News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

zx6r zx10r linkage on ebay.

Started by budda10r, March 23, 2008, 08:22:06 PM

Previous topic - Next topic

chriswillis

One life - Live it!

Chrisblack10r



Volkswagen Master Technician with an 08 zx10r with 181.4 BHP at the back wheel hahaha!!!!!

SaffieD

#17
Here you go chaps - have a read. It's a very worthwhile mod. As regards the dogbones - you need to fit a spacer above the shock to retain the correct ride height but it's then very good. I made up a proper spacer for it - pm me if you want the drawing to make it / get it made. But yeah - read the following....

http://zx-10r.net/forum/showthread.php?t=16897&highlight=dogbone

Hang on - here's what I drew up and made out of some hard nylon on the mill at work....

You may ask why not just use a shim / washer? Because, as I found out, the shock can then turn which is not good. This holds it in place - have a look at the top shock mounting and you'll see what I mean.

tim

basic terms  it keeps rear spring more liniar , standard set up for road /pillion is a compromise ,

when rear spring compreses it keeps spring rate liniar over whole lenth  not compress get hard  and boing  kick you off the high side !!