work and posting it. :icon_thumleft:
Quote from: big_gaz on April 08, 2010, 09:08:58 PM
Cracking work, just wish I had the balls to do that sort of stuff myself. Good effort, have a gee gee on me for your hard work and posting it. :icon_thumleft:
big-gaz [rofl] [rofl] [rofl] [rofl] so you wish you had balls like a girl :tongue3: