News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

Quite possibly a new zx10r owner

Started by Chris__p, August 19, 2015, 08:01:47 PM

Previous topic - Next topic

Chris__p

Hi all, so I'm off to go look at a c2h zx10r on Friday with the view of bringing it home to join the 4xv and zx7r, it all sounds spot on from the ad and talking to the owner.
Is there anything specific to look out for? It's low mileage with a full history.

HammyUK

Frame around the headstock on the welds - known weakspot from wheelies.
Original brakes are shockingly poor - make sure they've been looked after.
Exhaust valve sticks - check it spins on the motor at ignition on
Certain bikes had rotor issues on the windings - not all but may have been affected - if so should have been done under warranty.
As any bikes - panel fit, brackets, frame covers, stomp grip, etc - make sure they aren't hiding anything
I don't need 200BHP.........................ask the guys behind me!

Chris__p

Thanks, a few bits to look out for there then. Did see one with the later brakes, is that a worth while change?
So the exhaust valve you should hear rotate then or see it move? Not looked closely at one before

HammyUK

A Brembo RCS is enough for the road to resolve the mismatched bore ratios internally.
I don't need 200BHP.........................ask the guys behind me!

Chappo

Welcome mate,

I think Hammy has given you a good check list to start with,  :icon_thumright:

davemfox

1993 YZF 750 SP (in PINK/white as a homage to AndyJ)

Chris__p

So all set for tomorrow armed with some stuff to look out for and some cash and the gear to ride it home, hoping it's not a wasted trip

Chris__p