ZX 10 R Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Pages: [1]   Go Down

Author Topic: Kawasaki-ZX10R-2011-2012-emissions-blanking-plates  (Read 2147 times)

steveo

  • Newbie
  • *
  • Personal BHP 0
  • Posts: 10
Kawasaki-ZX10R-2011-2012-emissions-blanking-plates
« on: September 20, 2012, 11:20:40 AM »

Logged

mc101

  • Club Racer
  • ****
  • Personal BHP 93
  • Posts: 1306
  • Power is everything
Re: Kawasaki-ZX10R-2011-2012-emissions-blanking-plates
« Reply #1 on: September 20, 2012, 11:40:04 AM »

is there any real gain from these? just say them on ebay and wondered if they were worth it


http://www.ebay.co.uk/itm/Kawasaki-ZX10R-2011-2012-emissions-blanking-plates-NEW-/251150570543?pt=UK_Motorcycle_Parts&hash=item3a79bd942f#ht_782wt_1103

The bike will shed about 1kg in weight ...

Thats about the sum of it.
Logged

zx10r-Alan

  • Rookie Racer
  • ***
  • Personal BHP 18
  • Posts: 461
  • Living the dream in Catalunya
Re: Kawasaki-ZX10R-2011-2012-emissions-blanking-plates
« Reply #2 on: September 20, 2012, 11:43:22 AM »

is there any real gain from these? just say them on ebay and wondered if they were worth it


http://www.ebay.co.uk/itm/Kawasaki-ZX10R-2011-2012-emissions-blanking-plates-NEW-/251150570543?pt=UK_Motorcycle_Parts&hash=item3a79bd942f#ht_782wt_1103
For a road bike, i'd say no. If they blank off the crankcase breather pipes etc, you'll need to reroute the breather to a container which will catch any oil vapour otherwise it'll just end up covering the engine over time. This oil vapour also helps to a small degree with upper-cylinder lubrication, something which doesnt matter on a race bike which is rebuilt regularly. Also, from experience, once you reroute the crankcase breathers, you have to increase fueling to compensate for the engine not burning the oil vapour. Further to all that, releasing crankcase emissions into the atmosphere is likely to get your bike a prohibition notice if you were stopped by VOSA or a copper who knows his stuff about engines.
Logged
Biker-friendly self-catering accommodation in Cataluña, España
http://www.goodlifefarm.es/

Jester

  • Pit Crew
  • *
  • Personal BHP 9
  • Posts: 123
  • North Kent
Re: Kawasaki-ZX10R-2011-2012-emissions-blanking-plates
« Reply #3 on: September 22, 2012, 09:20:34 PM »

These have nothing to do with the crankcase breather system.

They block off the fresh air\PAIR\Kleen or whatever you want to call it reed valves on the cam cover allowing removal of an air valve that would normally allow extra air to enter the exhaust to help with emissions, under certain rev\load\throttle conditions.
It is what causes a lot of the exhaust popping - this air is combusting with the unburnt fuel in the pipes.
Some tuners recommend blocking them off to allow correct air\fuel ration tuning throughout the rev range.
You will also need to fiddle the wiring a bit to stop a warning light on some bikes.

If you like to remove all the unrequired crap on a bike, do it. If you're lazy, tightfisted, like a noisy popping exhaust, are a tree hugger or just don't see the point then don't!
Logged
Embarrassing myself on two wheels since 1995...

r1ninja

  • GP Hero
  • ******
  • Personal BHP 269
  • Posts: 5070
  • Salisbury Plain
Re: Kawasaki-ZX10R-2011-2012-emissions-blanking-plates
« Reply #4 on: September 23, 2012, 10:50:27 AM »

As someone has mentioned they  allow the dyno tuner to setup the mixture more accurately, without the emissions gubbins fudging the mixture readings
Logged

www.r1forum.co.uk

No-one needs more than seven fifty
Pages: [1]   Go Up
 

Page created in 0.106 seconds with 21 queries.