News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

Dodgy gizmos - beware !

Started by Kwakaholic, April 01, 2007, 06:17:48 PM

Previous topic - Next topic

Shongololo

Here's another, Some bastards at work thought it would be funny to attach flashing caps for a bicycle on to my ol' ZX6. In the morning I had two flats. The weight had bent the valves to a point where there was a hair line crack  where the rubber had started to split. Luckily I wasn't doing my usual spead and they went down slowly so I only noticed the next morning. Luckily for them (or me) I couldn't get to work that day( I most likely would have had a GBH against me or worse). So I use the standard plastic caps just to be safe.

Brotherhood of the Elite. It's not who you are it's what you ride.
http://fullthrottledecals.co.uk

Kwakaholic


Trust   NO C*NT  to mess wi ya Bike !     [naughty] [naughty] [naughty]..... buy a " battery powered pump and  a gauge,  less than £20" ( chop off the cigar lighter

plug  at the end put a fuse link in and a pair of small croca-clips on...... half hour job wi a soldering iron ( well ok twist the wires )  Job Done... reliably and peace o mind ! Amen.  :headbang:
Biking's no more dangerous than a loaded gun.... are ya " F eeling Lucky ? "
...... them thats never tried it don't know what there missin'

Shongololo

Problem was I have a compressor but the valves where split. so wouldn't hold pressure and to top it off I didn't have a wrench to get the wheels off. Had to push it down to th ebike shop, lucky it's only 500 yards.

Brotherhood of the Elite. It's not who you are it's what you ride.
http://fullthrottledecals.co.uk