News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

Kent Cams

Started by michael4012, February 02, 2016, 10:55:06 AM

Previous topic - Next topic

michael4012

Iv got a pair of re-grind kent cams kawa- 30 & 32 with 3000 mile on em for a gen3 will also fit gen1 & 2 with the appropriate sprockets & screws. Usual price from kent is around Ã,£280 including your cams with a 2-3 week turn around. There yours for Ã,£150.00  :icon_thumright:

zxyogi

What sort of gains are you looking at fitted to a Gen 1 with a full system and a PC?

michael4012

Quote from: zxyogi on February 04, 2016, 04:40:52 PM
What sort of gains are you looking at fitted to a Gen 1 with a full system and a PC?
I have no idea mate :roll: In the Gen 3 it makes (DID) make 6 horse at the top a little was taken out the middle but the motor would rev higher :icon_thumright: I think with yours if you dial in the stock cams there are gains to be made if you want more at the top. If you do that & ditch the PC3 with the TRE and get the woolich flash and dyno you will do nicely  :icon_thumright: Answering your question i don't know enough about the Gen 1 cams to quote wether the Kent cams i have would make a noticeable difference :dontknow: But you can call Kent Cams direct and ask for Tony he does all bike cams & will know. They are re-grind to kawa 30 inlet & kawa 32 exhaust  :icon_thumright: 

Matt83

Absolute bargain price mate. My spare motor has got kit cams in it which will be similar lift and duration, it was great on road and track and put out a genuine 174bhp with a very, very mild tune. Buy them!

michael4012