News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

King Crbon Goodness.....

Started by drewk8, September 28, 2008, 03:33:25 PM

Previous topic - Next topic

drewk8

Finally managed to get a pic of new exhaust shield. Typical thou, the bleedin sun went in and the full pic doesnt show it off so good.
oh well..



ANN

Very nice indeed, your bike is immaculate

Andy J


jpaterson69

That looks really nice Drew.
Are you happy with the quality mate.
Wonder if they will make the rest of the bellypan eventually. I dont see any other companies doing that rear part or the bellypan.

Rgds
John

pat

Looks like a quality bit of kit, really goes well with tha carbon Racefit.  :icon_thumright:

Now go & find out if they do a hugger & replace that hideous oversized lump of plastic that the factory saw fit to stick on !   [wall]

NinjaPaul

Yes KingCarbon do a hugger for the 08 ZX10R but its only a direct copy of the standard one.  :icon_thumright:

fastzx10r

As a few of the guys on here know jim who owns kingcarbon has become a good mate of mine and has done a couple of trackdays with me and jay(EXJ10R),i've just rang him and told him theres a few people asking about the bellypan for the 08 in carbon,well guess what he said he'll use mine to get the mould from and make them in carbon,these will take a few weeks to sort out but they will be doing them,just in case anyone dos'nt know they are now doing the front mudgard for the 08 and i've fitted one on mine and they look really nice,if anyone wants anything from them just pm me because he said he will give me good discount for people i know :occasion14: :occasion14:

drewk8

quality is top spot mate.. as for hugger, i want a green one.. might try painting mine first..
let you know :icon_thumright:

Nick Zx10

Lovely stuff.  :love10:

Pleasure to look at +bhp  :icon_thumright:

r1ninja

Does the Growler really need the upper hanger bracket?

www.r1forum.co.uk

No-one needs more than seven fifty

jpaterson69

Fast,
Thanks for the heads up on Jim looking at doing the belly pan. What a service !!, there is no one doing a belly pan for 08 or that rear part.
r1ninja, yip in my opinon it needs the upper hanger mate, the rear belly pan cosmetic cover is just bolted onto tag welds on the growler pipe, the growler pipe is pure slipon to the oem pipe, a sleeve fitting, no compression banjo fitting, just a bit of silicon sealant and slipped over, the fitting it made to measure!!. There is a tension spring from the pipe onto metal U fitting that goes onto a bolt already there from when original boom box was there, so that holds tension on the fitting, stop it sliding off. Even thought the growler can and link pipe are only about 850 gms, still think a bit dodgy to do without upper clamp. Not an Engineer though!.

John



drewk8

my sheild brkts have never been spot on ,on the growler.. i have tried bending them into a better fit and was ok with orig shield but way off with new carbon one. luckily i know a s##t hot welder who re welded the brkt near the rear wheel back on for me and as im a polisher you wouldnt even know it had been moved so it is now spot on...


HammyUK

Quote from: fastzx10r on September 29, 2008, 05:28:05 PM
As a few of the guys on here know jim who owns kingcarbon has become a good mate of mine and has done a couple of trackdays with me and jay(EXJ10R),i've just rang him and told him theres a few people asking about the bellypan for the 08 in carbon,well guess what he said he'll use mine to get the mould from and make them in carbon,these will take a few weeks to sort out but they will be doing them,just in case anyone dos'nt know they are now doing the front mudgard for the 08 and i've fitted one on mine and they look really nice,if anyone wants anything from them just pm me because he said he will give me good discount for people i know :occasion14: :occasion14:

Be nice to know if he can do a longer belly pan for the 06/07. I want one that runs back to the rear tyre like the 04/05 race belly pan does and comes up around the swingarm like the GP bikes.
I don't need 200BHP.........................ask the guys behind me!

NinjaPaul

Quote from: jpaterson69 on October 01, 2008, 09:02:44 PM
Fast,
Thanks for the heads up on Jim looking at doing the belly pan. What a service !!, there is no one doing a belly pan for 08 or that rear part.


actually there's a company called PIT-ECK in America that trade on ebay, they do a host of carbon parts for the 08 bike but the quality doesnt look as good as the King Carbon stuff.

jpaterson69

Drew,
My rear panel went on, spot on with the growler not adjustment required.
Its a bit worrying that the KC panel required re-welding of the rear bracket on the growler pipe, thats a bit offputting. why wouldnt the holes be in the same place in the mould as the originals!!.
Hammy, I can't see KC doing a re-design full belly pan, yeah it's a great idea to have a similar one to the one I had on my 05, a full enclosed race type with lowered sump, that looked really evil.

rgds
John