News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

Ohlins 20mm kit fitted

Started by Chrisblack10r, May 17, 2010, 10:34:53 PM

Previous topic - Next topic

Chrisblack10r

hi all

am after peeps thoughts on the 20mm kit that ohlins do for the front forks

for those that have them or had them what are your thoughts?

i am fitting an ohlins rear shock so want the fronts to be ohlins too so the suspension fitted match front to rear

i have been offered the 20mm kit for £480 fitted and suspension set up to me


Volkswagen Master Technician with an 08 zx10r with 181.4 BHP at the back wheel hahaha!!!!!

HoodyZX10r

I know its not a 10, but had the ohlins kit fitted to my SP2 and what a transformation. There is some major flaws with the SP suspension if you weigh over 70Kgs, so there was obviously going to be a big improvement! So i would say a good bit of kit, but then arn't most of these bespoke fork kits. Especially when its set up by someone who knows what there doing. But £480 sounds like a good deal, a mate had a 20mm K Tec kit fitted to his Gixxer in the winter by race labs and i don't think he got much change out of 600 quid!

£480 + Ohlins = Do it!

  Hoody

Chrisblack10r

cheers dude

they also do a 25mm kit and a 30mm kit but that is over £1000 for either kit then fitting etc

my riding ablity doesnt justify that amount of money to be spent just yet and rekon the 20mm kit will do me fine



Volkswagen Master Technician with an 08 zx10r with 181.4 BHP at the back wheel hahaha!!!!!

HoodyZX10r

yeah Im in the same boat really! But check whats in the kit, as the k tec kit doesn't have the compression damping needles in you have to buy them seperately and i can't remember what i got with mine. I think i comes down to the fact that these kits are far more adjustable so the guys who know what there doing can get it set up far close to your needs!

HammyUK

Quote from: Chrisblack10r on May 17, 2010, 10:34:53 PM
hi all

am after peeps thoughts on the 20mm kit that ohlins do for the front forks

for those that have them or had them what are your thoughts?

i am fitting an ohlins rear shock so want the fronts to be ohlins too so the suspension fitted match front to rear

i have been offered the 20mm kit for £480 fitted and suspension set up to me

the new Ohlins 30mm kit is completely different to any of the others.
The 20 & 25 are new piston and needle adjusters where the 30 is a brand new type of cartridge that is dry and not pressurised.
It puts the comp in one leg and rebound in the other and basically splits the leg in two using the piston and you can change the settings in minutes. That retails at around £800 but is actually a better system than what is inside the R&T forks which are only really the 20mm kit.
I don't need 200BHP.........................ask the guys behind me!

frizz

i would get rear shock fitted and set up for your riding style and see if you think its worth doing the forks

ive got ohlins rear shock and had it serviced and set up  by 100% suspension over the winter after having it for 2 years and what a difference also put front forks back to standard settings which i change the oil in every year and its loads better even for track evenings at cadwell

just my thoughts coz i thought of getting forks done aswell but not now

Andy J

well my contraversial 2p is ;

for the majority road riding undertaken does any suspension upgrade make a noticeable difference that's worth more than a check of sag etc and a regular oil refresh  ?  :dontknow:

we all talk of upgrade this and braided that ....... changing calipers, footrests etc but isit all 99% bling and creating a bike that's yours rather than the improvements being required

Myopinion is that it is 99% creating your own bike and unless your racing it around race circuits on a regular basis then there's simply no need to spend

Surely everyone who has spent to upgrades is going to say how much improved things are  :tongue3:  The 'tuners' would have limited turnover if they told us that our bikes are more than fine and we the riders are the limiting factor   [whistle]

yes, i have a load of extras 'bling' on mine but none make me any quicker as that's down to me and i ride as fast as my brain feels comfortable with and my skills are limited way before i get anywhere near the limitations of my old '05.

Chris - Remember Phil a couple of summers ago on his standard 'busa and how smooth and fast he was  ;-)

Bling it up i say  :occasion14:

r1flyguy

Quote from: HammyUK on May 18, 2010, 08:12:51 AM
The 20mm are new piston and needle adjusters where the 30 is a brand new type of cartridge that is dry and not pressurised.
It puts the comp in one leg and rebound in the other and basically splits the leg in two using the piston and you can change the settings in minutes. That retails at around £800 but is actually a better system than what is inside the R&T forks which are only really the 20mm kit.

So Hammy, you sold me some cheap crap 20mm fork setup, ya git  [rofl] [rofl] [rofl] [rofl]

The good lady has dropped them off for me to get serviced and set up to match the shock i bought, lets see what happens  :headbang:

HammyUK

LOL - you won't be disapointed Gaz.
The difference over stock is massive.
Where Ohlins have gone with the new 30mm kit is to combine the best of both the 20 and the 25mm kits to come up with a non pressurised kit that can be altered in minutes.
Its basically where the new BPF forks on the latest bikes is coming from - using the actual inside as the seal rather than a cartridge - even the oe forks are cartridges that pressurise in use.
Thats why the are cheaper than the 25mm cartridges as they are a new type of piston and they only need one for each fork - rebound in one and copm in the other so no need for 2 seperate circuits in each fork which is where the cost comes in to it.
I don't need 200BHP.........................ask the guys behind me!

davemfox

Chris, why don't you speak to Maxton about their BPF conversions... Don't forget they will sort your forks to match your weight, riding style and any other suspension mods you have  :icon_thumright:

They have done most of my bikes that have had various different setups

Dave
1993 YZF 750 SP (in PINK/white as a homage to AndyJ)

slim-shany

i don't think you can waste money on suspension/braking for any sports bike!everything else is a bit bling but not suspension and braking mods..i had a ohlins rear shock and the ohlins 20mm fork kit fitted at mh racing to my 2nd gen and it feels awsome,now i aint no racer but it does'nt now try too throw me out of the seat on most rides..its like riding a magic carpet now :lol:..if you have the money do it :icon_thumright:.

Chrisblack10r

cheers slim, just what i was after

yeah i agree with the main that suspension is a bit blingy, but come on, if i spend a few well earned £££ on something that will give me confidence to ride and less or a throwing my arse off the seat (which now happens more regular since lossing 47lbs in weight lol) then that can only be a good thing

as for the 30mm kit, yes top bit of kit, but its the top bit of kit for a reason a) its over £1200 and then fitting as i've been investigating b) its desgined for the superbike racers and such like

now i can tell a good story but not one that can justify spending over 3 times the price of a 20mm kit

hammy i cant find the 30mm kit for £800 bud, not even liam

cheers  :icon_thumleft:


Volkswagen Master Technician with an 08 zx10r with 181.4 BHP at the back wheel hahaha!!!!!

Chrisblack10r

well

what can i say

WOOOOOOOOOFUCKINGHOOOOOOOOOOO  :headbang: :headbang: :headbang: :headbang: :headbang:

picked up my zx10r from kais today

had the 20mm kit fitted and the ohlins rear shock serviced and fitted and then set the bike up to my weight

first ride home (50 ish miles) bike feels totally different, changes in tarmac surfaces are now absorbed and the bike now likes to tip in nice and easy and stay on the line I want it to stay on even if it rides over a bump mid corner

tested it on cats eyes on the motorway, yes not a good test i know but they feel somewhat like riding over a little pebble and not the boulder it used to feel like

Kais have done a fantastic job to the bike and if you're in doubt about suspension mods then dont be  B-)













Volkswagen Master Technician with an 08 zx10r with 181.4 BHP at the back wheel hahaha!!!!!

Andy J

excellent  :icon_thumright:

gotta love 'Oh Lynns'   ;-)

HoodyZX10r

the sound of a happy man! money well spent then chris.  :icon_thumleft: