News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

Internals or whole hog

Started by gopher, October 09, 2007, 04:35:55 PM

Previous topic - Next topic

gopher

  O k not going into the money side but purely on a performance basis.... If you had the choice would you go for ohlins R & T forks or just do the internals of the standard forks with a k-tech/ohlins converstion ? ........................... Now the same question with the money thing thrown in the R&T forks are $2650 with ohlins superbike valves, delivered from the good ole USofA (is that good ?)  The ohlins / K-tech conversion is £400

mr K seems to have given me 50hp to much!!! but i think i can manage. O K maybe with a bit  more practice !!

Wh|t3R@bb|t

Erm...only thing I can say on this is that I spoke to Richard @ maxtons and he said on the 06/07 model the front forks were generally pretty good and just needed the internals doing and reworked. This was £250....a lot cheaper than replacing them.  He has a great reputation with the race boys and if he says thats all that needs doing I am happy with that....

I am having front done and a brand new rear shock during the winter and its looking like about £850 all in....that nearly as much as an Ohlins rear shock!  :shock:

gopher

 Do maxton make front forks ?

mr K seems to have given me 50hp to much!!! but i think i can manage. O K maybe with a bit  more practice !!

GRNINJA

dude you can make yours almost identicle to the Road/Race forks... just buy the 25mm internals.... they are the same as the valves used in the r&t forks....

if you really wanted to waste ya money like that just keep watching motoforum and a set of gas fork with come up for the price of new R&T forks and are worth that sort of money....

I think for trackday usage anything more than the 20mm internals are over kill..... just get you arse over too www.mhracing.com Mark will sort you out and was slightly cheaper than the k tech... and my eyes ohlins is better than k tech but thats just me  :icon_thumleft:
Ride it like you stole it - or at least try

gopher

I hear what is being said thats why i was looking for opinions with the money side left out.. I spoke to colin at 100% suspension today who seems like a top man, The 25mm stuff is £900 +vat  (he said there is no need go that far) Forks from usa work out at £1300.......
I know that i don't need the front forks but then i do not need 163 rwbhp.... But are the R & T forks better than a re-valved standard front end ?

mr K seems to have given me 50hp to much!!! but i think i can manage. O K maybe with a bit  more practice !!

GRNINJA

the R&T forks will be better than 20mm revalve yes.... but roughly the same as a 25mm internal revalve..... the only different from the R&T forks and the 25mm internals is that the R&T will look more bling and be slightly lighter than the std fork tubes....

Keiron has the R&T forks so you can PM him for his opinion on how they work... he has had k techs before too  :icon_thumleft:

still think you should hunt on motoforum for some gas forks ..... big bling  :headbang:
Ride it like you stole it - or at least try

Andy J

#6
Quote from: gopher on October 09, 2007, 04:43:56 PM
Do maxton make front forks ?

not that I'm aware of,

here's some info from their site

MODERN FORK CONVERSIONS
At Maxton we believe that in most cases there is no need to change the forks for expensive aftermarket items such as Ohlins or WP. There is always a good set-up in the original equipment, it just needs setting up correctly. Our fork conversions consist of two processes, a re-spring and a re-valve to suit your rider weight and - just as important - bike usage such as racing, fast road riding, carrying a passenger, track days, touring etc. The re-valve is a modification to the damping mechanism to suit the spring rate which allows you to use the correct weight oil so that the oil system is metered correctly. The conversion consists of a complete strip down and service, so we replace seals and also bushes if needed. In some cases there is too much clearance between the "original equipment" bushes and the stanchion, so we machine new bushes to reduce the clearance and stop the seals blowing.

pat

Quote from: Wh|t3R@bb|t on October 09, 2007, 04:41:05 PM
Erm...only thing I can say on this is that I spoke to Richard @ maxtons and he said on the 06/07 model the front forks were generally pretty good and just needed the internals doing and reworked. This was £250....a lot cheaper than replacing them.  He has a great reputation with the race boys and if he says thats all that needs doing I am happy with that....

I am having front done and a brand new rear shock during the winter and its looking like about £850 all in....that nearly as much as an Ohlins rear shock!  :shock:

:iamwithstupid:

+1 on getting this done over winter

supergirl

#8
Quote from: Andy J on October 09, 2007, 05:45:39 PM
MODERN FORK CONVERSIONS
At Maxton we believe that in most cases there is no need to change the forks for expensive aftermarket items such as Ohlins or WP. There is always a good set-up in the original equipment, it just needs setting up correctly. Our fork conversions consist of two processes, a re-spring and a re-valve to suit your rider weight and - just as important - bike usage such as racing, fast road riding, carrying a passenger, track days, touring etc. The re-valve is a modification to the damping mechanism to suit the spring rate which allows you to use the correct weight oil so that the oil system is metered correctly. The conversion consists of a complete strip down and service, so we replace seals and also bushes if needed. In some cases there is too much clearance between the "original equipment" bushes and the stanchion, so we machine new bushes to reduce the clearance and stop the seals blowing.


MY EYES MY EYES
the race is long and in the end, its only against yourself...

Jim996

If you are just after performance go internals.......I have the 20mm K-tech kit and a re-spring and it's bloody good...........the 25mm kit is top race spec but costs nearly as much as an Ohlins set up and is probably overkill......if I had a £1000 to spend on my track bike I would probably go 25mm K-tech as I would get a unit perfectly set up for me rather than an off the shelf Ohlins unit......

If it's bling your after and have the cash then it's Ohlins every time....although I had heard somewhere that the R&T forks often need a re-valve for track work.....

As ever with bikes.....sensible isn't what we always do is it?

Wh|t3R@bb|t

#10
Quote from: supergirl on October 09, 2007, 11:07:18 PM
Quote from: Andy J on October 09, 2007, 05:45:39 PM
MODERN FORK CONVERSIONS
At Maxton we believe that in most cases there is no need to change the forks for expensive aftermarket items such as Ohlins or WP. There is always a good set-up in the original equipment, it just needs setting up correctly. Our fork conversions consist of two processes, a re-spring and a re-valve to suit your rider weight and - just as important - bike usage such as racing, fast road riding, carrying a passenger, track days, touring etc. The re-valve is a modification to the damping mechanism to suit the spring rate which allows you to use the correct weight oil so that the oil system is metered correctly. The conversion consists of a complete strip down and service, so we replace seals and also bushes if needed. In some cases there is too much clearance between the "original equipment" bushes and the stanchion, so we machine new bushes to reduce the clearance and stop the seals blowing.


MY EYES MY EYES

Yeah I know, but come on...that was from the guy with pink wheels!  [whistle]

Love ya really Andy  :tongue3:

Andy J

 :-*

Ok I'll change the colour  [whistle]

gopher

 OK OK OK i have booked in on the 10th to have a 20mm k-tech kit fitted :icon_thumright:  What is being said here is exactly what the pro's say so thanks for the advise me dears....... P S with the change from not having the R & T forks i am hoping to go to cartagena for 4 days in december with focused........ Well i have to test the new suspenders eh  :tongue3:

mr K seems to have given me 50hp to much!!! but i think i can manage. O K maybe with a bit  more practice !!

GRNINJA

I don't love you anymore  [naughty] and you closer to mhracing than K tech as well  [wall]


all I can say is  :pottytrain2: :tongue3:


[rofl] [rofl] [rofl]
Ride it like you stole it - or at least try

gopher

Quote from: GRNINJA on October 10, 2007, 07:42:14 PM
I don't love you anymore  [naughty] and you closer to mhracing than K tech as well  [wall]


all I can say is  :pottytrain2: :tongue3:


[rofl] [rofl] [rofl]

[rofl]   Having it done at mallory mate my mate is having his done aswell, Thought that way we would have something to do i.e watch the bikes go round n round and also go into rencullen and spend even more money :icon_thumright:

mr K seems to have given me 50hp to much!!! but i think i can manage. O K maybe with a bit  more practice !!