ZX 10 R Forum

Gallery => Modification Gallery => Topic started by: ZXRich on March 10, 2009, 08:41:53 PM

Title: Winter mod's finished
Post by: ZXRich on March 10, 2009, 08:41:53 PM
Spring is well on the way    :tongue3: so thought I'd better pull my finger out and finish my winter mod's.

started out with a colour change on the clocks.

(http://i107.photobucket.com/albums/m301/RIC2H/100_4392.jpg)

..followed by a rear caliper change,

(http://i107.photobucket.com/albums/m301/RIC2H/100_4270.jpg)

(http://i107.photobucket.com/albums/m301/RIC2H/100_4268.jpg)

(http://i107.photobucket.com/albums/m301/RIC2H/100_4274.jpg)

(http://i107.photobucket.com/albums/m301/RIC2H/100_4263.jpg)

and a change of wheel colour,

(http://i107.photobucket.com/albums/m301/RIC2H/Picture008.jpg)

(http://i107.photobucket.com/albums/m301/RIC2H/Picture004.jpg)

Only time will tell if the white wheels were a good idea, Im liking them at the mo  ;-)

I've also fitted a puig d/b screen and some triumph 675 mirrors for a better rear view + some new 2CT's

Rich

Title: Re: Winter mod's finished
Post by: Andy J on March 10, 2009, 08:44:50 PM
very nice indeed  :icon_thumright:
Title: Re: Winter mod's finished
Post by: zx10r bob on March 10, 2009, 08:55:29 PM
that my friend was a good winter put to good use........... :icon_thumright: :icon_thumright:

did you make your own under slung rear brake bracket looks the doggs i must say......... :icon_thumright: :icon_thumright:

have a bhp,,,,,,,,,,,,, :headbang:
Title: Re: Winter mod's finished
Post by: slapknacker on March 10, 2009, 09:10:53 PM
am liking the underslung caliper most of all :headbang:
Title: Re: Winter mod's finished
Post by: ZXRich on March 10, 2009, 09:57:45 PM
Quote from: zx10r bob on March 10, 2009, 08:55:29 PM
that my friend was a good winter put to good use........... :icon_thumright: :icon_thumright:

did you make your own under slung rear brake bracket looks the doggs i must say......... :icon_thumright: :icon_thumright:

have a bhp,,,,,,,,,,,,, :headbang:

Cheers Bob,

It took me six weeks to design and make up the bracket, this was done during lunch breaks at work and many an evening in the garage,...this drove the Mrs up the wall. I think she's more happy its finished than i am :tongue3:

The main body of the bracket is 15mm alloy plate with a steel hanger manufactured to hold the caliper. the steel hanger is held in place by four M8 c/sunk stainless bolts.
The plate you can see on the underside of the swingarm is there to stop the caliper trying to rotate under braking, this has been welded in place  and bolted from the rear for extra strength...i really hope it stays where it is  :shock:

I had a lot of headaches along the way but Im pleased with the outcome
Title: Re: Winter mod's finished
Post by: tony83 on March 10, 2009, 10:05:26 PM
Looking gooood.... Nice job on the bracket  :icon_thumleft:

Wonder where you got the idea for the white wheels from  [whistle]
Title: Re: Winter mod's finished
Post by: ZXRich on March 10, 2009, 10:10:22 PM
Quote from: tony83 on March 10, 2009, 10:05:26 PM
Looking gooood.... Nice job on the bracket  :icon_thumleft:

Wonder where you got the idea for the white wheels from  [whistle]

I can't possibly imagine!  :emb:  ;-)
Title: Re: Winter mod's finished
Post by: HammyUK on March 10, 2009, 10:30:20 PM
Nice work on the bracket. Be carefull with the stainless bolts though as you'll get a galvanic reaction against the alloy and you'll have strength issues.
Might of been better off having a larger bracket that fitted into the adjuster guide and into the oe anti-rotation bracket. Would've given you the "Works" look too.
Fair play for doing it at home though.
Title: Re: Winter mod's finished
Post by: ZXRich on March 10, 2009, 11:25:07 PM
Quote from: HammyUK on March 10, 2009, 10:30:20 PM
Nice work on the bracket. Be carefull with the stainless bolts though as you'll get a galvanic reaction against the alloy and you'll have strength issues.
Might of been better off having a larger bracket that fitted into the adjuster guide and into the oe anti-rotation bracket. Would've given you the "Works" look too.
Fair play for doing it at home though.

thanks for the advice Hammy,

the 4 x M8 bolts screw into the steel carrier so these should be ok, the M6 bolts on the rear are only for additional strengthening, My weldings  pretty good so the anti-rotation plate would hold even without these additional M6 bolts.

The 15mm alloy plate i had was not big enougth in size for me to carry out the 'works look' hanger. maybe next time  :lol:
Title: Re: Winter mod's finished
Post by: bikerchick82 on March 11, 2009, 03:20:30 AM
*bling bling*

I think that's your bike calling  [rofl]

Looking uber sexy  :love7:

You wanna swap?  [whistle]
Title: Re: Winter mod's finished
Post by: davemfox on March 11, 2009, 05:48:48 AM
That looks good mate  :icon_thumright: and I like the bracket for the rear brake  :tongue3:

Dave
Title: Re: Winter mod's finished
Post by: gary zxr400 on March 11, 2009, 05:04:04 PM
is it possible to do the colour change for the clocks on an 06 zx10r and if so how do you go about it ?
Title: Re: Winter mod's finished
Post by: ZXRich on March 11, 2009, 05:25:39 PM
Quote from: gary zxr400 on March 11, 2009, 05:04:04 PM
is it possible to do the colour change for the clocks on an 06 zx10r and if so how do you go about it ?


Not sure about the 06 clocks, Im sure someone on here can help you out or you could try contacting this bloke http://myworld.ebay.co.uk/spacehopper321 who supplied my LED kit and instructions for around a tenner.
You must have a good quality fine tipped soldering iron {18w} and a steady hand!  :icon_thumleft:
Title: Re: Winter mod's finished
Post by: HammyUK on March 11, 2009, 06:53:17 PM
Here ya go Rich (for future reference [whistle])

http://www.metals4u.co.uk/detail.asp?Cat_ID=16&Prd_ID=881
Title: Re: Winter mod's finished
Post by: ZXRich on March 11, 2009, 09:04:51 PM
Quote from: HammyUK on March 11, 2009, 06:53:17 PM
Here ya go Rich (for future reference [whistle])

http://www.metals4u.co.uk/detail.asp?Cat_ID=16&Prd_ID=881

Cheers Hammy! I have an aluminium fetish so that site is pure hardcore  :whip2:

Wanna see what i keep in my bottom drawer?

























(http://i107.photobucket.com/albums/m301/RIC2H/Picture001.jpg)
Title: Re: Winter mod's finished
Post by: J-train on March 26, 2009, 07:26:29 AM
Hmm, good on you for making your own bracket, :headbang: Brembo makes a real nice billet bracket for the 83mm calipers for the 04-05/08-09. It is pretty cheap too. (probably not as cheap as homade though)
Title: Re: Winter mod's finished
Post by: ZX10R-RACER on March 26, 2009, 09:20:44 AM
cool if anyone wants a brembo rear caliper i have one its a jonny big dick moto gp rear caliper
Title: Re: Winter mod's finished
Post by: ZXRich on March 26, 2009, 02:59:46 PM
Quote from: J-train on March 26, 2009, 07:26:29 AM
Hmm, good on you for making your own bracket, :headbang: Brembo makes a real nice billet bracket for the 83mm calipers for the 04-05/08-09. It is pretty cheap too. (probably not as cheap as homade though)

any chance of posting a link? I might be interested in one of these long term and im sure others will too  :icon_thumleft:.

Rich
Title: Re: Winter mod's finished
Post by: tony83 on March 26, 2009, 04:47:39 PM
yes brembo do make one but say its for use with aftermarket wheels only (smaller OD on hubs)

zxrich i bet there's just enough room for a rizzla between inside edge of caliper and wheel hub... its like this on the ladybird bracket i bought had to file a bit off edge on caliper (unless you lowered it slightly so pads not in full contact with swept area of disc...)
Title: Re: Winter mod's finished
Post by: ZXRich on March 26, 2009, 07:10:58 PM
Quote from: tony83 on March 26, 2009, 04:47:39 PM
yes brembo do make one but say its for use with aftermarket wheels only (smaller OD on hubs)

zxrich i bet there's just enough room for a rizzla between inside edge of caliper and wheel hub... its like this on the ladybird bracket i bought had to file a bit off edge on caliper (unless you lowered it slightly so pads not in full contact with swept area of disc...)

Yeh it was far to close a fit,
I removed the inside piston and measured the wall thickness of the casting in that area, I managed to mill away approx 3mm of casting.
This left me 2mm clearance between the caliper and the hub {wall thickness in this area is around 3mm at the thinest point}

I looked at the ladybird site but didnt know how the ferk to order one as it was all in Japanese  [rofl]

How did you go about getting yours?
Title: Re: Winter mod's finished
Post by: 10rmish on March 26, 2009, 07:39:11 PM
nice looking bike rich :icon_thumright:
Title: Re: Winter mod's finished
Post by: J-train on March 26, 2009, 07:46:39 PM
Quote from: tony83 on March 26, 2009, 04:47:39 PM
yes brembo do make one but say its for use with aftermarket wheels only (smaller OD on hubs)

zxrich i bet there's just enough room for a rizzla between inside edge of caliper and wheel hub... its like this on the ladybird bracket i bought had to file a bit off edge on caliper (unless you lowered it slightly so pads not in full contact with swept area of disc...)

Any Brembo supplier should be able to get it, I got mine from Yoyodyne in the US,  I am running PVM wheels, and I checked it with the  rear BST off my 06 and both fit. It is tight against the hub, so that is probably the clearce issue with stock wheels they are refering too, but they have been wrong before, Brembo claims it fits the 06-07 too, but they are not even close to the same, I tried it.  04-05 and 08-09  I know it fits! I don't have any stock wheels lying around to see exactly what the clearance issue is. Sorry. I have the HP caliper with it and that is a pretty sweet upgrade from the 34G, which is what I originaly had, and what the OP has.
Title: Re: Winter mod's finished
Post by: ZXRich on March 26, 2009, 08:01:18 PM
Quote from: 10rmish on March 26, 2009, 07:39:11 PM
nice looking bike rich :icon_thumright:

Cheers fellow Swindonian  :tongue3:
Title: Re: Winter mod's finished
Post by: ZXRich on March 26, 2009, 08:07:47 PM
Quote from: J-train on March 26, 2009, 07:26:29 AM
Hmm, good on you for making your own bracket, :headbang: Brembo makes a real nice billet bracket for the 83mm calipers for the 04-05/08-09. It is pretty cheap too. (probably not as cheap as homade though)

Nice looking front end in your avatar pic J-train, looking forward to you posting some more pictures!  :icon_thumright:
Title: Re: Winter mod's finished
Post by: tony83 on March 26, 2009, 09:20:38 PM
ahh hello j train you're 9r to 10 r on zx10r.net  :icon_thumleft:
Title: Re: Winter mod's finished
Post by: tony83 on March 26, 2009, 09:25:21 PM
Quote from: ZXRich on March 26, 2009, 07:10:58 PM
Quote from: tony83 on March 26, 2009, 04:47:39 PM
yes brembo do make one but say its for use with aftermarket wheels only (smaller OD on hubs)

zxrich i bet there's just enough room for a rizzla between inside edge of caliper and wheel hub... its like this on the ladybird bracket i bought had to file a bit off edge on caliper (unless you lowered it slightly so pads not in full contact with swept area of disc...)

Yeh it was far to close a fit,
I removed the inside piston and measured the wall thickness of the casting in that area, I managed to mill away approx 3mm of casting.
This left me 2mm clearance between the caliper and the hub {wall thickness in this area is around 3mm at the thinest point}

I looked at the ladybird site but didnt know how the ferk to order one as it was all in Japanese  [rofl]

How did you go about getting yours?

there was a link to a kinda poorly translated site for international orders, think it was 'spiralspinner'  something.
been to a local engineer to make a copy out of two pieces ot plate for simplified mass production, if it works our should be able to offer it to forum  members  :icon_thumleft:
Title: Re: Winter mod's finished
Post by: slapknacker on March 27, 2009, 06:57:56 PM
if you do i will be intrested aswell.

i realy like the look of a small underslung caliper. :icon_thumleft:

ouit of intrest whats the price of a brembo rear caliper and pads?
also wots the price fr the underslung hanger?

you got any pics of yours Tony?



Title: Re: Winter mod's finished
Post by: J-train on March 27, 2009, 10:57:04 PM
Quote from: slapknacker on March 27, 2009, 06:57:56 PM
if you do i will be intrested aswell.

i realy like the look of a small underslung caliper. :icon_thumleft:

ouit of intrest whats the price of a brembo rear caliper and pads?
also wots the price fr the underslung hanger?

you got any pics of yours Tony?

Excuse me for my use of $$$, cause I do not know what the exhange is, but I paid about 200$ for the Brembo Hanger, I was using a 34G (Ducati 2 piston side feed brembo) you can get them for about 50$ on ebay, I then bought the HP caliper, comes with sintered pads, I paid right at 460$ for it.  SO about 660$ total, MSRP on the whole setup is around 750$, so I got a bit of a bargin.




Title: Re: Winter mod's finished
Post by: slapknacker on March 29, 2009, 02:24:57 PM
jesus thats about £500 sterling.

hmmm, nice but think i'll get my suspension reworked first.

i'd spend £250 max on the rear brake. dont use rear brake much at all
so only for the 'bling' factor and smart looks.

then again who knows i've been thinking about the underslung brembo
since i saw the first post!!!! :lol:
Title: Re: Winter mod's finished
Post by: horse on March 29, 2009, 03:00:18 PM
I've got underslung AP:

(http://i136.photobucket.com/albums/q171/horse_ZX10R/New%20Stuff/DSC00111copy.jpg)

Title: Re: Winter mod's finished
Post by: ZXRich on April 02, 2009, 12:16:08 AM
Quote from: horse on March 29, 2009, 03:00:18 PM
I've got underslung AP:

(http://i136.photobucket.com/albums/q171/horse_ZX10R/New%20Stuff/DSC00111copy.jpg)



I'm liking that rear caliper alot, do you get full coverage of the disc with this set up?

Rich
Title: Re: Winter mod's finished
Post by: horse on April 02, 2009, 04:47:41 AM
Yes, but to be honest don't use back brake much.