News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

Spoke Advice

Started by fridayman, June 19, 2007, 08:53:46 AM

Previous topic - Next topic

fridayman

A friend of mine is in South America on his KTM Adventure and sent me this email last night:

"Ecuador has finally ruined my front rim.  I hit a really big change of seal at about 120kh and sure enough it put a flat spot in it so bad you could see the tube.

So anyway, turns out they can get Excel rims here in Ecuador and at about the same price as the UK I figured I may as well get it.  However, I'm not convinced KTM Quito have built it correctly.

The spokes on one side are fine, the nipples are coming straight out of the rim and it all looks good.  However the spokes on the other side all have a curve in them and the nipples look like they've all been cross threaded onto the spokes.  Clearly it is not the correct rim but when asked the mechanic said that they had done this loads before and it will be okay.  To me it looks as if the rim quickly crack where the nipples come out of the rim on the wrong angle and really, spokes should be straight should they not?

I'm going to take it back but the likelyhood is that they won't be able to get the proper rim and I guess the only other option will be to go for an original rim which is a waste of money.  So my question is, what do you think of this (check the pics), reckon its safe?   Should I just carry on on it or insist on the proper rim?





"

What do you guys think???

zxyogi

Dont look to clever do it!
Email it onto a rim specialist....Simple likes rims as he posted a pic of me in my womens clothes....but that be the wrong sort of rim  :lol:

r1ninja

Looks to me like they haved laced it wrong

www.r1forum.co.uk

No-one needs more than seven fifty

Andy J


zxyogi

Looking at it again,methinks you are on the ball!!

simple

 :shock:

Don't look quite the ticket !

Feck riding that  [whistle]
Taking it back to the old skool !

zxyogi

Most of Ets mates...bar me of course are slightly...errrrrr retarded......






;-)



:lol:

fridayman

Quote from: zxyogi on June 19, 2007, 12:25:40 PM
Most of Ets mates...bar me of course are slightly...errrrrr retarded......

;-)

:lol:

Most? OK...  [whistle]

rotax81

its all wrong mate. the rim is probaly built for a hub that has short spokes on one side and long on the other.
it only takes a couple to snap and theyre all gone in no time  :shock:

Rockingham International short vid http://youtube.com/watch?v=aQDCOro0yZo

GRNINJA

they look laces wrong I used to re align cycle wheels in a bike shop when I was younger... if one or two goes then can take the whole wheel out... even at 15 MPH on a pedal bike so imagine what it would be like at speed on a motorcycle  :shock:

Ride it like you stole it - or at least try

Jon177

Et email these people, they are one of the best wheel builders around :icon_thumright:

http://www.central-wheel.co.uk/

fridayman

So my mate went back to them and spoke to the owner who agreed to do it again, properly this time.

GRNINJA

Ride it like you stole it - or at least try

Jon177

Quote from: fridayman on June 22, 2007, 10:45:53 AM
So my mate went back to them and spoke to the owner who agreed to do it again, properly this time.

No pun intended :lol: