News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

Single sided swinagrm project the start MV

Started by gsxr7111000, April 08, 2010, 06:02:49 PM

Previous topic - Next topic

r1flyguy

Have to agree the paint match is very poor

but nonetheless, the job to date is fantastic, very jealous  :icon_thumright:

Can't wait to the end result  :headbang:

HammyUK

Just so you know there is 2 paints on the 06/07 frame - the mains side spars are a metallic spark black which is the same as the 04/05 fairings BUT the rest of the frame and swingarm are just a standard low gloss/satin black.
Hence the reason I used BMW Metallic Spark Black on the 09 arm for mine as it is nice and sparkly.
Make sure though that it has been "cut" back after the laquer though as you won't get the correct colour until you have done this. Use a proper cutting compound to finish it off and then a damm good wax to seal it.
I don't need 200BHP.........................ask the guys behind me!

jamma10566

Not necessary to cut it back if you use the right mix of clearcoat and matting clear.
Alternatively, you can achieve the right level of satin finish by adding talc to ordinary lacquer. Just try test pieces til you get the finish you want.
Sponsor me please, its a very good cause.
http://www.justgiving.com/James-CoryTakesabullet

HammyUK

Jamma - he doesn't want matt - he ordered the 06/07 frame match colour and they sent him the base matt not the metallic side rail colour.
You do still need to use cutting compund with a base/laquer colour otherwise all you'll get is a gloss with no sign of the metallic underneath.
I don't need 200BHP.........................ask the guys behind me!

jamma10566

The colour, including the metallic flake, is in the basecoat, the level of gloss is in the clearcoat. The frame is a semi gloss finish which is best achieved with a 50/50 ish mix of clearcoat and matting clear. The metallic flake will still show through even a 100% matt finish.
Sponsor me please, its a very good cause.
http://www.justgiving.com/James-CoryTakesabullet

HammyUK

But thats the issue - they sent him the plain satin black that the frame and swingarm are painted in NOT the metallic that the side spars are.
The side spars on the 06/07 are different to the other frames in that they are metallic black.
The 04/05 are satin black all over the 06/07 are metallic ONLY on the side spars - nowhere else.
I don't need 200BHP.........................ask the guys behind me!

matt6r

Looking forward to following this build, my kind of stuff  B-)
Is the arm the wrong shade of black, or is it too matt?
ZX9r, muzzy 998cc big bore, zx10r wheels, forks, swing-arm and brakes. Full Akra system.

gsxr7111000

The arm is ok just the wrong shade of black (lucky for me the gloss black wheel takes your eye off it.. It's more a low shine black.
The plan is to get every thing set up and start using the bike. I have a huge list to complete
Swingarm fit (machine all the spacers which i have done)
shock,chain,wheel alignment, which is pretty easy with the aid of 2 lazer pens ill stick to the rear wheel. (Everything is spot on buy the eye)
Fit adjustable dog bones (machining already done)
quick action throttle
R1 6 pot brake fittment.

After summer strip out and fine tune any issues.

jamma10566

Quote from: HammyUK on May 11, 2010, 06:35:25 PM
But thats the issue - they sent him the plain satin black that the frame and swingarm are painted in NOT the metallic that the side spars are.
The side spars on the 06/07 are different to the other frames in that they are metallic black.
The 04/05 are satin black all over the 06/07 are metallic ONLY on the side spars - nowhere else.

I see what you're getting at now. Sorry, misunderstood what you were saying. :emb:
Sponsor me please, its a very good cause.
http://www.justgiving.com/James-CoryTakesabullet

HammyUK

I don't need 200BHP.........................ask the guys behind me!

gsxr7111000

Had some issues with nothing lineing up, (Not as easy as that guy in the USA said unless he has his wrong?
Anyway needed to settle for a z1000 shock till i find a decent one with out a piggy back
Tell me what you tink

gsxr7111000


r1ninja

looks good does that, have you got any pics of the whole bike ?

www.r1forum.co.uk

No-one needs more than seven fifty

jamma10566

Looking good but would it look better without the hugger?
Sponsor me please, its a very good cause.
http://www.justgiving.com/James-CoryTakesabullet

davemfox

1993 YZF 750 SP (in PINK/white as a homage to AndyJ)