News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

Bike Table

Started by r1ninja, January 27, 2008, 05:02:10 PM

Previous topic - Next topic

r1ninja

Not mine, but a Gixerjunkies member has built his own




www.r1forum.co.uk

No-one needs more than seven fifty

10rmish

looks as if the bike might fall over if enyone knocks it hard enough.


Jon177

Bet its a pig to get it on the paddock stands when its on there.

Not really much of a table more like a trolly to move it around on.

GRNINJA

thats defo a 2 man job to get that on the trolly and on the paddocks  :shock:
Ride it like you stole it - or at least try

r1ninja

The guy reckons getting it on the stands is a one man job and the bike doesn't have a side stand.


As for knocking it over, well i suppose if you are that clumsy then a bike isn't safe on the ground either

www.r1forum.co.uk

No-one needs more than seven fifty

GRNINJA

Quote from: r1ninja on January 27, 2008, 05:16:57 PM
The guy reckons getting it on the stands is a one man job and the bike doesn't have a side stand.


As for knocking it over, well i suppose if you are that clumsy then a bike isn't safe on the ground either

I find it hard enough on the floor Andy  :dontknow:
Ride it like you stole it - or at least try

Jon177

Quote from: r1ninja on January 27, 2008, 05:16:57 PM


As for knocking it over, well i suppose if you are that clumsy then a bike isn't safe on the ground either

Whooops i just tripped [rofl]

r1ninja

If it were me i'd make it wider and i assume you'd have to have it against the wall when wheeling the bike up the ramp.


Now where did i put that old wallpaper paste table  :dontknow:

www.r1forum.co.uk

No-one needs more than seven fifty

fido

Quote from: r1ninja on January 27, 2008, 05:16:57 PM
The guy reckons getting it on the stands is a one man job and the bike doesn't have a side stand.


As for knocking it over, well i suppose if you are that clumsy then a bike isn't safe on the ground either

One man job with a block and tackle attached to the bike maybe :?:

r1ninja

Quote from: fido on January 27, 2008, 05:47:57 PM
Quote from: r1ninja on January 27, 2008, 05:16:57 PM
The guy reckons getting it on the stands is a one man job and the bike doesn't have a side stand.


As for knocking it over, well i suppose if you are that clumsy then a bike isn't safe on the ground either

One man job with a block and tackle attached to the bike maybe :?:
No more difficult than putting a bike with no stand on a trailer and tying it down.

www.r1forum.co.uk

No-one needs more than seven fifty

HammyUK

would of made that a good foot wider. not enough margin for erreor there on that rear paddock stand
I don't need 200BHP.........................ask the guys behind me!

Andy J

Quote from: HammyUK on January 30, 2008, 07:10:39 PM
would of made that a good foot wider. not enough margin for erreor there on that rear paddock stand

........but then the bike wouldn't be so accessible to work on  :icon_scratch:

magic1

could always double up as a sunbed canopy me thinks!!! [rofl]

HammyUK

#13
would make it a similar width to a standard lift bench Andy. How close do you want to get?

image remove NWS grninja

IS that ok?
I don't need 200BHP.........................ask the guys behind me!

Chrisblack10r

it has lockable wheels too so wheeling it up a ramp onto the top should be ok

putting it on a stand wouldnt be to hard to be honest


Volkswagen Master Technician with an 08 zx10r with 181.4 BHP at the back wheel hahaha!!!!!