News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

Sump removal??

Started by allsorts, February 12, 2010, 10:54:10 PM

Previous topic - Next topic

allsorts

Having had an off at Rockingham at the end of last year & holed my engine casings(fukc they're expensive),
should I drop the sump to check there's no alloy shards/bits of casing in there to damage my engine??

Have already changed oil & filter once since the off,but not been out on the road,only pretending in me garage :emb:

Whats the considered opinion??

scooby

unless it's big chunks it wont settle in the sump,it'll just suspend in the oil and get filtered out.


but it aint a big job to remove it,just make sure yyou pu a fresh seal on.

allsorts

Scooby,do you mean the oil filter will stop any particles damaging the engine?
If so can't I just change the oil + filter?,or would you always drop the sump after an 'off'?
Cheers Chris

scooby

the filter should catch any bits of debris,when you had the casings off did it look like there  was a lot of shit in there? if not then i would think it will be fine. :icon_thumleft:

ZX10R-RACER

take the sump , i`v just stripped my engine after an off and i had metal chunks in my sump  :icon_thumleft:

scooby

yea but yuo rode your bike knowing the gearbox(or something like that) was fookered. :icon_scratch:

ZX10R-RACER

yeah but i crashed at rockingham and a big lump of the starter gear case was floating round in the engine for two track days after that, i did`nt care as i knew i was gonna make love to it over the winter

allsorts

Guys,having replaced original with a now shiny new arrow system;on firing her up I noticed she's very noisy almost slappy at the bottom of the engine,more so than b/4..
This made me think that some shit had got thru..
Warmed her up & slappy noise still there.. :icon_scratch:
Is it me? & what should I look out 4 if it is damaged??
Cheers nd fingers crossed :-/

ZX10R-RACER

well in my case everything was worn but it dose`nt take much for the cam chain to start rattling that was the first thing i noticed , if its only a rattle i`d take the sump of and give it a clean, also pull off the oil pick up and wash it out, my pick up was full of bits of metal and silicone. (and this is the first time its been stripped)