News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

THROTTLE QUESTION

Started by jeffoboyo1, October 01, 2011, 06:27:16 PM

Previous topic - Next topic

jeffoboyo1

hi all, as some of you may know i got me self a zxr750 trackbike (92) reg
when i done a trackday last saterday i noticed that the throttle dosnt return fast anuff if you know what i mean ! if i give it a quick vroom and let go of the throttle it dosnt settle back to idle as quick as it should. so is it just a case of removing the cover over the cables and trying to get some 3in1 oil in to the cable past the cable cover, or will it be abit more to it than that....
thanks jeffo.......

zx10manic

Could be the actual throttle grip rubbing on the bar end or on the switchgear. If not that, then yea some lube down the cables and all over the carb end with the springs and whatnot should do the trick.

jeffoboyo1

thanks for the reply mate.
when i open up the throttle cable case is anything likly to spring out and get lost as ive never opened one up before.
thanks jeffo....

gnat

No mate nothing in there to spring out,if your still using the 7R throttle tube change it to a 10r throttle tube as it's a cheap way to get a quick action throttle.  They may look the same but it does work.
"I got a new sweater,really wanted a screamer or a moaner"

jeffoboyo1

Quote from: gnat on October 01, 2011, 08:35:39 PM
No mate nothing in there to spring out,if your still using the 7R throttle tube change it to a 10r throttle tube as it's a cheap way to get a quick action throttle.  They may look the same but it does work.
whats the tube mate , i no nothing ,  :roll: is that in the cable cover on the bars or near the carb's and what would i look for if i get 1 thats off a 10r..
thanks mate... jeffo

gnat

"I got a new sweater,really wanted a screamer or a moaner"

jeffoboyo1

thanks gnat , will have look for free download first and if no luck will buy a haynes manual. have a pony for your trubbles mate.

lost

sounds like you have a air leak.carbs or vacum hoses sucking in air

jeffoboyo1

Quote from: lost on October 04, 2011, 09:59:20 PM
sounds like you have a air leak.carbs or vacum hoses sucking in air
it shuts off if im holding the grip and twist it back with my hand , but not shutting off if i let go of the grip, like if its not springin back on its own.....

jeffoboyo1

well i opened up the throttle cover today and it all looks abit worn, will a 10r grip and iners fit it ,!

jeffoboyo1

whats my options on renewing , do i need just the grip and inners or could it be the cables , cant see any frayed wire on cables.

jeffoboyo1

well looks like there is a kink in one of the cables and it has started to fray, so thought i would remove the cables and see if my local shop had some but when i was removing the fuel tank i must of hit the throttle cable link that screws to the side of the carb and ,yes, i snapped it of so not only do i need a cable but need carbs too. the joys of motoring  :shock: :crybaby2:

jeffoboyo1

well my local shop had carbs to match mine £40 , but !!! my carbs have been dynojeted so now hes got to swap the bits from my carbs to the others, so dont know how much it will cost now,  :shock:  :crybaby2:

r1ninja

Quote from: zx10manic on October 01, 2011, 07:11:50 PM
Could be the actual throttle grip rubbing on the bar end or on the switchgear. If not that, then yea some lube down the cables and all over the carb end with the springs and whatnot should do the trick.
+1

Also check the closing cable hasn't snapped and that the cable routing is correct

www.r1forum.co.uk

No-one needs more than seven fifty

jeffoboyo1

changed one of the cables as it was a kink in it, and he cleaned the other one so that it slides thro nice and free. for the cable , the carbs and for him to swop the dynojet bits over it cost me £90. all in. now all i got to do is put it all back together  :shock:  :shock:  :roll: