News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

Brembo Master cylinder warning

Started by Jon177, December 07, 2007, 05:58:46 PM

Previous topic - Next topic

Jon177

I know alot of us are aware of this but ive just read this on another site and it details the tell tale signs really well so i thought i would post it here.

------------------------------------------------

There are some mastercylinders that have appeared on the market that are copies of the Brembo 19mm cast radial cylinders.

Without having a 'real' brembo to compare against you could be easily mistaken.

The main differences are the area around the lever pivot on a Brembo is machined flat on bith sides and later cylinders have the dimensions stamped on the top flat, wheras the copies are rough cast.

The finish of the copies is a slightly gloss painted type finish and Brembo's are dull anodized finish, the same goes for the pushrod/span adjuster etc, these are gloss black on the copies and satin/matt on Brembo's.
the clips for the lever pivot pin is black on the copy and silver on Brembo

There is no stamping or etching on the copy levers and are a rougher finish/ not as machined and brembo have the ratio # etched or stamped either on the ball of the lever or in the cut-out just near the span adjuster.
The span adjuter on the copy is really stiff and doesn't 'click' nicely.

The copies come with a reservoir and hose fitted, there is no branding on the reservoir, brembo's dont come with res and the brembo res has the 'B' logo on the lid.

The bleed nipple on the copy is 8 or 10mm nut and Brembo's are 11mm.

I know its a fair list but believe me these differences are slight, I wouldn't have questioned it until it was sat next to a real one.

I think they're on ebay for about £120, they're definately no where near the quality of the Brembo ans as they are a cheap copy the safety could be questionable, certainly not a risk worth the £80 or so saving

------------------------------------------------------------------



HammyUK

+ BHP for the info
Safety is paramount [clap] [clap] [clap]
I don't need 200BHP.........................ask the guys behind me!

r1ninja

Probably find out that fitting a genuine Brembo to your bike would invalidate the warranty and may stop any insurer from paying out if you didn't declare it

www.r1forum.co.uk

No-one needs more than seven fifty

GRNINJA

insurance companies would probably invalidate it if you added a different tax disk holder if they could get away with it  :-/
Ride it like you stole it - or at least try

Jon177

Quote from: r1ninja on December 07, 2007, 07:00:52 PM
Probably find out that fitting a genuine Brembo to your bike would invalidate the warranty and may stop any insurer from paying out if you didn't declare it

Quote from: GRNINJA on December 07, 2007, 07:06:58 PM
insurance companies would probably invalidate it if you added a different tax disk holder if they could get away with it  :-/

They just take off the extra it would of cost if you did declare it, on the pay out.

HammyUK

assuming they pay out. one of the lads down here got nowt because of the braided lines not being declared.
I don't need 200BHP.........................ask the guys behind me!

Jon177

Quote from: HammyUK on December 07, 2007, 07:10:41 PM
assuming they pay out. one of the lads down here got nowt because of the braided lines not being declared.

Thats a piss take on their part. How did your mate know they didnt come as standard [wall] Bastards

HammyUK

new bike.
so they had him.
fuckers though
he's going to court, they reckon hes got a good chance.
tried to say the lines affected how the bike was in the accident. bollocks considering it was crescent who fitted them to his k6!
I don't need 200BHP.........................ask the guys behind me!

slapknacker

i'm too thick to make a banner, have tried at the banner maker site, can make one but cant get it uploaded. shyt shyt shty shyt.............
pissed of now!


Andy J


Chrisblack10r



Volkswagen Master Technician with an 08 zx10r with 181.4 BHP at the back wheel hahaha!!!!!

HammyUK

I'd say at that price buy from a dealer and know for a fact
I don't need 200BHP.........................ask the guys behind me!