News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

race body work spraying

Started by GRNINJA, October 28, 2007, 04:43:20 PM

Previous topic - Next topic

GRNINJA

well I got some spare bodywork of essexboy the other day and well the condition weren't great so I went to halfords and bought paint sandpaper filler white spirit and a few other things laquer and stuff...

I have never actually sprayed anything worth painting before i.e bodywork... so this is my first real attempt... so watch this space  :icon_thumright:
Ride it like you stole it - or at least try

Andy J

have fun G.  It's all in the prep and taking time with the paint too.

I've painted loads of stuff with rattle cans and they've come out really quite good too  :icon_thumright:  obviously a compressor is better but make sure it's got a decent sixes air tank as the small ones are no good for spraying as they lose pressure too quickly.

Take loads of time sanding and filling and then primer, paint and laquer and the jobs a good un.

Preparation
Take time spraying
Don't do ti if it's very cold

Sorted
:icon_thumright:

Chrisblack10r

did you get any wet and dry paper?


Volkswagen Master Technician with an 08 zx10r with 181.4 BHP at the back wheel hahaha!!!!!

mongo

Its not the air tank size, its the output that the compressor can do (one with a decent bhp). You also need a decent CFM from the compressor then you should be fine (as they top back up again, you may find the compressor works alot and keeping the pressure going all the time if its a smaller tank).

It is all i the prep though, make sure you have somewhere warm as well this time of year, otherwise you will get an orange peel type effect if it gets too cold and you put on a little too much paint, so make sure you keep the coats nice and thin, it will dry better it will however take more coats to do it this way.


Quote from: Andy J on October 28, 2007, 04:53:02 PM
have fun G.  It's all in the prep and taking time with the paint too.

I've painted loads of stuff with rattle cans and they've come out really quite good too  :icon_thumright:  obviously a compressor is better but make sure it's got a decent sixes air tank as the small ones are no good for spraying as they lose pressure too quickly.

Take loads of time sanding and filling and then primer, paint and laquer and the jobs a good un.

Preparation
Take time spraying
Don't do ti if it's very cold

Sorted
:icon_thumright:

GRNINJA

i don't want it perfect but nice would be call , I have a heated garage so all warm  :icon_thumright:

I have sanded and I have preped I have done undercoats with 2 types of primer 1 is a filla prima and one is a std plastic primer  :icon_thumright:

just waiting for the 3 undercoat to dry this time , will start first top coat soon  :icon_thumright:
Ride it like you stole it - or at least try

mongo

Make sure the primer is dry beforehand, i know hte rattle can directions say 15-20 mins between coats. I would only stick to that if it was super fine coats you were doing and had probably doubled the amount of coats.

After doing the primer i would often go over the primer with a wet n dry of around a 600 grade (After leaving it to dry for 24 hours). Then put the top coat on, usually in around 6 light coats. The heavier the coat, the more likely it is to flake off. Im no expert, this is just what ive done in the past to achieve a good finish  :hello2:

slapknacker

just a few tips Glenn,

once you have put 2/3 coats of primer on and let it go off,
rub the high spots off with wet and dry again before you put the top
coat on. ( use 1200 wet/dry.)

after you have put the the 2nd top coat on flat that off aswell then put the
last coat of top coat on.

then use the t.cut and finaly polish to a nice sheen.
if you do those steps you should get a glass finish.

if you going to put a clear laquer on put that on after you have
flatted of the last top coat :icon_thumleft:

you will get spray shop results, a hair dryer to lightly blow
over the paint will let it go off faster. :icon_thumleft:

good luck.
i'm too thick to make a banner, have tried at the banner maker site, can make one but cant get it uploaded. shyt shyt shty shyt.............
pissed of now!

GRNINJA

Ride it like you stole it - or at least try

GRNINJA

ok I fucked up the tail unit big time  [wall] [wall] [wall]

gonna have to start it all over again but the front fairing is ok  :icon_thumleft:
Ride it like you stole it - or at least try

mongo

looking alright for a race fairing, so long as you are happy with the results  :hello2:

its a pain in the ass to have to restart stuff, are you going to leave it to dry and then sand it all back?

GRNINJA

yeah the tail unit is the pits even for a race unit.....

I tried doing 2 tone and the paint just didn't work as I did the dark colour first like a numpty  [rofl] [rofl] [rofl]
Ride it like you stole it - or at least try

Jon177

Nice one Bud stick with it. Im thinking you should maybe buy some green [whistle]