News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

New MOT LED light failures

Started by DONKEY, April 28, 2012, 09:01:00 PM

Previous topic - Next topic

DONKEY

Just thought i would share what will become a problem for a good many Bike owners from now on due to MOT testing changes regarding LED tail lights.
I had to fail a Bike today for this new addition...Unfortunately  :crybaby2:

I've included the explanation from VOSA.

LED lamps
An acceptable alternative to standard bulbs, these lamps tend to use multiple LEDs. The MOT requirement is that at least 50% of the LEDs must illuminate. If not, the lamp will fail for being ‘so damaged or deteriorated that its function is impaired’.
Combination rear lamps.
Such lamps usually have a clear lens, which is illuminated red when the rear position lamp is on or the brake is applied. If a direction indicator is switched on, half of the lamp flashes amber, whilst the other half remains the red of the stop and/or rear lamp.
This type of lamp does not meet the regulatory requirements and is therefore illegal. If one is fitted to a machine presented for test, then it should be failed for the stop and position lamps being adversely affected by the operation of another lamp.
Any and all advise given is protected by the Donkey Data Act of  1809...

fringe80


DONKEY

Quote from: fringe80 on April 28, 2012, 10:15:25 PM
load of poop really...... :brave:

Yep i agree, They obviously have a lot of spare time on their hands  [wall]
Any and all advise given is protected by the Donkey Data Act of  1809...

big g

 :tongue2: not the best but rules are rules!!

HammyUK

Guarantee that is to stop those trying to bypass the "minimum distance apart" reg.
I don't need 200BHP.........................ask the guys behind me!

Prilla

Donkey, they are not new RFR's, just a clarification of what's been in place for a very long time. The integrated indicators that affect the operation of the brake light (and vise versa) have always been a fail,  so have led indicators where at least 50% of the light source is not working. There's ways round everything but it's certainly nothing new.  :shock:

Rainey

In future disconnect your indicators, if they are not there they cannot be tested... i think lol

NinjaPaul

If they are fitted though dont they have to be working? So just unplugging them would still be a fail, you'd have to completely remove them altogether, front and rear.  :dontknow:

HammyUK

If it's there then it MUST work.
Regardless of what "IT" is.
I don't need 200BHP.........................ask the guys behind me!

andicog

Could be wrong but pretty sure that after a certain year indicators must be fitted and its not just a question of removing the switch etc, Rules are for the obedience of fools and the guidance of wise men , all MOT inspectors should follow this !  :icon_thumright:
Age And Treachery Shall Always Triumph Over Youth And Skill . . . . . . .

SRADChris46

From what i understand, it has to be there if it was produced with it...

Thats what my MOT tester told me last month. I think its an attempt to completely eradicate daytime mot's other than on things like trail bikes.
ASV levers 4 sale...pm me.
Black shorties with red adjusters.

Nutz

I personally have always hated those combi brake/indicator units, I think there dangerous and if involved in an accident because of use with one of them I don't think it would work out in the owners favor.

If I remember correctly bikes pre 1985 are allowed to be passed if the indicators and switch are not present, post 1985 they must have indicators unless they are going for a daytime MOT.  I could be wrong though.

Bit like the headlights,if you have noticed for the last 7 years or so bikes no longer come with a headlight switch as some ruling somewhere says the headlight must be on when the engine is running.

Andy J

Quote from: Nutz on May 28, 2012, 07:17:01 PM
I personally have always hated those combi brake/indicator units, I think there dangerous and if involved in an accident because of use with one of them I don't think it would work out in the owners favor.

:iamwithstupid: :iamwithstupid:

Andy J


FredrickRiley

#14
Quote from: DONKEY on April 28, 2012, 09:01:00 PM
Just thought i would share what will become a problem for a good many Bike owners from now on due to MOT testing changes regarding led light.
I had to fail a Bike today for this new addition...Unfortunately  :crybaby2:


I've included the explanation from VOSA.

LED lamps
An acceptable alternative to standard bulbs, these lamps tend to use multiple LEDs. The MOT requirement is that at least 50% of the LEDs must illuminate. If not, the lamp will fail for being ‘so damaged or deteriorated that its function is impaired’.
Combination rear lamps.
Such lamps usually have a clear lens, which is illuminated red when the rear position lamp is on or the brake is applied. If a direction indicator is switched on, half of the lamp flashes amber, whilst the other half remains the red of the stop and/or rear lamp.
This type of lamp does not meet the regulatory requirements and is therefore illegal. If one is fitted to a machine presented for test, then it should be failed for the stop and position lamps being adversely affected by the operation of another lamp.


Thanks for sharing information.. I am facing some trouble with my lights and now I will try to sort it out.. Thanks again