News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

what now !!!!

Started by jeffoboyo1, October 06, 2011, 09:34:10 PM

Previous topic - Next topic

jeffoboyo1

hi guys sunday gone went up lockup to get my 10r out and f#ck puncture on back wheel, got that sorted lucky for me on a sunday.
nipped in the lockup today cos a customer gave me a bench vice and thought i could use it for bike stuff and when i looked around the floor (had a roof leak and was looking if all ok since i fixed it) i noticed there was a stain on the floor by the front wheel of the track bike, thought at first it was brake fluid but top of the caliper was wet so think it mite be the front forks, didnt have time to have a good look as i had to drop the boys off so dreading saterday when i have a good look if it is the forks, as i know nothing about the set up of them. was ok on the track day i done on the 24th. will let you know what is up with her cos will need some advice im sure.......... :dontknow:

chaospunx

how tight did you ratchet strap the front of the bike on the way home from the trackday you could of popped the seal done it myselrf before i only nip the front straps up now

jeffoboyo1

mmmmm not sure mate , was tight over the seat but not sure on the bars as my mate done that 1. mmmmm.

jeffoboyo1

well it was one of the front forks that was leaking so i removed both, it is best to do both init. not gona try doing the seals my self tho will take them to my local bike shop. anyone got any idea how much its gona cost me. !

chaospunx

i paid £90 for seals done and fresh fork oil

jeffoboyo1

£90 that sounds alot, hope it dont cost that much for mine.

robbosliding

Unless you have the right tools I'd let the shop fit them- it might end up costing alot more otherwise :dink:

jeffoboyo1

yeah im not gona try doing them my self, cos will end up costing alot more  :shock:

HammyUK

A lot?
Take a look at the service manual and see exactly what you need to do just to get the legs separated and decide if it's still expensive.......
I don't need 200BHP.........................ask the guys behind me!

Black10R

Quote from: HammyUK on October 10, 2011, 05:18:12 PM
A lot?
Take a look at the service manual and see exactly what you need to do just to get the legs separated and decide if it's still expensive.......

He's right you know, £90 cheap as chips that is.

jeffoboyo1

called in to my local bike shop and they said £80 so dropping the legs down tomoro for them to do. ive ordered a haynes manual from amazon ,should get it any day now...

jeffoboyo1

picked my forks up today he had only finished 1 so i hung around till he done the other 1, dont look like somthing i will try to do myself  :dontknow: