News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

fitting headers

Started by allsorts, February 21, 2010, 12:30:47 AM

Previous topic - Next topic

allsorts

Have fitted my new Arrow system :tongue3:
But...I'm getting this ticking/knocking noise from the engine.
Had a mech.take a quick look & he said twas coming from the headers & nothing to worry about.Good.
When i fitted the brackets/slip on bushes to the engine there were no washers or seals to make a good seal & she seems to blow from these points.....
Should I have received washers (to seal headers to block) or should I just tighten nuts  even more ???

As u can tell I'm maybe over cautious having dropped her last year,& just want to put her right b/4 I thrash her tits off :downtown:
Chris

scooby

i know on the 04's theres no washers,just the 2 bolt clamps that slide up the headers.

you sure it's fitted properly/not bent?

allsorts

Scoobs,have just be :-/en on zx10r.net,quite a useful site,& it seems like I need some copper gaskets to make a decent seal.
I cant remember removing any from the oe system so may just order them anyway,cant be too expensive??
Her we go again!!!

Charlie

#3
There are copper ring shaped gaskets between the headers and the cylinder head.

They compress in use and help seal the joint. If you did not remove any when you took the old system off, the chances are that the old gaskets are still in there.

Once they become compressed and sooted up they are quite hard to see. To get them out you will need to remove the font pipes and broddle them out with a screwdriver or small pick type tool like dentists use. (The new ones can be held in place with coppaslip or similar while you mount the front pipes again if they start falling out). That sort your sealing problems out

OE part number is
11060-1103 List price is £4.89 each. You will get them cheaper aftermarket though.
Refugee admin from www.gixerjunkies.com

allsorts

Thanks alot Charlie [clap],ebay here we come.....

Charlie

Here you go - Genuine at £17.95 for four
or Pattern at £1.70 each
Refugee admin from www.gixerjunkies.com

allsorts

Blimey Charlie,cheers m8..
Got me own personal shopper :headbang: