News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

The KX250J story so far...........

Started by Andy J, November 22, 2006, 03:22:17 PM

Previous topic - Next topic

Andy J

Work underway on KX
KX is stripped and engine comes out tonight to get the sump helicoiled, discussed it with the local m-x shop guy and he reckons just helicoil it and don't bother to strip the cases as it's only a small bit of ally swarf in the gearbox so nothing to worry about, sounds good to me.

Rear shock is dead for sure to the point of being dangerous (crack in the base bracket) it wasn't a KX shock, what joy. The shock was so poor that it had smashed the rubber bung on the rod to pieces !!!!

Throttle was sticking badly and had been put together incorrectly, now cleaned and sorted so it 'snaps' back just like it needs to

Swing arm bushes are very worn so will be replaced if I can remove the strnage castle type swing arm spindle nut

Top yoke was loose

Chain and sprockets are realy really bad so need replacing


Good things about KX

Excel rims and new spokes are in top condition

Exhaust is in great condition

Engine sounds ok thankfully

Rads have been rebuilt

Head bearings seem good

'Fatbars' are a nice touch t

It's apparently got a new clutch and basket, I'll check it though

r1ninja

Here ya go Andy, i got one of these for my CR250 and they are better than the one that comes with the bike as they aren't written in Japanese english
https://www.buyprism.com/ProductDetail.asp?PRDID=1304


www.r1forum.co.uk

No-one needs more than seven fifty

Andy J

thanks Andy, I've already ordered one I'll take you advice on the 100mm from the top for the oild and will try that tonight as I can't seem to get the info for free unfortunately

Andy J

#3
well it's all in bits now.swing arm bushes were fooked for sure........... engine is off for the helicoil in the morning  :icon_thumright:

in bits 1


in bits 2


swing arm bushes,some fell out !   :shock:


engine


knackered shock, you can just see the crack and the bend  :shock: on the bottom fitting if you look closely


we're moving on with it now Woooooooohooooooooooooo

i'll keep the pics coming as I'm sure that you agree that this is very exciting .....NOT !

r1ninja

Eric Gorr
Forward Motion
P.O. Box 69
Streamwood, IL, 60107
Tel.1-630-825-5645
ericgorr@hotmail.com
www.forwardmotion.com.mx

Its appoximately 6 inches from the top of the fork tube with the spring
removed and the forks bottomed.


>From: A G
>To: ericgorr@hotmail.com
>Subject: Fork oil height
>Date: Wed, 22 Nov 2006 12:23:51 +0000 (GMT)
>
>Hi Eric,
>Just wondered if you'd know off the top of your head
>the fork oil height for a 1993 KX250. Friend has just
>bought one but there is no manual.

www.r1forum.co.uk

No-one needs more than seven fifty

Andy J


Andy J

all coming back together now, sump is helicoiled, forks are rebuilt, wiring is resealed.....

Just need the new suspension bushes, swing arm nut and a rear shock and we're sorted Woooooooohooooooooooo



Then the lads want new plastics and graphics and they'll be so shocked when they open that thriottle....ha ha ha ha ha  [whistle]






GRNINJA

nice mate I wish I was mechanical like that.... I can follow instuctions and I don't mind giving things a go but I don't trust myself lol [rofl]
Ride it like you stole it - or at least try

Jon177

I know what you mean about the throttle Andy. :shock:

I went from wringing the neck of a 03 RM 125 to not being able to properly ride my 05 KX 250 for the power difference.

Andy J

wooooohooo found a shock for £100 and fixed the choke last night........'cooking on gas' now  :icon_thumright:

Rear suspension bushes shouls arrive tomorrow too  :downtown:

r1ninja

Swingarm in the oven, bushes in the freezer, bobs your uncle

www.r1forum.co.uk

No-one needs more than seven fifty

Andy J

Quote from: r1ninja on November 28, 2006, 04:17:24 PM
Swingarm in the oven, bushes in the freezer, bobs your uncle

another good idea on the freezer thing  :icon_thumright:

Andy J

Bushes are now in place and swingarm is perfectly fitted  :icon_thumright:

Andy J

another job sorted tonight  :headbang: managed to collect a 1995 RM250 Suzuki shock last night from a guy in Manchester got it home and tried it against the bike and thought 'bollox'

However, tonight I went back into the garage and grinder in hand and now it fits like a glove and it works really well too great damping and spring, I'm well chuffed and all for £30 !!!!  [clap]

All we need now is a new chain and sprocket set which I'll pick up tomorrow so we'll be out on it at the weekend......


Also, I managed to pick up a full set of plastics, brand new, from ebay for £36 !!! they aren't the right ones but We'll make the buggers fit, the mudguards will fit anyhow and the rad panels are the ones we want but we just need to make some brackets.......... Can't wait to see them  :icon_thumright:

This is going to be one lovely bike in tip top condition in the next few weeks  :headbang: :headbang:


Andy J

all done, took the afternoon off to get it back together and tomorrow we should be out on the blighter Woooooooooohoooooooooooooooooo  :hello2: :hello2: :hello2:







God I'm good to my lads to do all that, even bought them a chain and sprocket set today, they have to pay me back though  :boxing: but not bad for £45 for talon stuff and a half decent chain