News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Main Menu

Winter mod's finished

Started by ZXRich, March 10, 2009, 08:41:53 PM

Previous topic - Next topic

J-train

Hmm, good on you for making your own bracket, :headbang: Brembo makes a real nice billet bracket for the 83mm calipers for the 04-05/08-09. It is pretty cheap too. (probably not as cheap as homade though)
04 Candy Plasma Blue
06 Kawi Green

ZX10R-RACER

cool if anyone wants a brembo rear caliper i have one its a jonny big dick moto gp rear caliper

ZXRich

Quote from: J-train on March 26, 2009, 07:26:29 AM
Hmm, good on you for making your own bracket, :headbang: Brembo makes a real nice billet bracket for the 83mm calipers for the 04-05/08-09. It is pretty cheap too. (probably not as cheap as homade though)

any chance of posting a link? I might be interested in one of these long term and im sure others will too  :icon_thumleft:.

Rich

tony83

yes brembo do make one but say its for use with aftermarket wheels only (smaller OD on hubs)

zxrich i bet there's just enough room for a rizzla between inside edge of caliper and wheel hub... its like this on the ladybird bracket i bought had to file a bit off edge on caliper (unless you lowered it slightly so pads not in full contact with swept area of disc...)
//http//: [insert/quote/here]

ZXRich

Quote from: tony83 on March 26, 2009, 04:47:39 PM
yes brembo do make one but say its for use with aftermarket wheels only (smaller OD on hubs)

zxrich i bet there's just enough room for a rizzla between inside edge of caliper and wheel hub... its like this on the ladybird bracket i bought had to file a bit off edge on caliper (unless you lowered it slightly so pads not in full contact with swept area of disc...)

Yeh it was far to close a fit,
I removed the inside piston and measured the wall thickness of the casting in that area, I managed to mill away approx 3mm of casting.
This left me 2mm clearance between the caliper and the hub {wall thickness in this area is around 3mm at the thinest point}

I looked at the ladybird site but didnt know how the ferk to order one as it was all in Japanese  [rofl]

How did you go about getting yours?

10rmish


J-train

Quote from: tony83 on March 26, 2009, 04:47:39 PM
yes brembo do make one but say its for use with aftermarket wheels only (smaller OD on hubs)

zxrich i bet there's just enough room for a rizzla between inside edge of caliper and wheel hub... its like this on the ladybird bracket i bought had to file a bit off edge on caliper (unless you lowered it slightly so pads not in full contact with swept area of disc...)

Any Brembo supplier should be able to get it, I got mine from Yoyodyne in the US,  I am running PVM wheels, and I checked it with the  rear BST off my 06 and both fit. It is tight against the hub, so that is probably the clearce issue with stock wheels they are refering too, but they have been wrong before, Brembo claims it fits the 06-07 too, but they are not even close to the same, I tried it.  04-05 and 08-09  I know it fits! I don't have any stock wheels lying around to see exactly what the clearance issue is. Sorry. I have the HP caliper with it and that is a pretty sweet upgrade from the 34G, which is what I originaly had, and what the OP has.
04 Candy Plasma Blue
06 Kawi Green

ZXRich


ZXRich

Quote from: J-train on March 26, 2009, 07:26:29 AM
Hmm, good on you for making your own bracket, :headbang: Brembo makes a real nice billet bracket for the 83mm calipers for the 04-05/08-09. It is pretty cheap too. (probably not as cheap as homade though)

Nice looking front end in your avatar pic J-train, looking forward to you posting some more pictures!  :icon_thumright:

tony83

ahh hello j train you're 9r to 10 r on zx10r.net  :icon_thumleft:
//http//: [insert/quote/here]

tony83

Quote from: ZXRich on March 26, 2009, 07:10:58 PM
Quote from: tony83 on March 26, 2009, 04:47:39 PM
yes brembo do make one but say its for use with aftermarket wheels only (smaller OD on hubs)

zxrich i bet there's just enough room for a rizzla between inside edge of caliper and wheel hub... its like this on the ladybird bracket i bought had to file a bit off edge on caliper (unless you lowered it slightly so pads not in full contact with swept area of disc...)

Yeh it was far to close a fit,
I removed the inside piston and measured the wall thickness of the casting in that area, I managed to mill away approx 3mm of casting.
This left me 2mm clearance between the caliper and the hub {wall thickness in this area is around 3mm at the thinest point}

I looked at the ladybird site but didnt know how the ferk to order one as it was all in Japanese  [rofl]

How did you go about getting yours?

there was a link to a kinda poorly translated site for international orders, think it was 'spiralspinner'  something.
been to a local engineer to make a copy out of two pieces ot plate for simplified mass production, if it works our should be able to offer it to forum  members  :icon_thumleft:
//http//: [insert/quote/here]

slapknacker

if you do i will be intrested aswell.

i realy like the look of a small underslung caliper. :icon_thumleft:

ouit of intrest whats the price of a brembo rear caliper and pads?
also wots the price fr the underslung hanger?

you got any pics of yours Tony?



i'm too thick to make a banner, have tried at the banner maker site, can make one but cant get it uploaded. shyt shyt shty shyt.............
pissed of now!

J-train

Quote from: slapknacker on March 27, 2009, 06:57:56 PM
if you do i will be intrested aswell.

i realy like the look of a small underslung caliper. :icon_thumleft:

ouit of intrest whats the price of a brembo rear caliper and pads?
also wots the price fr the underslung hanger?

you got any pics of yours Tony?

Excuse me for my use of $$$, cause I do not know what the exhange is, but I paid about 200$ for the Brembo Hanger, I was using a 34G (Ducati 2 piston side feed brembo) you can get them for about 50$ on ebay, I then bought the HP caliper, comes with sintered pads, I paid right at 460$ for it.  SO about 660$ total, MSRP on the whole setup is around 750$, so I got a bit of a bargin.




04 Candy Plasma Blue
06 Kawi Green

slapknacker

jesus thats about £500 sterling.

hmmm, nice but think i'll get my suspension reworked first.

i'd spend £250 max on the rear brake. dont use rear brake much at all
so only for the 'bling' factor and smart looks.

then again who knows i've been thinking about the underslung brembo
since i saw the first post!!!! :lol:
i'm too thick to make a banner, have tried at the banner maker site, can make one but cant get it uploaded. shyt shyt shty shyt.............
pissed of now!

horse


Ride Hard! Play Hard!